EF Logo

Cat 420 vs John Deere 410 P-Tier

The John Deere 410 P-Tier is the heavier machine, at 7.93 t against 7.83 t, and the John Deere 410 P-Tier has more power (75 kW against 68 kW).

The Cat 420 is ahead on: more torque, dumps higher, reaches higher, more digging or pushing force, more hydraulic flow, bigger fuel tank, faster, lower to transport. The John Deere 410 P-Tier is ahead on: more power, digs deeper, reaches further, bigger bucket or body.

Below, every figure both makers publish sits side by side, with the Cat 420 and the John Deere 410 P-Tier drawn to the same scale from their dimension drawings.

  1. Cat · backhoe loader

    Cat 420

    Full specsPDF

  2. John Deere · backhoe loader

    John Deere 410 P-Tier

    Full specsPDF

  3. Add a model

At a glance

Bold is the machine ahead on each figure, with its lead.

FigureCat 420John Deere 410 P-Tier
Operating weight7,834 kg7,929 kg
Net powerHigher is better68 kW75 kW+10%
Max torqueHigher is better436 Nm+13%387 Nm
Max dig depthHigher is better4.278 m4.85 m+13%
Reach at ground level, from slew centreHigher is better5.6 m6.02 m+8%
Dump height with standard bucketHigher is better2.758 m+4%2.66 m
Maximum hinge pin heightHigher is better3.488 m+1%3.47 m
Shovel capacityHigher is better0.96 m³1.15 m³+20%
Shovel breakout forceHigher is better50 kN+8%46 kN
Pump flowHigher is better187 L/min+15%163 L/min
Fuel tankHigher is better160 L+24%128.7 L
Top speedHigher is better41 km/h+3%40 km/h
Cab roof heightLower is better2.815 m+2%2.87 m
Total travel length7.163 m7.43 m

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Dimensions

Total travel length7.163 m7.43 mOverall length, transport
Overall length (loader on ground)7.132 mNot published
Total travel height3.645 mOverall transport height, standard stick3.91 mTransport height
Cab roof height2.815 mHeight to top of cab/canopy2.87 mHeight to top of ROPS/cab
Height to top of exhaust stack2.72 mNot published
Rear axle centreline to front grille2.706 mNot published
Wheelbase2.2 m2.19 m
Overall width2.248 mNot published
Rear frame width2.322 m2.35 mStabilizer width, transport
Shovel width (GP shovel)2.262 m2.394 m
Height to loader hinge pin (transport)0.378 mNot published
Ground clearance (LH step)0.316 mNot published
Ground clearance (AWD guard)0.312 mNot published
Ground clearance (485 kg counterweight)0.289 mNot published
Front wheel tread gauge1.895 mNot published
Rear wheel tread gauge1.728 mNot published
Stabiliser spread, operating (centre)3.31 mNot published
Stabiliser spread, operating (outside)3.77 m4.03 m
Turning circle, outside front wheels8.205 mInner wheel not brakedNot published
Turning circle, outside widest loader bucket10.745 mInner wheel not brakedNot published
Ground clearance (minimum)Not published0.334 m
Width over tyresNot published2.34 m
Turning radius, MFWD, without brakesNot published4.02 mCurb-turning radius; with brakes 3.53 m
Bucket clearance circle, MFWD, without brakesNot published10.93 mWith brakes 10.20 m

Backhoe performance

Max dig depth4.278 mSAE maximum, standard stick4.85 mSAE maximum, standard backhoe
Max dig depth (E-stick extended)5.372 mSAE maximum, extendible stick extendedNot published
Digging depth, 2440 mm flat bottom3.9 m4.49 mSAE, standard backhoe
Digging depth, 610 mm flat bottom4.24 m4.8 mSAE, standard backhoe
Reach at ground level, from slew centre5.6 m6.02 m
Reach at ground level, from slew centre (E-stick extended)6.641 mNot published
Reach from rear axle centreline at ground line6.69 m7.14 mStandard backhoe
Max load-over height3.709 mLoading height, standard stick3.97 m
Loading reach1.845 mNot published
Maximum operating height (backhoe)5.598 mNot published
Bucket tearout force64 kN70 kN
Dipper tearout force44 kN44 kN
Swing arc180°180°
Bucket rotation205°190°
Reach at ground level, from slew centre (extendable dipperstick extended)Not published7.14 m
Max dig depth (extendable dipperstick extended)Not published6 mSAE maximum

Loader performance

Shovel capacity0.96 m³GP bucket, SAE rated, pin-on1.15 m³
Lift capacity to full height3,280 kg3,160 kg
Shovel breakout force50 kN46 kN
Lift breakout force50 kNNot published
Tipping load at breakout point6,663 kgNot published
Dump height with standard bucket2.758 m2.66 m
Maximum hinge pin height3.488 m3.47 mHeight to bucket hinge pin, maximum
Dump angle at full height44°45°Bucket dump angle, maximum
Dump reach at maximum angle0.807 mNot published
Maximum bucket rollback at ground level36°40°
Loader digging depth0.07 m0.135 m
Grille to bucket cutting edge, carry position1.48 mNot published
Maximum operating height (loader)4.356 mNot published
Dump reach at full heightNot published0.772 mBucket at 45°, 1.15 m³ heavy-duty bucket
Reach from front axle centreline, bucket on groundNot published2.09 m

Weight

Operating weight7,834 kg7,929 kg
Operating weight (maximum, ROPS capacity)11,000 kgNot published
Operating weight (minimum)7,384 kgNot published
Operating weight (typical, cab and extendable dipperstick)Not published8,689 kg

Engine

Engine modelCat C3.6, electronic turbo, intercooledJohn Deere PowerTech 4.5L turbocharged
EmissionsU.S. EPA Tier 4 Final / EU Stage VEPA Tier 2 / EU Stage II
Displacement3.6 L4.5 L
Bore98 mmNot published
Stroke120 mmNot published
Gross power76 kW (102 hp)76 kW (102 hp)
Gross power (ISO 14396)74 kW (100 hp)At 2,200 rpm; 74.5 kW (100 hp) engine ratingNot published
Net power68 kW (91 hp)75 kW (101 hp)
Net peak power78 kW (105 hp)Not published
Max torque436 Nm387 Nm
Gross power, 110 hp rating84 kW (112 hp)Not published
Net power, 110 hp rating76 kW (101 hp)Not published
Max torque, 110 hp rating485 NmNet, SAE J1349; 82 kW (110 hp) engine ratingNot published

Transmission

TransmissionPower shift 4F/3R (standard); 6F/3R power shift optional, with or without LTC5-speed full PowerShift with hydraulic reverser; AutoShift standard
Top speed41 km/h40 km/hGear 5 forward, 21L-24 rear tyres

Hydraulics

Hydraulic systemClosed center, load sensing; variable-flow axial piston pumpPressure-compensated load-sensing (PCLS) axial-piston pump
Pump flow187 L/minAt 2,200 rpm163 L/minAt 2,200 rpm, backhoe and loader
Max pressure250 bar250 bar

Tyres

Front tyres340/80-1812.5/80-18
Rear tyres500/70-2421L-24

Service capacities

Fuel tank160 L128.7 LGround-level fueling
Engine oil, with filter9 L13 L
Cooling system18 LWith air conditioning27.5 LCab (canopy 25.7 L)
Diesel exhaust fluid (DEF)19 L13.7 LFT4/Stage IV build only
Hydraulic system, with tank95 L126.8 L
Hydraulic tank42 L45 LHydraulic reservoir
Transmission, power shift (AWD)19 LNot published
Rear axle16 L18 L
Front axle (AWD)11 LNot published
Final drive, front (each)0.7 LNot published
Final drive, rear (each)1.7 LNot published
Torque converter and transmissionNot published15.1 L
MFWD front axle housingNot published6.5 L
MFWD planetary housing (each)Not published0.9 L

Service intervals

Engine oil and filter500 hoursor 12 months500 hours
Transmission oil1,000 hours1,000 hours
Axle oil1,000 hours2,000 hours
Hydraulic oil3,000 hoursWith Cat HYDO Advanced 102,000 hours
Coolant12,000 hoursCat ELC, or 72 months6,000 hours
Fuel filtersNot published500 hoursPrimary and final
Transmission filterNot published1,000 hours
Hydraulic filterNot published1,000 hours

Stabilisers

Stabiliser spread, operatingNot published3.45 m

Sources: Cat 420 Backhoe Loader specalog AEHQ8243-04 (2026) · John Deere 410 P-Tier Backhoe Loader brochure MB410PAU (23-03)

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

0 m1 m2 m3 m4 m5 m6 m7 m8 m
Cat 420John Deere 410 P-TierSame scale, front edges and ground lined up.

Cat 420 vs John Deere 410 P-Tier: questions

Which is bigger, the Cat 420 or John Deere 410 P-Tier?

By operating weight the John Deere 410 P-Tier is the biggest at 7.93 t, then the Cat 420 at 7.83 t.

Which has more power, the Cat 420 or John Deere 410 P-Tier?

The John Deere 410 P-Tier: Cat 420 68 kW (91 hp), John Deere 410 P-Tier 75 kW (101 hp) (net power), a 10% difference.

Which digs deeper, the Cat 420 or John Deere 410 P-Tier?

The John Deere 410 P-Tier: Cat 420 4.278 m, John Deere 410 P-Tier 4.85 m (max dig depth), a 13% difference.

Which reaches further, the Cat 420 or John Deere 410 P-Tier?

The John Deere 410 P-Tier: Cat 420 5.6 m, John Deere 410 P-Tier 6.02 m (reach at ground level, from slew centre), a 8% difference.

Which has the bigger bucket, the Cat 420 or John Deere 410 P-Tier?

The John Deere 410 P-Tier: Cat 420 0.96 m³, John Deere 410 P-Tier 1.15 m³ (shovel capacity), a 20% difference.

Which has the bigger fuel tank, the Cat 420 or John Deere 410 P-Tier?

The Cat 420: Cat 420 160 L, John Deere 410 P-Tier 128.7 L (fuel tank), a 24% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.

More comparisons

EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.