Bobcat E10e vs Bobcat E50

The Bobcat E50 is the heavier machine, at 5.15 t against 1.2 t.

The Bobcat E50 is ahead on: digs deeper, reaches further, dumps higher, more digging or pushing force, faster.

Below, every figure both makers publish sits side by side, with the Bobcat E10e and the Bobcat E50 drawn to the same scale from their dimension drawings.

Bobcat · mini excavator
Bobcat E10e
Change modelFull specs PDF
Bobcat · mini excavator
Bobcat E50
Change modelFull specs PDF
Add a modelUp to four

At a glance

Bold is the machine ahead on each figure, with its lead.

Figure	Bobcat E10e	Bobcat E50
Operating weight	1,201 kg	5,151 kg
Max digging depthHigher is better	1.82 m	3.478 m+91%
Max reach at ground levelHigher is better	3.093 m	5.889 m+90%
Max dumping heightHigher is better	1.818 m	3.915 m+115%
Bucket digging forceHigher is better	8 kN	42 kN+410%
Travel speed (high)Higher is better	2.9 km/h	4.5 km/h+55%

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Differences only(59)

FigureBobcat E10e Bobcat E50

Dimensions

Overall length2.793 mTransport positionNot published

Track length1.28 mUndercarriage lengthNot published

Track length on ground0.968 mSprocket to idler centresNot published

Swing centre to blade0.987 mMachine centre line to bladeNot published

Swing centre to front (transport)2.153 mNot published

Overall height (to top of cab)2.209 mTop of TOPS canopyNot published

Engine cover height0.992 mNot published

Ground clearance, counterweight0.363 mGround to underside of the upperstructureNot published

Blade height0.22 mNot published

Tail swing radius0.55 mPlan viewNot published

Width of crawler (tracks expanded)1.1 mNot published

Width of crawler0.71 mJ, undercarriage retractedNot published

Shoe width0.18 mRubber trackNot published

Overall widthNot published1.849 m

Performance

Max digging reach3.145 mWorking area BNot published

Max reach at ground level3.093 mWorking area C5.889 mStandard arm; 6,278 mm with long arm

Max digging depth1.82 mWorking area K3.478 mStandard arm; 3,878 mm with long arm

Max vertical wall digging depth1.383 mWorking area JNot published

Max digging height2.685 mWorking area HNot published

Max dumping height1.818 mWorking area I3.915 m

Min front swing radius1.374 mWorking area D, from the machine centre lineNot published

Max blade height0.196 mWorking area E, above groundNot published

Max blade depth0.23 mWorking area F, below groundNot published

Bucket rotation196°Working area ANot published

Boom swing offset, left0.413 mPlan view MNot published

Boom swing offset, right0.471 mPlan view NNot published

Boom swing, left67°Not published

Boom swing, right64°Not published

Bucket digging force8 kN42 kN

Arm digging force6 kN31 kN

Swing speed10.2 rpmSlew rateNot published

Max drawbar pull10 kNNot published

Travel speed (high)2.9 km/h4.5 km/h

Travel speed (low)1.8 km/h2.8 km/h

Rated lift capacityNot published3,060 kg

Weight

Operating weight1,201 kgWith bucket, ISO 60165,151 kg5,351 kg with long arm and counterweight

Transport mass1,102 kgNo attachmentNot published

Ground pressure28.8 kPaRubber tracks29.0 kPa

Track widthNot published0.4 mStandard track

Electric drive

Engine modelSchabmueller / Electric AM (TSA200) electric motor32 V (AC)Not published

Maximum power7.5 kW (10 hp)At 3,000 rpmNot published

Max torque30 NmAt 2,400 rpmNot published

BatteryLi-ion, 51.8 V (DC)Not published

Battery capacity11.52 kWh (2 x 5.76)Not published

Hydraulics

Pump flow25 L/minTotal hydraulic capacity, triple gear pumpNot published

Max pressure190 barSystem pressure (auxiliary AUX1 relief)Not published

Auxiliary circuit flow, primary20 L/minNot published

Auxiliary circuit flowNot published76 L/min

Auxiliary circuit reliefNot published210 barAuxiliary hydraulic pressure

Service capacities

Hydraulic tank2.6 LHydraulic reservoirNot published

Hydraulic system, with tank9.4 LNot published

Fuel tankNot published72 L

Service intervals

Hydraulic oil and filter500 hoursNot published

Final drive oil1,000 hoursNot published

Grease fittings, except frame10 hoursevery 10 hours or dailyNot published

Grease fittings, frame50 hoursNot published

Battery, inverter and motor cables (check)250 hoursor 12 months; check cables and connectionsNot published

Engine

EmissionsNot publishedTier 4

Gross powerNot published37.1 kW (49.7 hp)

Sources: Bobcat Electric Compact Excavator E10e, E19e brochure B4501263-EN (EU, English) · Bobcat Latin America E50 Mini Excavator product page (specifications)

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

Bobcat E10eBobcat E50Same scale, front edges and ground lined up.

Bobcat E10e vs Bobcat E50: questions

Which is bigger, the Bobcat E10e or Bobcat E50?

By operating weight the Bobcat E50 is the biggest at 5.15 t, then the Bobcat E10e at 1.2 t.

Which digs deeper, the Bobcat E10e or Bobcat E50?

The Bobcat E50: Bobcat E10e 1.82 m, Bobcat E50 3.478 m (max digging depth), a 91% difference.

Which reaches further, the Bobcat E10e or Bobcat E50?

The Bobcat E50: Bobcat E10e 3.093 m, Bobcat E50 5.889 m (max reach at ground level), a 90% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.