John Deere 410 P-Tier specs
- dig depth
- 4.85 m
- net power
- 75 kW (101 hp)
- operating weight
- 7,929 kg
- shovel capacity
- 1.15 m³
John Deere 410 P-Tier dimensions
| Letter | Dimension | Metric and imperial |
|---|---|---|
| A | Ground clearance (minimum) | 0.334 m13 in. |
| B | Total travel length | 7.43 m24 ft. 5 in. |
| C | Width over tyres | 2.34 m7 ft. 8 in. |
| D | Cab roof height | 2.87 m9 ft. 5 in. |
| E | Wheelbase | 2.19 m7 ft. 2 in. |
| O | Total travel height | 3.91 m12 ft. 10 in. |
John Deere 410 P-Tier specifications
John Deere 410 P-Tier backhoe loader from brochure MB410PAU (23-03), which covers both the EPA Final Tier 4/EU Stage IV and the EPA Tier 2/EU Stage II builds; the Tier 2 build (the one sold where Tier 4 is not required, such as the Gulf) is used for engine and weight rows, with FT4 figures in the notes. Deere publishes no separate Middle-East sheet.
43 figures in 9 groups
Dimensions
- Turning radius, MFWD, without brakes
- 4.02 mCurb-turning radius; with brakes 3.53 m
- Bucket clearance circle, MFWD, without brakes
- 10.93 mWith brakes 10.20 m
- Shovel width (GP shovel)
- 2.394 m
Stabilisers
- Rear frame width
- 2.35 mStabilizer width, transport
- Stabiliser spread, operating
- 3.45 m
- Stabiliser overall width, operating
- 4.03 m
Backhoe performance
- Max load-over height
- 3.97 m
- Reach at ground level, from slew centre
- 6.02 m
- Reach at ground level, from slew centre (extendable dipperstick extended)
- 7.14 m
- Reach from rear axle centreline
- 7.14 mStandard backhoe
- Max dig depth
- 4.85 mSAE maximum, standard backhoe
- Max dig depth (extendable dipperstick extended)
- 6 mSAE maximum
- Digging depth, 610 mm flat bottom
- 4.8 mSAE, standard backhoe
- Digging depth, 2440 mm flat bottom
- 4.49 mSAE, standard backhoe
- Bucket rotation
- 190°
- Swing arc
- 180°
- Bucket tearout force
- 70 kN
- Dipper tearout force
- 44 kN
Loader performance
- Dump angle at full height
- 45°Bucket dump angle, maximum
- Maximum bucket rollback at ground level
- 40°
- Maximum hinge pin height
- 3.47 mHeight to bucket hinge pin, maximum
- Dump height
- 2.66 m
- Dump reach at full height
- 0.772 mBucket at 45°, 1.15 m³ heavy-duty bucket
- Loader digging depth
- 0.135 m
- Reach from front axle centreline, bucket on ground
- 2.09 m
- Shovel capacity
- 1.15 m³
- Shovel breakout force
- 46 kN
- Lift capacity to full height
- 3,160 kg
Weight
- Operating weight
- 7,929 kg
- Operating weight (typical, cab and extendable dipperstick)
- 8,689 kg
Engine
- Engine model
- John Deere PowerTech 4.5L turbocharged
- Emissions
- EPA Tier 2 / EU Stage II
- Displacement
- 4.5 L
- Gross power
- 76 kW (102 hp)
- Net power
- 75 kW (101 hp)
- Max torque
- 387 Nm
Transmission
- Transmission
- 5-speed full PowerShift with hydraulic reverser; AutoShift standard
- Top speed
- 40 km/hGear 5 forward, 21L-24 rear tyres
Hydraulics
- Hydraulic system
- Pressure-compensated load-sensing (PCLS) axial-piston pump
- Pump flow
- 163 L/minAt 2,200 rpm, backhoe and loader
- Max pressure
- 250 bar
Tyres
- Front tyres
- 12.5/80-18
- Rear tyres
- 21L-24
Source: John Deere 410 P-Tier Backhoe Loader brochure MB410PAU (23-03)
John Deere 410 P-Tier service
What each system holds and when John Deere says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.
Loading the 3D machine...
Drag to turn · scroll to zoom · built from the maker's drawing; markers show where each system is
- Engine oil, with filter
- 13 L
- Engine oil and filter, change every
- 500 hours
Fluid: John Deere Plus-50 II engine oil (John Deere 410 P Backhoe Loader replacement parts guide (oil and capacities, service intervals))
Deere gives the viscosity by temperature in the operator's manual.
The 500-hour change assumes clean work; Deere halves it to 250 hours in difficult conditions, which dusty, hot sites usually are.
Confirm fluid grades in your machine's operator's manual: they vary by build year and climate.
Service capacities
- Fuel tank
- 128.7 L34.0 gal.
- Cooling system
- 27.5 L29.1 qt.
- Hydraulic system, with tank
- 126.8 L33.5 gal.
- Hydraulic tank
- 45 L11.9 gal.
- Engine oil, with filter
- 13 L13.7 qt.
- Torque converter and transmission
- 15.1 L16.0 qt.
- Rear axle
- 18 L19.0 qt.
- Diesel exhaust fluid (DEF)
- 13.7 L3.6 gal.
- MFWD front axle housing
- 6.5 L1.7 US gal
- MFWD planetary housing (each)
- 0.9 L0.2 US gal
Service intervals
- Engine oil and filter
- 500 hours
- Fuel filters
- 500 hours
- Transmission oil
- 1,000 hours
- Transmission filter
- 1,000 hours
- Hydraulic filter
- 1,000 hours
- Hydraulic oil
- 2,000 hours
- Axle oil
- 2,000 hours
- Coolant
- 6,000 hours
Compare the John Deere 410 P-Tier
The machines nearest in size, each drawn beside this one at the same scale.
Moving a John Deere 410 P-Tier
A first look from the sheet. Your haulier or forwarder confirms the load.
- Length
- 7.43m
- Width
- 2.34m
- Height
- 3.91m
- Weight
- 7.9t
- RoadA beavertail or flatbed truck
- SeaA 40 ft flat rack, out of gauge (over-height): expect a surcharge
John Deere 410 P-Tier prices and listings in the UAE
Asking prices on EquipmentsFinder, in AED, refreshed daily.
Typical hire, per daymedian of 9
AED 750 /day
No priced John Deere 410 P-Tier for hire yet: this is all backhoe loaders
No John Deere 410 P-Tier for rent listed right now.
Request a John Deere 410 P-TierAbout the John Deere 410 P-Tier
The John Deere 410 P-Tier is a 7.93-tonne backhoe loader with a John Deere PowerTech 4.5L turbocharged engine rated at 75 kW (101 hp).
It digs to 4.85 m with the backhoe, carries 1.15 m³ in the front shovel, dumps at 2.66 m and travels at up to 40 km/h between sites.
For transport it measures 7.43 m long and 2.34 m wide, and its tank holds 128.7 L of fuel.
A backhoe loader: a loader bucket at the front and a digging arm at the back, on one wheeled machine that drives between sites.
Typical jobs: trenching for pipes and cables, loading trucks and moving material, site clearing and levelling, road and utility repair.
John Deere 410 P-Tier questions
How much does a John Deere 410 P-Tier weigh?
7,929 kg (17,480 lb.) in working order, with fuel, operator and standard attachment.
What engine and horsepower does the John Deere 410 P-Tier have?
A John Deere PowerTech 4.5L turbocharged engine rated at 75 kW (101 hp) net.
How deep can a John Deere 410 P-Tier dig?
Up to 4.85 m (15 ft. 11 in.) with the backhoe.
How much does the John Deere 410 P-Tier's front shovel hold?
1.15 m³ (1.50 cu. yd.).
What are the John Deere 410 P-Tier's dimensions?
7.43 m long, 2.34 m wide and 3.91 m high, from John Deere's dimension drawing.
How do you transport a John Deere 410 P-Tier?
Road: a beavertail or flatbed truck. Sea: a 40 ft flat rack, out of gauge (over-height): expect a surcharge.
What is the John Deere 410 P-Tier's fuel tank capacity?
128.7 L (34.0 gal.).
How much oil does a John Deere 410 P-Tier take?
Engine oil: 13 L (13.7 qt.). Hydraulic oil: Pressure-compensated load-sensing (PCLS) axial-piston pump.
How often does a John Deere 410 P-Tier need an oil change?
John Deere sets the engine oil and filter at every 500 hours; in hot, dusty work, check the operator's manual for a shorter interval.
What are the John Deere 410 P-Tier's main competitors?
The machines nearest it in size are the Cat 420, the JCB 3CX, the Case 580SN. Each has a side-by-side comparison on EquipmentsFinder.
Is the John Deere 410 P-Tier sold in the UAE?
Not new through a Gulf dealer: it is sold in the USA and other markets worldwide. Used and imported machines do come up on EquipmentsFinder.
What is a John Deere 410 P-Tier used for?
A backhoe loader: a loader bucket at the front and a digging arm at the back, on one wheeled machine that drives between sites. Typical jobs: trenching for pipes and cables, loading trucks and moving material, site clearing and levelling, road and utility repair.
Need a John Deere 410 P-Tier on site?
Post the job - where, when and for how long. Suppliers with a machine contact you directly. Free to post.
