EF Logo

Bobcat E26 vs John Deere 35 P-Tier

The John Deere 35 P-Tier is the heavier machine, at 3.52 t against 2.61 t, and the John Deere 35 P-Tier has more power (17.4 kW against 14.9 kW).

The Bobcat E26 is ahead on: turns tighter, lower to transport. The John Deere 35 P-Tier is ahead on: digs deeper, reaches further, dumps higher, more digging or pushing force, bigger fuel tank.

Below, every figure both makers publish sits side by side, with the Bobcat E26 and the John Deere 35 P-Tier drawn to the same scale from their dimension drawings.

  1. Bobcat · mini excavator

    Bobcat E26

    Full specsPDF

  2. John Deere · mini excavator

    John Deere 35 P-Tier

    Full specsPDF

  3. Add a model

At a glance

Bold is the machine ahead on each figure, with its lead.

FigureBobcat E26John Deere 35 P-Tier
Operating weight2,608 kg3,520 kg
Max digging depthHigher is better2.568 m3.06 m+19%
Max digging reachHigher is better4.542 m5.21 m+15%
Max dumping heightHigher is better2.845 m3.46 m+22%
Bucket digging forceHigher is better24 kN27 kN+14%
Fuel tankHigher is better34.4 L42 L+22%
Tail swing radiusLower is better0.82 m+6%0.87 m
Overall height (to top of cab)Lower is better2.438 m+2%2.48 m
Overall length4.174 m4.64 m

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Dimensions

Overall length4.174 mOverall length in travel position4.64 m
Track length1.965 mOverall length of track assembly2.11 mundercarriage length
Track length on ground1.543 m1.66 msprocket centre to idler centre
Swing centre to blade1.462 mMachine centre line to bladeNot published
Swing centre to front (transport)3.192 mMinimum radius in travel positionNot published
Overall height (to top of cab)2.438 mHeight2.48 mcanopy and cab
Engine cover height1.54 mGround line to top of engine cover1.53 mengine cover height
Ground clearance, counterweight0.539 m0.55 m
Blade height0.319 m0.373 m
Track lug height0.021 mNot published
Blade width1.5 mStandard 1500 mm dozer blade1.74 m
Shoe width0.25 mRubber track width0.3 mrubber track
Tail swing radius0.82 mSwing clearance, rear (plan view)0.87 m
Tail swing radius, medium counterweight0.84 mP* in the tableNot published
Upperstructure widthNot published1.55 m
Width of crawlerNot published1.74 mundercarriage width
Ground clearance (minimum)Not published0.28 m

Performance

Max digging reach4.542 m5.21 m
Max reach at ground level4.413 mWorking range CNot published
Max digging depth2.568 mWorking range K3.06 m
Max vertical wall digging depth1.474 mWorking range JNot published
Max digging height4.006 mWorking range H, maximum bucket tooth height4.87 m
Max dumping height2.845 mWorking range I3.46 m
Max height of working equipment, dipperstick retracted3.104 mWorking range GNot published
Max working equipment radius, boom at max height, dipperstick retracted2.052 mWorking range DNot published
Max blade height0.385 mWorking range E, above ground0.36 m
Max blade depth0.42 mWorking range F, below ground0.4 m
Bucket rotation185°Working range A, bucket pivot angleNot published
Min front swing radius1.755 mPlan view O, minimum turning radius2.08 m
Boom swing offset, left0.58 mNot published
Boom swing offset, right0.705 mPlan view N, right-hand rotationNot published
Working width at max left-hand rotation1.616 mPlan view RNot published
Working width at max right-hand rotation1.741 mPlan view QNot published
Boom swing, left60°Not published
Boom swing, right60°Not published
Bucket digging force24 kN27 kNISO
Arm digging force16 kN19 kN
Swing speed9.3 rpmSlew rate9.0 rpm
Max drawbar pull29 kNNot published
Travel speed (high)4.3 km/h4.3 km/h
Travel speed (low)2.5 km/h2.8 km/h
Bucket capacityNot published0.11 m³
Boom swingNot published72 deg. left / 62 deg. right (canopy); 62 / 62 deg. (cab)independent swing boom

Weight

Operating weight2,608 kgWith cab and bucket, ISO 60163,520 kg
Transport mass2,477 kgNo attachmentNot published
Weight reduction with canopy-118 kgNot published
Ground pressure30.3 kPaRubber tracks32.0 kPa (4.6 psi) canopy / 33.0 kPa (4.8 psi) cab, standard arm and counterweight, rubber track
Operating weight (cab)Not published3,690 kg
Operating weight (long arm, canopy)Not published3,783 kg
Operating weight (long arm, cab)Not published3,953 kg
CounterweightNot published540 kgstandard
Additional counterweightNot published240 kgfitted with the long arm
Optional angle bladeNot published296 kgadded weight

Engine

Engine modelYanmar 3TNV76-PBCYanmar 3TNV88F
EmissionsEU Stage VEPA Final Tier 4 / EU Stage IV
Cylinders3Not published
Displacement1.1 L1.6 L
Gross power14.9 kW (20 hp)Maximum power at 2,400 rpm, ISO 14396Not published
Max torque66 NmAt 1,800 rpm, SAE J1995Not published
Engine oil, with filter3.6 L7.2 L
Cooling system4.3 LWith heater (3.9 L without)5 L
Net powerNot published17.4 kW (23.3 hp)ISO 9249, at 2,400 rpm

Hydraulics

Pump flow94 L/min2 x 38.4 L/min (piston) + 22.8 L/min (gear)
Auxiliary circuit flow, primary54 L/minRelief 180 barNot published
Auxiliary circuit flow, secondary20 L/minRelief 179 barNot published
Hydraulic systemNot publishedOpen centre, 2 variable-displacement piston pumps and 1 fixed gear pump
Auxiliary flowNot published61 L/min

Service capacities

Fuel tank34.4 L42 L
Hydraulic tank10.2 LHydraulic reservoir32 L
Hydraulic system, with tank23 LSystem capacityNot published

Service intervals

Engine oil and filter250 hoursor 12 months; first change at 50 hNot published
Fuel filters250 hoursNot published
Hydraulic oil500 hoursNot published
Hydraulic filter500 hoursand case drain filter; first change at 50 hNot published
Final drive oil, first change50 hoursthen check the level every 250 hNot published
Swing bearing grease50 hoursevery 10 h when working in waterNot published
Pivot points grease10 hoursNot published
Engine valve clearance1,000 hoursor 12 monthsNot published

Front attachment

Boom lengthNot published2.465 m
Stick lengthNot published1.315 mstandard arm
Stick length, long stickNot published1.715 m

Sources: Bobcat E26, E27z, E27 brochure B4501724-EN (09-24, EU English) - specifications and lettered dimensions · John Deere 35 P-Tier Compact Excavator brochure ME35PAU (23-07)

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

0 m1 m2 m3 m4 m
Bobcat E26John Deere 35 P-TierSame scale, front edges and ground lined up.

Bobcat E26 vs John Deere 35 P-Tier: questions

Which is bigger, the Bobcat E26 or John Deere 35 P-Tier?

By operating weight the John Deere 35 P-Tier is the biggest at 3.52 t, then the Bobcat E26 at 2.61 t.

Which digs deeper, the Bobcat E26 or John Deere 35 P-Tier?

The John Deere 35 P-Tier: Bobcat E26 2.568 m, John Deere 35 P-Tier 3.06 m (max digging depth), a 19% difference.

Which reaches further, the Bobcat E26 or John Deere 35 P-Tier?

The John Deere 35 P-Tier: Bobcat E26 4.542 m, John Deere 35 P-Tier 5.21 m (max digging reach), a 15% difference.

Which has the bigger fuel tank, the Bobcat E26 or John Deere 35 P-Tier?

The John Deere 35 P-Tier: Bobcat E26 34.4 L, John Deere 35 P-Tier 42 L (fuel tank), a 22% difference.

Which turns tighter, the Bobcat E26 or John Deere 35 P-Tier?

The Bobcat E26: Bobcat E26 0.82 m, John Deere 35 P-Tier 0.87 m (tail swing radius), a 6% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.

More comparisons

EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.