Bobcat E10e

Bobcat E10e battery-electric 1-tonne mini excavator (the current E10 in Bobcat's European range alongside the diesel E10z; Bobcat Middle East & Africa does not list an E10), from Bobcat's European brochure B4501263-EN (12-22, file dated 23-09-2025); standard dipperstick, TOPS canopy.

USAGlobal

digging depth: 6 ft
Operating weight: 2,648 lb

Side

Front

Overall length: 9.2 ft
Track length: 4.2 ft
Track length on ground: 3.2 ft
Swing centre to blade: 3.2 ft
Swing centre to front (transport): 7.1 ft
Overall height (to top of cab): 7.2 ft
Height to top of engine cover: 3.3 ft
Ground clearance, counterweight: 1.2 ft
Blade height: 0.7 ft
Tail swing radius: 1.8 ft
Width of crawler (tracks expanded): 3.6 ft
Shoe width: 0.6 ft

Dimensions

Width of crawler (J, undercarriage retracted): 2.3 ft

Performance

BMax digging reach (Working area B): 10.3 ft
CMax reach at ground level (Working area C): 10.1 ft
KMax digging depth (Working area K): 6 ft
JMax vertical wall digging depth (Working area J): 4.5 ft
HMax digging height (Working area H): 8.8 ft
IMax dumping height (Working area I): 6 ft
DFront swing radius (minimum) (Working area D, from the machine centre line): 4.5 ft
EMax blade height (Working area E, above ground): 0.6 ft
FMax blade depth (Working area F, below ground): 0.8 ft
ABucket rotation (Working area A): 196°
MBoom swing offset, left (Plan view M): 1.4 ft
NBoom swing offset, right (Plan view N): 1.5 ft
Boom swing, left: 67°
Boom swing, right: 64°
Bucket digging force: 1,865 lbf
Arm digging force: 1,248 lbf
Swing speed (Slew rate): 10.2 rpm
Drawbar pull: 2,227 lbf
Travel speed (high): 1.8 mph
Travel speed (low): 1.1 mph

Weight

Operating weight (With bucket, ISO 6016): 2,648 lb
Transport mass (No attachment): 2,429 lb
Ground pressure (Rubber tracks): 28.8 kPa

Electric drive

Engine model (32 V (AC)): Schabmueller / Electric AM (TSA200) electric motor
Maximum power (At 3,000 rpm): 10 hp
Max torque (At 2,400 rpm): 22 lbf·ft
Battery: Li-ion, 51.8 V (DC)
Battery capacity: 11.52 kWh (2 x 5.76)

Hydraulics

Pump flow (Total hydraulic capacity, triple gear pump): 6.6 US gpm
Max pressure (System pressure (auxiliary AUX1 relief)): 2,756 psi
Auxiliary circuit flow (AUX1): 5.3 US gpm

Service capacities

Hydraulic tank (Hydraulic reservoir): 0.7 US gal
Hydraulic system, with tank: 2.5 US gal

Service intervals

Hydraulic oil and filter: 500 hours
Final drive oil: 1,000 hours
Grease fittings, except frame (every 10 hours or daily): 10 hours
Grease fittings, frame: 50 hours
Battery, inverter and motor cables (check) (or 12 months; check cables and connections): 250 hours