Specification sheetIssued 4 November 2026
John Deere · backhoe loader
John Deere 410 P-Tier
John Deere 410 P-Tier backhoe loader from brochure MB410PAU (23-03), which covers both the EPA Final Tier 4/EU Stage IV and the EPA Tier 2/EU Stage II builds; the Tier 2 build (the one sold where Tier 4 is not required, such as the Gulf) is used for engine and weight rows, with FT4 figures in the notes. Deere publishes no separate Middle-East sheet.
USAGlobal
- dig depth
- 4.85 m
- power
- 75 kW (101 hp)
- Operating weight
- 7,929 kg
- Shovel capacity
- 1.15 m³
- Ground clearance (minimum)
- 0.334 m
- Total travel length
- 7.43 m
- Width over tyres
- 2.34 m
- Cab roof height
- 2.87 m
- Wheelbase
- 2.19 m
- Total travel height
- 3.91 m
A
B
C
D
E
O
Dimensions
- Turning radius, MFWD, without brakes (Curb-turning radius; with brakes 3.53 m)
- 4.02 m
- Bucket clearance circle, MFWD, without brakes (With brakes 10.20 m)
- 10.93 m
- Shovel width (GP shovel)
- 2.394 m
Stabilisers
- KRear frame width (Stabilizer width, transport)
- 2.35 m
- LStabiliser spread, operating
- 3.45 m
- MStabiliser overall width, operating
- 4.03 m
Backhoe performance
- FMax load-over height
- 3.97 m
- GReach at ground level, from slew centre
- 6.02 m
- Reach at ground level, from slew centre (extendable dipperstick extended)
- 7.14 m
- HReach from rear axle centreline (Standard backhoe)
- 7.14 m
- IMax dig depth (SAE maximum, standard backhoe)
- 4.85 m
- Max dig depth (extendable dipperstick extended) (SAE maximum)
- 6 m
- JDigging depth, 610 mm flat bottom (SAE, standard backhoe)
- 4.8 m
- Digging depth, 2440 mm flat bottom (SAE, standard backhoe)
- 4.49 m
- NBucket rotation
- 190°
- Swing arc
- 180°
- Bucket tearout force
- 70 kN
- Dipper tearout force
- 44 kN
Loader performance
- PDump angle at full height (Bucket dump angle, maximum)
- 45°
- QMaximum bucket rollback at ground level
- 40°
- RMaximum hinge pin height (Height to bucket hinge pin, maximum)
- 3.47 m
- SDump height
- 2.66 m
- TDump reach at full height (Bucket at 45°, 1.15 m³ heavy-duty bucket)
- 0.772 m
- ULoader digging depth
- 0.135 m
- VReach from front axle centreline, bucket on ground
- 2.09 m
- Shovel capacity
- 1.15 m³
- Shovel breakout force
- 46 kN
- Lift capacity to full height
- 3,160 kg
Weight
- Operating weight
- 7,929 kg
- Operating weight (typical, cab and extendable dipperstick)
- 8,689 kg
Engine
- Engine model
- John Deere PowerTech 4.5L turbocharged
- Emissions
- EPA Tier 2 / EU Stage II
- Displacement
- 4.5 L
- Gross power
- 76 kW (102 hp)
- Net power
- 75 kW (101 hp)
- Max torque
- 387 Nm
Transmission
- Transmission
- 5-speed full PowerShift with hydraulic reverser; AutoShift standard
- Top speed (Gear 5 forward, 21L-24 rear tyres)
- 40 km/h
Hydraulics
- Hydraulic system
- Pressure-compensated load-sensing (PCLS) axial-piston pump
- Pump flow (At 2,200 rpm, backhoe and loader)
- 163 L/min
- Max pressure
- 250 bar
Tyres
- Front tyres
- 12.5/80-18
- Rear tyres
- 21L-24
Service capacities
- Fuel tank (Ground-level fueling)
- 128.7 L
- Cooling system (Cab (canopy 25.7 L))
- 27.5 L
- Hydraulic system, with tank
- 126.8 L
- Hydraulic tank (Hydraulic reservoir)
- 45 L
- Engine oil, with filter
- 13 L
- Torque converter and transmission
- 15.1 L
- Rear axle
- 18 L
- Diesel exhaust fluid (DEF) (FT4/Stage IV build only)
- 13.7 L
- MFWD front axle housing
- 6.5 L
- MFWD planetary housing (each)
- 0.9 L
Service intervals
- Engine oil and filter
- 500 hours
- Fuel filters (Primary and final)
- 500 hours
- Transmission oil
- 1,000 hours
- Transmission filter
- 1,000 hours
- Hydraulic filter
- 1,000 hours
- Hydraulic oil
- 2,000 hours
- Axle oil
- 2,000 hours
- Coolant
- 6,000 hours