Bobcat E10e

Bobcat E10e battery-electric 1-tonne mini excavator (the current E10 in Bobcat's European range alongside the diesel E10z; Bobcat Middle East & Africa does not list an E10), from Bobcat's European brochure B4501263-EN (12-22, file dated 23-09-2025); standard dipperstick, TOPS canopy.

USAGlobal

digging depth: 1.82 m
Operating weight: 1,201 kg

Side

Front

Overall length: 2.793 m
Track length: 1.28 m
Track length on ground: 0.968 m
Swing centre to blade: 0.987 m
Swing centre to front (transport): 2.153 m
Overall height (to top of cab): 2.209 m
Height to top of engine cover: 0.992 m
Ground clearance, counterweight: 0.363 m
Blade height: 0.22 m
Tail swing radius: 0.55 m
Width of crawler (tracks expanded): 1.1 m
Shoe width: 0.18 m

Dimensions

Width of crawler (J, undercarriage retracted): 0.71 m

Performance

BMax digging reach (Working area B): 3.145 m
CMax reach at ground level (Working area C): 3.093 m
KMax digging depth (Working area K): 1.82 m
JMax vertical wall digging depth (Working area J): 1.383 m
HMax digging height (Working area H): 2.685 m
IMax dumping height (Working area I): 1.818 m
DFront swing radius (minimum) (Working area D, from the machine centre line): 1.374 m
EMax blade height (Working area E, above ground): 0.196 m
FMax blade depth (Working area F, below ground): 0.23 m
ABucket rotation (Working area A): 196°
MBoom swing offset, left (Plan view M): 0.413 m
NBoom swing offset, right (Plan view N): 0.471 m
Boom swing, left: 67°
Boom swing, right: 64°
Bucket digging force: 8 kN
Arm digging force: 6 kN
Swing speed (Slew rate): 10.2 rpm
Drawbar pull: 10 kN
Travel speed (high): 2.9 km/h
Travel speed (low): 1.8 km/h

Weight

Operating weight (With bucket, ISO 6016): 1,201 kg
Transport mass (No attachment): 1,102 kg
Ground pressure (Rubber tracks): 28.8 kPa

Electric drive

Engine model (32 V (AC)): Schabmueller / Electric AM (TSA200) electric motor
Maximum power (At 3,000 rpm): 7.5 kW (10 hp)
Max torque (At 2,400 rpm): 30 Nm
Battery: Li-ion, 51.8 V (DC)
Battery capacity: 11.52 kWh (2 x 5.76)

Hydraulics

Pump flow (Total hydraulic capacity, triple gear pump): 25 L/min
Max pressure (System pressure (auxiliary AUX1 relief)): 190 bar
Auxiliary circuit flow (AUX1): 20 L/min

Service capacities

Hydraulic tank (Hydraulic reservoir): 2.6 L
Hydraulic system, with tank: 9.4 L

Service intervals

Hydraulic oil and filter: 500 hours
Final drive oil: 1,000 hours
Grease fittings, except frame (every 10 hours or daily): 10 hours
Grease fittings, frame: 50 hours
Battery, inverter and motor cables (check) (or 12 months; check cables and connections): 250 hours