Bobcat E10e specs
- digging depth
- 1.82 m
- operating weight
- 1,201 kg
Bobcat E10e dimensions
| Letter | Dimension | Metric and imperial |
|---|---|---|
| H | Overall length | 2.793 m9.2 ft |
| G | Track length | 1.28 m4.2 ft |
| D | Track length on ground | 0.968 m3.2 ft |
| E | Swing centre to blade | 0.987 m3.2 ft |
| F | Swing centre to front (transport) | 2.153 m7.1 ft |
| K | Overall height (to top of cab) | 2.209 m7.2 ft |
| C | Height to top of engine cover | 0.992 m3.3 ft |
| B | Ground clearance, counterweight | 0.363 m1.2 ft |
| A | Blade height | 0.22 m0.7 ft |
| P | Tail swing radius | 0.55 m1.8 ft |
| J | Width of crawler (tracks expanded) | 1.1 m3.6 ft |
| L | Shoe width | 0.18 m0.6 ft |
Bobcat E10e specifications
Bobcat E10e battery-electric 1-tonne mini excavator (the current E10 in Bobcat's European range alongside the diesel E10z; Bobcat Middle East & Africa does not list an E10), from Bobcat's European brochure B4501263-EN (12-22, file dated 23-09-2025); standard dipperstick, TOPS canopy.
32 figures in 5 groups
Dimensions
- Width of crawler
- 0.71 mJ, undercarriage retracted
Performance
- Max digging reach
- 3.145 mWorking area B
- Max reach at ground level
- 3.093 mWorking area C
- Max digging depth
- 1.82 mWorking area K
- Max vertical wall digging depth
- 1.383 mWorking area J
- Max digging height
- 2.685 mWorking area H
- Max dumping height
- 1.818 mWorking area I
- Front swing radius (minimum)
- 1.374 mWorking area D, from the machine centre line
- Max blade height
- 0.196 mWorking area E, above ground
- Max blade depth
- 0.23 mWorking area F, below ground
- Bucket rotation
- 196°Working area A
- Boom swing offset, left
- 0.413 mPlan view M
- Boom swing offset, right
- 0.471 mPlan view N
- Boom swing, left
- 67°
- Boom swing, right
- 64°
- Bucket digging force
- 8 kN
- Arm digging force
- 6 kN
- Swing speed
- 10.2 rpmSlew rate
- Drawbar pull
- 10 kN
- Travel speed (high)
- 2.9 km/h
- Travel speed (low)
- 1.8 km/h
Weight
- Operating weight
- 1,201 kgWith bucket, ISO 6016
- Transport mass
- 1,102 kgNo attachment
- Ground pressure
- 28.8 kPaRubber tracks
Electric drive
- Engine model
- Schabmueller / Electric AM (TSA200) electric motor32 V (AC)
- Maximum power
- 7.5 kW (10 hp)At 3,000 rpm
- Max torque
- 30 NmAt 2,400 rpm
- Battery
- Li-ion, 51.8 V (DC)
- Battery capacity
- 11.52 kWh (2 x 5.76)
Hydraulics
- Pump flow
- 25 L/minTotal hydraulic capacity, triple gear pump
- Max pressure
- 190 barSystem pressure (auxiliary AUX1 relief)
- Auxiliary circuit flow (AUX1)
- 20 L/min
Source: Bobcat Electric Compact Excavator E10e, E19e brochure B4501263-EN (EU, English)
Bobcat E10e service
What each system holds and when Bobcat says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.
Loading the 3D machine...
Drag to turn · scroll to zoom · built from the maker's drawing; markers show where each system is
- Battery, inverter and motor cables (check), change every
- 250 hours
- Battery
- Li-ion, 51.8 V (DC)
- Battery capacity
- 11.52 kWh (2 x 5.76)
The lithium-ion pack is the machine's fuel tank and its dearest part: charge it after each shift rather than running it flat, and keep the cables and plugs tight and dry.
Confirm fluid grades in your machine's operator's manual: they vary by build year and climate.
Service capacities
- Hydraulic tank
- 2.6 L0.7 US gal
- Hydraulic system, with tank
- 9.4 L2.5 US gal
Service intervals
- Hydraulic oil and filter
- 500 hours
- Final drive oil
- 1,000 hours
- Grease fittings, except frame
- 10 hours
- Grease fittings, frame
- 50 hours
- Battery, inverter and motor cables (check)
- 250 hours
Compare the Bobcat E10e
The machines nearest in size, each drawn beside this one at the same scale.
Moving a Bobcat E10e
A first look from the sheet. Your haulier or forwarder confirms the load.
- Length
- 2.79m
- Width
- 0.71m
- Height
- 2.21m
- Weight
- 1.2t
- RoadA plant trailer behind a pickup
- SeaFits a 20 ft flat rack, in gauge
Bobcat E10e prices and listings in the UAE
Asking prices on EquipmentsFinder, in AED, refreshed daily.
Typical hire, per daymedian of 25
AED 1,200 /day
No priced Bobcat E10e for hire yet: this is all mini excavators
No Bobcat E10e for rent listed right now.
Request a Bobcat E10eAbout the Bobcat E10e
The Bobcat E10e is a 1.2-tonne mini excavator with a Schabmueller / Electric AM (TSA200) electric motor engine.
A mini excavator: a compact tracked digger, light enough to trailer and narrow enough for gardens, basements and utility work between buildings.
Typical jobs: trenching for services, landscaping and garden work, footings and foundations, demolition in tight spaces.
Bobcat E10e questions
How much does a Bobcat E10e weigh?
1,201 kg (2,648 lb) in working order, with fuel, operator and standard attachment.
How deep can a Bobcat E10e dig?
The Bobcat E10e digs to 1.82 m (6 ft).
How wide is a Bobcat E10e?
1.1 m (3.6 ft) wide, which decides the gates and paths it gets through.
What are the Bobcat E10e's dimensions?
2.79 m long, 0.71 m wide and 2.21 m high, from Bobcat's dimension drawing.
How do you transport a Bobcat E10e?
Road: a plant trailer behind a pickup. Sea: fits a 20 ft flat rack, in gauge.
How much oil does a Bobcat E10e take?
Hydraulic oil: 9.4 L (2.5 US gal).
What are the Bobcat E10e's main competitors?
The machines nearest it in size are the Kubota U17, the JCB 8018, the Bobcat E20. Each has a side-by-side comparison on EquipmentsFinder.
Is the Bobcat E10e sold in the UAE?
Not new through a Gulf dealer: it is sold in the USA and other markets worldwide. Used and imported machines do come up on EquipmentsFinder.
What is a Bobcat E10e used for?
A mini excavator: a compact tracked digger, light enough to trailer and narrow enough for gardens, basements and utility work between buildings. Typical jobs: trenching for services, landscaping and garden work, footings and foundations, demolition in tight spaces.
Need a Bobcat E10e on site?
Post the job - where, when and for how long. Suppliers with a machine contact you directly. Free to post.
