EF Logo

Bobcat S185 vs Bobcat S570

The Bobcat S570 is the heavier machine, at 2.9 t against 2.82 t, and the Bobcat S570 has more power (45.5 kW against 43.3 kW).

The Bobcat S185 is ahead on: turns tighter, lower to transport. The Bobcat S570 is ahead on: more torque, dumps higher, reaches higher, lifts or carries more, more hydraulic flow, bigger fuel tank, narrower to transport.

Below, every figure both makers publish sits side by side, with the Bobcat S185 and the Bobcat S570 drawn to the same scale from their dimension drawings.

  1. Bobcat · skid steer loader

    Bobcat S185

    Full specsPDF

  2. Bobcat · skid steer loader

    Bobcat S570

    Full specsPDF

  3. Add a model

At a glance

Bold is the machine ahead on each figure, with its lead.

FigureBobcat S185Bobcat S570
Operating weight2,821 kg2,900 kg
Max torqueHigher is better201 Nm201 Nm
Dump height with standard bucketHigher is better2.31 m2.319 m
Operating heightHigher is better3.863 m3.901 m+1%
Rated operating capacityHigher is better839 kg944 kg+13%
Pump flowHigher is better64 L/min65 L/min+1%
Fuel tankHigher is better90.8 L93.7 L+3%
Turning radius with standard bucketLower is better2.001 m+1%2.024 m
Width over tyresLower is better1.676 m1.643 m+2%
Height with operator cabLower is better1.938 m+2%1.97 m
Length with standard bucket3.309 m3.378 m

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Dimensions

Operating height3.863 m3.901 m
Height with operator cab1.938 m1.97 m
Angle of departure23°24°
Ground clearance0.191 m0.185 m
Wheelbase1.03 m1.082 m
Length without attachment2.586 m2.657 m
Length with standard bucket3.309 m3.378 m
Rollback at carry position27°Not published
Dump height with standard bucket2.31 m2.319 m
Dump reach at maximum height0.752 m0.828 m
Height to bucket hinge pin3.002 m3.023 m
Dump angle at maximum height42°42°
Rollback fully raised at maximum height95°97°
Bucket width1.575 m62-inch bucketNot published
Turning radius with standard bucket2.001 m2.024 m
Rear clearance of machine1.579 mNot published
Tread width1.433 m10-16.5 tyres1.374 mstandard tyres
Width over tyres1.676 m10-16.5 tyres1.643 mstandard tyres
Rollback at ground positionNot published30°
Width with standard bucketNot published1.727 m

Weight

Operating weight2,821 kg2,900 kgwith bucket, operator and full fuel tank
Shipping weightNot published2,560 kg

Performance

Rated operating capacity839 kgSAE J732; 885 kg with counterweight option944 kgISO 14397-1
Tipping load1,849 kg1,888 kgISO 14397-1
Lift breakout force1,588 kgf17 kN1736 daN
Tilt breakout force1,554 kgf17 kN1670 daN
Push force1,905 kgfNot published
Top speed11.8 km/h11.8 km/hstandard
Top speed (two-speed option)Not published17.3 km/hhigh range
Lift arm pathNot publishedVertical

Engine

Engine modelKubota V2607-DI-TE3B-BC-2Kubota V2607-DI-TE3B-BC-I
Cylinders44
Displacement2.6 L2.6 L
Gross power45.5 kW (61 hp)at 2,700 rpm (SAE)45.5 kW (61.0 hp)at 2,700 rpm (ISO 14396)
Net power43.3 kW (58 hp)at 2,700 rpm (SAE)Not published
Max torque201 Nmat 1,425 rpm (SAE gross)201 Nmat 1,425 rpm (SAE J1995 gross)
EmissionsNot publishedInterim Tier 4 (EPA)

Hydraulics

Pump flow64 L/minstandard, at 3,135 rpm, gear pump65 L/minstandard flow
Pump flow (high flow)100 L/minhigh-flow option, at 3,135 rpm101 L/minhigh-flow option
Max pressure23.1 MPasystem relief at quick couplers23.8-24.5 MPasystem relief at quick couplers

Service capacities

Fuel tank90.8 L93.7 L
Engine oil, with filter9 LNot published
Hydraulic tank18.2 Lhydraulic/hydrostatic reservoirNot published
Hydraulic system, with tank32.2 LNot published
Cooling system10.4 Lwithout heaterNot published
Chaincase34.1 Ltransmission (final drive)Not published

Service intervals

Engine oil and filter250 hours250 hours
Fuel filters250 hours250 hours
Hydraulic/hydrostatic filter500 hours1,000 hours
Hydraulic oil1,000 hours1,000 hours
Chaincase oil1,000 hours1,000 hours
Case drain filters1,000 hoursNot published
Coolantevery 2 yearsevery 24 months
Hydraulic charge filterNot published500 hourswith reservoir breather cap

Sources: Bobcat S185 Skid-Steer Loader Specifications, 6 October 2007 (North America), archive copy - dimension drawing and letters · Bobcat MEA brochure S450-S650 B4501693-EN (01-22) - specifications and dimension drawing

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

0 m1 m2 m3 m
Bobcat S185Bobcat S570Same scale, front edges and ground lined up.

Bobcat S185 vs Bobcat S570: questions

Which is bigger, the Bobcat S185 or Bobcat S570?

By operating weight the Bobcat S570 is the biggest at 2.9 t, then the Bobcat S185 at 2.82 t.

Which lifts or carries more, the Bobcat S185 or Bobcat S570?

The Bobcat S570: Bobcat S185 839 kg, Bobcat S570 944 kg (rated operating capacity), a 13% difference.

Which has the bigger fuel tank, the Bobcat S185 or Bobcat S570?

The Bobcat S570: Bobcat S185 90.8 L, Bobcat S570 93.7 L (fuel tank), a 3% difference.

Which turns tighter, the Bobcat S185 or Bobcat S570?

The Bobcat S185: Bobcat S185 2.001 m, Bobcat S570 2.024 m (turning radius with standard bucket), a 1% difference.

Which is narrower to transport, the Bobcat S185 or Bobcat S570?

The Bobcat S570: Bobcat S185 1.676 m, Bobcat S570 1.643 m (width over tyres), a 2% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.

More comparisons

EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.