EF Logo

Bobcat E10e vs John Deere 35 P-Tier

The John Deere 35 P-Tier is the heavier machine, at 3.52 t against 1.2 t.

The Bobcat E10e is ahead on: turns tighter, narrower to transport, lower to transport. The John Deere 35 P-Tier is ahead on: digs deeper, reaches further, dumps higher, more digging or pushing force, faster.

Below, every figure both makers publish sits side by side, with the Bobcat E10e and the John Deere 35 P-Tier drawn to the same scale from their dimension drawings.

  1. Bobcat · mini excavator

    Bobcat E10e

    Full specsPDF

  2. John Deere · mini excavator

    John Deere 35 P-Tier

    Full specsPDF

  3. Add a model

At a glance

Bold is the machine ahead on each figure, with its lead.

FigureBobcat E10eJohn Deere 35 P-Tier
Operating weight1,201 kg3,520 kg
Max digging depthHigher is better1.82 m3.06 m+68%
Max digging reachHigher is better3.145 m5.21 m+66%
Max dumping heightHigher is better1.818 m3.46 m+90%
Bucket digging forceHigher is better8 kN27 kN+227%
Travel speed (high)Higher is better2.9 km/h4.3 km/h+48%
Tail swing radiusLower is better0.55 m+37%0.87 m
Width of crawlerLower is better0.71 m+59%1.74 m
Overall height (to top of cab)Lower is better2.209 m+11%2.48 m
Overall length2.793 m4.64 m

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Dimensions

Overall length2.793 mTransport position4.64 m
Track length1.28 mUndercarriage length2.11 mundercarriage length
Track length on ground0.968 mSprocket to idler centres1.66 msprocket centre to idler centre
Swing centre to blade0.987 mMachine centre line to bladeNot published
Swing centre to front (transport)2.153 mNot published
Overall height (to top of cab)2.209 mTop of TOPS canopy2.48 mcanopy and cab
Engine cover height0.992 m1.53 mengine cover height
Ground clearance, counterweight0.363 mGround to underside of the upperstructure0.55 m
Blade height0.22 m0.373 m
Tail swing radius0.55 mPlan view0.87 m
Width of crawler (tracks expanded)1.1 mNot published
Width of crawler0.71 mJ, undercarriage retracted1.74 mundercarriage width
Shoe width0.18 mRubber track0.3 mrubber track
Upperstructure widthNot published1.55 m
Ground clearance (minimum)Not published0.28 m

Performance

Max digging reach3.145 mWorking area B5.21 m
Max reach at ground level3.093 mWorking area CNot published
Max digging depth1.82 mWorking area K3.06 m
Max vertical wall digging depth1.383 mWorking area JNot published
Max digging height2.685 mWorking area H4.87 m
Max dumping height1.818 mWorking area I3.46 m
Min front swing radius1.374 mWorking area D, from the machine centre line2.08 m
Max blade height0.196 mWorking area E, above ground0.36 m
Max blade depth0.23 mWorking area F, below ground0.4 m
Bucket rotation196°Working area ANot published
Boom swing offset, left0.413 mPlan view MNot published
Boom swing offset, right0.471 mPlan view NNot published
Boom swing, left67°Not published
Boom swing, right64°Not published
Bucket digging force8 kN27 kNISO
Arm digging force6 kN19 kN
Swing speed10.2 rpmSlew rate9.0 rpm
Max drawbar pull10 kNNot published
Travel speed (high)2.9 km/h4.3 km/h
Travel speed (low)1.8 km/h2.8 km/h
Bucket capacityNot published0.11 m³
Boom swingNot published72 deg. left / 62 deg. right (canopy); 62 / 62 deg. (cab)independent swing boom

Weight

Operating weight1,201 kgWith bucket, ISO 60163,520 kg
Transport mass1,102 kgNo attachmentNot published
Ground pressure28.8 kPaRubber tracks32.0 kPa (4.6 psi) canopy / 33.0 kPa (4.8 psi) cab, standard arm and counterweight, rubber track
Operating weight (cab)Not published3,690 kg
Operating weight (long arm, canopy)Not published3,783 kg
Operating weight (long arm, cab)Not published3,953 kg
CounterweightNot published540 kgstandard
Additional counterweightNot published240 kgfitted with the long arm
Optional angle bladeNot published296 kgadded weight

Electric drive

Engine modelSchabmueller / Electric AM (TSA200) electric motor32 V (AC)Yanmar 3TNV88F
Maximum power7.5 kW (10 hp)At 3,000 rpmNot published
Max torque30 NmAt 2,400 rpmNot published
BatteryLi-ion, 51.8 V (DC)Not published
Battery capacity11.52 kWh (2 x 5.76)Not published

Hydraulics

Pump flow25 L/minTotal hydraulic capacity, triple gear pump2 x 38.4 L/min (piston) + 22.8 L/min (gear)
Max pressure190 barSystem pressure (auxiliary AUX1 relief)Not published
Auxiliary circuit flow, primary20 L/minNot published
Hydraulic systemNot publishedOpen centre, 2 variable-displacement piston pumps and 1 fixed gear pump
Auxiliary flowNot published61 L/min

Service capacities

Hydraulic tank2.6 LHydraulic reservoir32 L
Hydraulic system, with tank9.4 LNot published
Fuel tankNot published42 L
Engine oil, with filterNot published7.2 L
Cooling systemNot published5 L

Service intervals

Hydraulic oil and filter500 hoursNot published
Final drive oil1,000 hoursNot published
Grease fittings, except frame10 hoursevery 10 hours or dailyNot published
Grease fittings, frame50 hoursNot published
Battery, inverter and motor cables (check)250 hoursor 12 months; check cables and connectionsNot published

Engine

EmissionsNot publishedEPA Final Tier 4 / EU Stage IV
DisplacementNot published1.6 L
Net powerNot published17.4 kW (23.3 hp)ISO 9249, at 2,400 rpm

Blade

Blade widthNot published1.74 m

Front attachment

Boom lengthNot published2.465 m
Stick lengthNot published1.315 mstandard arm
Stick length, long stickNot published1.715 m

Sources: Bobcat Electric Compact Excavator E10e, E19e brochure B4501263-EN (EU, English) · John Deere 35 P-Tier Compact Excavator brochure ME35PAU (23-07)

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

0 m1 m2 m3 m4 m
Bobcat E10eJohn Deere 35 P-TierSame scale, front edges and ground lined up.

Bobcat E10e vs John Deere 35 P-Tier: questions

Which is bigger, the Bobcat E10e or John Deere 35 P-Tier?

By operating weight the John Deere 35 P-Tier is the biggest at 3.52 t, then the Bobcat E10e at 1.2 t.

Which digs deeper, the Bobcat E10e or John Deere 35 P-Tier?

The John Deere 35 P-Tier: Bobcat E10e 1.82 m, John Deere 35 P-Tier 3.06 m (max digging depth), a 68% difference.

Which reaches further, the Bobcat E10e or John Deere 35 P-Tier?

The John Deere 35 P-Tier: Bobcat E10e 3.145 m, John Deere 35 P-Tier 5.21 m (max digging reach), a 66% difference.

Which turns tighter, the Bobcat E10e or John Deere 35 P-Tier?

The Bobcat E10e: Bobcat E10e 0.55 m, John Deere 35 P-Tier 0.87 m (tail swing radius), a 37% difference.

Which is narrower to transport, the Bobcat E10e or John Deere 35 P-Tier?

The Bobcat E10e: Bobcat E10e 0.71 m, John Deere 35 P-Tier 1.74 m (width of crawler), a 59% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.

More comparisons

EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.