Specification sheetIssued 4 November 2026
Bobcat · skid steer loader
Bobcat S185
Bobcat (North America) S185 spec sheet dated 6 October 2007 (Kubota V2607-DI-TE3B engine, 10-16.5 tyres); the S185 is a discontinued model not on Bobcat's Middle East site, so no Gulf sheet exists.
USAGlobal
- Rated operating capacity
- 839 kg
- power
- 43.3 kW (58 hp)
- Operating weight
- 2,821 kg
- Operating height
- 3.863 m
- Height with operator cab
- 1.938 m
- Angle of departure
- 23°
- Ground clearance
- 0.191 m
- Wheelbase
- 1.03 m
- Length without attachment
- 2.586 m
- Length with standard bucket
- 3.309 m
- Rollback at carry position
- 27°
- Dump height with standard bucket
- 2.31 m
- Dump reach at maximum height
- 0.752 m
- Height to bucket hinge pin
- 3.002 m
- Dump angle at maximum height
- 42°
- Rollback fully raised at maximum height
- 95°
- Bucket width
- 1.575 m
- Turning radius with standard bucket
- 2.001 m
- Track width (tread)
- 1.433 m
- Width over tyres
- 1.676 m
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
Dimensions
- Bucket width (68-inch bucket)
- 1.727 m
- Bucket width (74-inch bucket)
- 1.88 m
- Rear clearance of machine
- 1.579 m
Weight
- Operating weight
- 2,821 kg
Performance
- Rated operating capacity (SAE J732; 885 kg with counterweight option)
- 839 kg
- Tipping load
- 1,849 kg
- Lift breakout force
- 1,588 kgf
- Tilt breakout force
- 1,554 kgf
- Push force
- 1,905 kgf
- Top speed
- 11.8 km/h
Engine
- Engine model
- Kubota V2607-DI-TE3B-BC-2
- Cylinders
- 4
- Displacement
- 2.6 L
- Gross power (at 2,700 rpm (SAE))
- 45.5 kW (61 hp)
- Net power (at 2,700 rpm (SAE))
- 43.3 kW (58 hp)
- Max torque (at 1,425 rpm (SAE gross))
- 201 Nm
Hydraulics
- Pump flow (standard, at 3,135 rpm, gear pump)
- 64 L/min
- Pump flow (high flow) (high-flow option, at 3,135 rpm)
- 100 L/min
- Max pressure (system relief at quick couplers)
- 23.1 MPa
Service capacities
- Fuel tank
- 90.8 L
- Engine oil, with filter
- 9 L
- Hydraulic tank (hydraulic/hydrostatic reservoir)
- 18.2 L
- Hydraulic system, with tank
- 32.2 L
- Cooling system (without heater)
- 10.4 L
- Chaincase (transmission (final drive))
- 34.1 L
Service intervals
- Engine oil and filter
- 250 hours
- Fuel filter
- 250 hours
- Hydraulic/hydrostatic filter
- 500 hours
- Hydraulic oil
- 1,000 hours
- Chaincase oil
- 1,000 hours
- Case drain filters
- 1,000 hours
- Coolant
- every 2 years