EF Logo

Case 580SN vs JCB 3DX

The Case 580SN is the heavier machine, at 8.08 t against 7.52 t, and the Case 580SN has more power (71 kW against 68.6 kW).

The Case 580SN is ahead on: more power, more torque, digs deeper, reaches further, more hydraulic flow, bigger fuel tank, lower to transport. The JCB 3DX is ahead on: dumps higher, bigger bucket or body.

Below, every figure both makers publish sits side by side, with the Case 580SN and the JCB 3DX drawn to the same scale from their dimension drawings.

  1. Case · backhoe loader

    Case 580SN

    Full specsPDF

  2. JCB · backhoe loader

    JCB 3DX

    Full specsPDF

  3. Add a model

At a glance

Bold is the machine ahead on each figure, with its lead.

FigureCase 580SNJCB 3DX
Operating weight8,078 kg7,524 kg
Gross powerHigher is better72 kW+5%68.6 kW
Max torqueHigher is better453 Nm+11%408 Nm
Max dig depthHigher is better4.41 m+4%4.24 m
Reach at ground level, from slew centreHigher is better5.55 m+3%5.4 m
Dump height with standard bucketHigher is better2.69 m2.74 m+2%
Shovel capacityHigher is better0.79 m³1.1 m³+39%
Pump flowHigher is better156 L/min+27%123 L/min
Fuel tankHigher is better132 L+3%128 L
Cab roof heightLower is better2.72 m+5%2.87 m
Total travel length7.12 m5.96 m

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Dimensions

Total travel length7.12 m5.96 m
Total travel length (Long Lip bucket with quick coupler)7.1 mNot published
Total travel height3.37 mTransport height, 4WD, 19.5 L x 24.0 tyres3.61 m
Cab roof height2.72 m2.87 m
Height to top of canopy2.66 mNot published
Height to top of exhaust stack2.62 mNot published
Wheelbase2.15 m2.24 m
Overall transport width2.17 mNot published
Ground clearance at backhoe frame0.381 mNot published
Angle of departure19°Not published
Front wheel tread gauge1.72 m12.0 L x 16.5 front tyresNot published
Width over tyres2.06 m12.0 L x 16.5 front tyresNot published
Shovel width (GP shovel)2.09 mBucket cutting edge width, Long Lip bucket2.35 m
Stabiliser spread, operating (flip pad)2.82 mNot published
Turning radius, curb to curb, 4WD engaged, brakes on3.45 mNot published
Turning radius, 4WD engaged, brakes off4.21 mNot published
Slew centre to rear axle centreNot published1.32 m
Ground clearance (stabiliser foot)Not published0.36 m
Slew ground clearanceNot published0.53 m
Rear frame widthNot published2.24 m

Backhoe performance

Max dig depth4.41 m4.24 m
Max dig depth (Extendahoe extended)5.47 mNot published
Digging depth, 610 mm flat bottom4.37 mNot published
Digging depth, 2440 mm flat bottom4.06 mNot published
Reach at ground level, from slew centre5.55 m5.4 m
Reach at ground level, from slew centre (Extendahoe extended)6.58 mNot published
Reach from rear axle centreline at ground line6.66 m6.72 m
Max load-over height3.67 mLoading height, standard backhoe4.18 m
Loading reach1.41 mNot published
Bucket tearout force61 kN5,700 kgf
Bucket tearout force (Power Lift)64 kNNot published
Dipper tearout force39 kN3,010 kgf
Dipper tearout force (Power Lift)40 kNNot published
Swing arc180°Not published

Loader performance

Shovel capacity0.79 m³1.1 m³GP shovel
Lift capacity to full height3,195 kgLong Lip bucket, calculated valueNot published
Shovel breakout force50 kN6,010 kgf
Lift breakout force45 kN5,300 kgf
Dump height with standard bucket2.69 m2.74 m
Maximum operating height (loader)4.18 mNot published
Maximum hinge pin height3.42 mNot published
Bucket hinge pin height at SAE carry0.345 mNot published
Dump angle at full height47°43°
Dump reach at full height, 45° dump, from bumper0.801 mNot published
Maximum bucket rollback at ground level42°Not published
Bucket rollback at SAE carry42°Not published
Loader digging depth0.155 mLong Lip bucket, bucket flatNot published
Reach from front axle centreline, bucket on ground2.07 mNot published

Weight

Operating weight8,078 kg7,524 kg
Operating weight (configuration 2)8,958 kgNot published
Shipping weightNot published7,314 kg

Engine

Engine modelFPT F5BFL413B, diesel 4-stroke, turbocharged, HPCRJCB DIESELMAX 444, turbocharged
EmissionsTier 4 FinalNot published
Cylinders44
Displacement3.4 L4.4 L
Gross power72 kW (97 hp)At 2,200 rpm68.6 kW (92 hp)at 2,200 rpm
Net power71 kW (95 hp)At 2,200 rpmNot published
Max torque453 NmGross at 1,400 rpm; net 452 N·m408 Nmat 1,200 rpm

Transmission

Transmission4F/4R Power Shuttle synchromesh (standard); PowerDrive H-Type 4F/4R powershift with auto shift and direct drive (optional)Not published
Top speed39.6 km/hNot published
TypeNot publishedJCB Synchro Shuttle, torque converter
GearsNot published4 forward, 4 reverse
Speed, gear 1Not published7.3 km/h
Speed, gear 2Not published11.7 km/h
Speed, gear 3Not published22 km/h
Top speed, gear 4Not published40 km/h

Hydraulics

Hydraulic systemBosch Rexroth Series 31 variable-displacement axial piston pump; closed-center loader valveNot published
Pump flow156 L/minLoader and backhoe flow at rated engine rpm123 L/min
Max pressure238 barNot published
PumpNot published2-section gear pump
Main relief valveNot published228 bar

Tyres

Front tyres4WD: 12.0 L x 16.5 or 12.5/80 x 18.0, 10-ply; 2WD: 11.0 L x 16.0, 10-ply12.5x18-12PR
Rear tyres19.5 L x 24.0 or 500/70 R24, 10-ply16.9x28-12PR

Service capacities

Fuel tank132 L128 L
DEF tank13.5 LNot published
Hydraulic system, with tank118 L130 L
Hydraulic reservoir, with filter50.5 LNot published
Engine oil, with filter8 L14 L
Cooling system18 LWith heater16.5 L
Transmission (4WD standard)19.4 LNot published
Rear axle13.6 LDifferential and planetariesJCB PD70, Max-Trac differential
Front drive axle, differential7.7 L4WD, 580N/580SNNot published
Front axle planetary hub, each0.5 L4WD, 580N/580SNNot published
Gearbox, with filterNot published16 L

Service intervals

Engine oil and filter500 hours500 hours
Hydraulic oil and filters1,000 hoursNot published
Transmission oil and filter1,000 hoursNot published
Front axle oil1,000 hoursNot published
Rear axle oil1,000 hoursNot published
Hydraulic filterNot published500 hours
Transmission filterNot published500 hours
Transmission oilNot published1,000 hours
Axle oilNot published1,000 hours
Hydraulic oilNot published2,000 hours

Backhoe

Side reach to machine centre lineNot published6.02 m
Max working heightNot published5.97 m
Total kingpost travelNot published1.06 m
Bucket rotationNot published185°

Loader

Max payloadNot published1,850 kg
Max lift heightNot published3.23 m
Load-over heightNot published3.23 m
Pin heightNot published3.45 m
Reach at groundNot published1.4 m

Axles, brakes and tyres

Front axleNot publishedJCB SD55, 4WD steer, 16° oscillation
Service brakesNot publishedOil-immersed multi-disc, rear axle
Turning circle, outside widest loader bucketNot published9.79 minner wheel braked
ElectricsNot published12 V, 130 Ah battery, 90 A alternator

Sources: Case 580SN Construction King Backhoe Loader specifications (Tier 4 Final, 2023) · JCB 3DX specification sheet 9999/5544B, issue 1 (06/13)

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

0 m1 m2 m3 m4 m5 m6 m7 m
Case 580SNJCB 3DXSame scale, front edges and ground lined up.

Case 580SN vs JCB 3DX: questions

Which is bigger, the Case 580SN or JCB 3DX?

By operating weight the Case 580SN is the biggest at 8.08 t, then the JCB 3DX at 7.52 t.

Which has more power, the Case 580SN or JCB 3DX?

The Case 580SN: Case 580SN 72 kW (97 hp), JCB 3DX 68.6 kW (92 hp) (gross power), a 5% difference.

Which digs deeper, the Case 580SN or JCB 3DX?

The Case 580SN: Case 580SN 4.41 m, JCB 3DX 4.24 m (max dig depth), a 4% difference.

Which reaches further, the Case 580SN or JCB 3DX?

The Case 580SN: Case 580SN 5.55 m, JCB 3DX 5.4 m (reach at ground level, from slew centre), a 3% difference.

Which has the bigger bucket, the Case 580SN or JCB 3DX?

The JCB 3DX: Case 580SN 0.79 m³, JCB 3DX 1.1 m³ (shovel capacity), a 39% difference.

Which has the bigger fuel tank, the Case 580SN or JCB 3DX?

The Case 580SN: Case 580SN 132 L, JCB 3DX 128 L (fuel tank), a 3% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.

More comparisons

EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.