Specification sheetIssued 4 November 2026
Bobcat · skid steer loader
Bobcat S185
Bobcat (North America) S185 spec sheet dated 6 October 2007 (Kubota V2607-DI-TE3B engine, 10-16.5 tyres); the S185 is a discontinued model not on Bobcat's Middle East site, so no Gulf sheet exists.
USAGlobal
- Rated operating capacity
- 1850 lb
- power
- 58 hp
- Operating weight
- 6220 lb
- Operating height
- 152.1 in
- Height with operator cab
- 76.3 in
- Angle of departure
- 23°
- Ground clearance
- 7.5 in
- Wheelbase
- 40.6 in
- Length without attachment
- 101.8 in
- Length with standard bucket
- 130.3 in
- Rollback at carry position
- 27°
- Dump height with standard bucket
- 91.0 in
- Dump reach at maximum height
- 29.6 in
- Height to bucket hinge pin
- 118.2 in
- Dump angle at maximum height
- 42°
- Rollback fully raised at maximum height
- 95°
- Bucket width
- 62.0 in
- Turning radius with standard bucket
- 78.8 in
- Track width (tread)
- 56.4 in
- Width over tyres
- 66.0 in
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
Dimensions
- Bucket width (68-inch bucket)
- 68.0 in
- Bucket width (74-inch bucket)
- 74.0 in
- Rear clearance of machine
- 62.2 in
Weight
- Operating weight
- 6220 lb
Performance
- Rated operating capacity (SAE J732; 885 kg with counterweight option)
- 1850 lb
- Tipping load
- 4076 lb
- Lift breakout force
- 3500 lb
- Tilt breakout force
- 3425 lb
- Push force
- 4200 lb
- Top speed
- 7.3 mph
Engine
- Engine model
- Kubota V2607-DI-TE3B-BC-2
- Cylinders
- 4
- Displacement
- 158.7 cu in
- Gross power (at 2,700 rpm (SAE))
- 61 hp
- Net power (at 2,700 rpm (SAE))
- 58 hp
- Max torque (at 1,425 rpm (SAE gross))
- 148.0 lb-ft
Hydraulics
- Pump flow (standard, at 3,135 rpm, gear pump)
- 16.9 gpm
- Pump flow (high flow) (high-flow option, at 3,135 rpm)
- 26.4 gpm
- Max pressure (system relief at quick couplers)
- 23.1 MPa
Service capacities
- Fuel tank
- 24 gal
- Engine oil, with filter
- 9.5 qt
- Hydraulic tank (hydraulic/hydrostatic reservoir)
- 4.8 gal
- Hydraulic system, with tank
- 8.5 gal
- Cooling system (without heater)
- 11 qt
- Chaincase (transmission (final drive))
- 9 gal
Service intervals
- Engine oil and filter
- 250 hours
- Fuel filter
- 250 hours
- Hydraulic/hydrostatic filter
- 500 hours
- Hydraulic oil
- 1,000 hours
- Chaincase oil
- 1,000 hours
- Case drain filters
- 1,000 hours
- Coolant
- every 2 years