EF Logo

Bobcat S570 vs Cat 226

The Bobcat S570 is the heavier machine, at 2.9 t against 2.65 t, and the Cat 226 has more power (49.1 kW against 45.5 kW).

The Bobcat S570 is ahead on: dumps higher, reaches higher, lifts or carries more, bigger fuel tank, lower to transport. The Cat 226 is ahead on: more power, more torque, more hydraulic flow, faster, turns tighter, narrower to transport.

Below, every figure both makers publish sits side by side, with the Bobcat S570 and the Cat 226 drawn to the same scale from their dimension drawings.

  1. Bobcat · skid steer loader

    Bobcat S570

    Full specsPDF

  2. Cat · skid steer loader

    Cat 226

    Full specsPDF

  3. Add a model

At a glance

Bold is the machine ahead on each figure, with its lead.

FigureBobcat S570Cat 226
Operating weight2,900 kg2,653 kg
Gross powerHigher is better45.5 kW50.1 kW+10%
Max torqueHigher is better201 Nm208 Nm+3%
Dump height with standard bucketHigher is better2.319 m+12%2.077 m
Operating heightHigher is better3.901 m+7%3.652 m
Rated operating capacityHigher is better944 kg+34%705 kg
Pump flowHigher is better65 L/min69 L/min+7%
Fuel tankHigher is better93.7 L+64%57 L
Top speedHigher is better11.8 km/h12.3 km/h+4%
Turning radius with standard bucketLower is better2.024 m1.977 m+2%
Width over tyresLower is better1.643 m1.497 m+9%
Height with operator cabLower is better1.97 m+3%2.028 m
Length with standard bucket3.378 m3.234 m

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Dimensions

Operating height3.901 m3.652 mmaximum overall height
Height with operator cab1.97 m2.028 mheight to top of cab
Angle of departure24°28°
Ground clearance0.185 m0.175 m
Wheelbase1.082 m1.054 m
Length without attachment2.657 m2.524 mwithout bucket
Length with standard bucket3.378 m3.234 mbucket on ground
Rollback at ground position30°Not published
Dump height with standard bucket2.319 m2.077 mclearance at maximum lift and dump
Height to bucket hinge pin3.023 m2.818 mat maximum lift
Dump reach at maximum height0.828 m0.533 mreach at maximum lift and dump
Dump angle at maximum height42°47°maximum dump angle
Rollback fully raised at maximum height97°89°rack back angle at maximum height
Width with standard bucket1.727 mNot published
Turning radius with standard bucket2.024 m1.977 mfrom centre to bucket
Tread width1.374 mstandard tyresNot published
Width over tyres1.643 mstandard tyres1.497 m
Bucket pin height at carry positionNot published0.215 m
Bumper overhang behind rear axleNot published0.894 m
Turning radius from centre, machine rearNot published1.513 m
Turning radius from centre, couplerNot published1.104 m
Maximum reach with arms parallel to groundNot published1.288 m
Bucket widthNot published1.576 m

Weight

Operating weight2,900 kgwith bucket, operator and full fuel tank2,653 kg
Shipping weight2,560 kgNot published

Performance

Rated operating capacity944 kgISO 14397-1705 kg
Tipping load1,888 kgISO 14397-11,410 kg
Lift breakout force17 kN1736 daNNot published
Tilt breakout force17 kN1670 daN1,781 kgftilt cylinder
Top speed11.8 km/hstandard12.3 km/hone speed, forward or reverse
Top speed (two-speed option)17.3 km/hhigh range17.8 km/hforward or reverse
Lift arm pathVerticalNot published
Rated operating capacity with optional counterweightNot published750 kg

Engine

Engine modelKubota V2607-DI-TE3B-BC-ICat C2.2 CRDI
Cylinders4Not published
Displacement2.6 L2.2 L
Gross power45.5 kW (61.0 hp)at 2,700 rpm (ISO 14396)50.1 kW (67.1 hp)SAE J1995
Max torque201 Nmat 1,425 rpm (SAE J1995 gross)208 Nmat 1,500 rpm (SAE J1995)
EmissionsInterim Tier 4 (EPA)U.S. EPA Tier 4 Final / EU Stage V
BoreNot published84 mm
StrokeNot published100 mm
Net powerNot published49.1 kW (65.8 hp)SAE 1349

Hydraulics

Pump flow65 L/minstandard flow69 L/minstandard flow, loader hydraulic flow
Pump flow (high flow)101 L/minhigh-flow option99 L/min
Max pressure23.8-24.5 MPasystem relief at quick couplers23 000 kPaloader hydraulic pressure, standard flow
Hydraulic powerNot published26.5 kW (35.5 hp)standard flow, calculated
Max pressure (high flow)Not published23 000 kPahigh-flow option
Hydraulic power (high flow)Not published38 kW (50.9 hp)high-flow option, calculated

Service capacities

Fuel tank93.7 L57 L
Engine oil, with filterNot published10 L
Hydraulic tankNot published34 L
Hydraulic system, with tankNot published45 L
Cooling systemNot published12 L
Chain box, each sideNot published7 L

Service intervals

Engine oil and filter250 hours500 hours
Fuel filters250 hours500 hours
Hydraulic charge filter500 hourswith reservoir breather capNot published
Hydraulic/hydrostatic filter1,000 hoursNot published
Hydraulic oil1,000 hours3,000 hours
Chaincase oil1,000 hoursNot published
Coolantevery 24 monthsNot published
Air filter, primary and secondaryNot published500 hours
Hydraulic oil filterNot published1,000 hours
Drive chain oilNot published1,000 hours

Tyres

TyresNot publishedCat 10 × 16.5

Cab

ROPSNot publishedISO 3471:2008
FOPSNot publishedISO 3449:2005 Level I
Sound level, inside cabNot published83 dB(A)ISO 6396:2008
Sound level, outside cabNot published102 dB(A)2000/14/EC

Sources: Bobcat MEA brochure S450-S650 B4501693-EN (01-22) - specifications and dimension drawing · Cat 226D3 Skid Steer Loader spec sheet AEHQ8205-03 (07-2026), Am North / EU / APD / ANZP

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

0 m1 m2 m3 m
Bobcat S570Cat 226Same scale, front edges and ground lined up.

Bobcat S570 vs Cat 226: questions

Which is bigger, the Bobcat S570 or Cat 226?

By operating weight the Bobcat S570 is the biggest at 2.9 t, then the Cat 226 at 2.65 t.

Which has more power, the Bobcat S570 or Cat 226?

The Cat 226: Bobcat S570 45.5 kW (61.0 hp), Cat 226 50.1 kW (67.1 hp) (gross power), a 10% difference.

Which lifts or carries more, the Bobcat S570 or Cat 226?

The Bobcat S570: Bobcat S570 944 kg, Cat 226 705 kg (rated operating capacity), a 34% difference.

Which has the bigger fuel tank, the Bobcat S570 or Cat 226?

The Bobcat S570: Bobcat S570 93.7 L, Cat 226 57 L (fuel tank), a 64% difference.

Which turns tighter, the Bobcat S570 or Cat 226?

The Cat 226: Bobcat S570 2.024 m, Cat 226 1.977 m (turning radius with standard bucket), a 2% difference.

Which is narrower to transport, the Bobcat S570 or Cat 226?

The Cat 226: Bobcat S570 1.643 m, Cat 226 1.497 m (width over tyres), a 9% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.

More comparisons

EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.