John Deere 410 P-Tier

John Deere 410 P-Tier backhoe loader from brochure MB410PAU (23-03), which covers both the EPA Final Tier 4/EU Stage IV and the EPA Tier 2/EU Stage II builds; the Tier 2 build (the one sold where Tier 4 is not required, such as the Gulf) is used for engine and weight rows, with FT4 figures in the notes. Deere publishes no separate Middle-East sheet.

USAGlobal

dig depth: 15 ft. 11 in.
power: 101 hp
Operating weight: 17,480 lb.
Shovel capacity: 1.50 cu. yd.

Side

Front

Ground clearance (minimum): 13 in.
Total travel length: 24 ft. 5 in.
Width over tyres: 7 ft. 8 in.
Cab roof height: 9 ft. 5 in.
Wheelbase: 7 ft. 2 in.
Total travel height: 12 ft. 10 in.

Dimensions

Turning radius, MFWD, without brakes (Curb-turning radius; with brakes 3.53 m): 13 ft. 2 in.
Bucket clearance circle, MFWD, without brakes (With brakes 10.20 m): 35 ft. 10 in.
Shovel width (GP shovel): 94 in.

Stabilisers

KRear frame width (Stabilizer width, transport): 7 ft. 9 in.
LStabiliser spread, operating: 11 ft. 4 in.
MStabiliser overall width, operating: 13 ft. 3 in.

Backhoe performance

FMax load-over height: 13 ft. 0 in.
GReach at ground level, from slew centre: 19 ft. 9 in.
Reach at ground level, from slew centre (extendable dipperstick extended): 23 ft. 5 in.
HReach from rear axle centreline (Standard backhoe): 23 ft. 5 in.
IMax dig depth (SAE maximum, standard backhoe): 15 ft. 11 in.
Max dig depth (extendable dipperstick extended) (SAE maximum): 19 ft. 8 in.
JDigging depth, 610 mm flat bottom (SAE, standard backhoe): 15 ft. 9 in.
Digging depth, 2440 mm flat bottom (SAE, standard backhoe): 14 ft. 9 in.
NBucket rotation: 190°
Swing arc: 180°
Bucket tearout force: 15,723 lb.
Dipper tearout force: 9,907 lb.

Loader performance

PDump angle at full height (Bucket dump angle, maximum): 45°
QMaximum bucket rollback at ground level: 40°
RMaximum hinge pin height (Height to bucket hinge pin, maximum): 11 ft. 4 in.
SDump height: 8 ft. 9 in.
TDump reach at full height (Bucket at 45°, 1.15 m³ heavy-duty bucket): 30.4 in.
ULoader digging depth: 5.3 in.
VReach from front axle centreline, bucket on ground: 6 ft. 10 in.
Shovel capacity: 1.50 cu. yd.
Shovel breakout force: 10,361 lb.
Lift capacity to full height: 6,967 lb.

Weight

Operating weight: 17,480 lb.
Operating weight (typical, cab and extendable dipperstick): 19,156 lb.

Engine

Engine model: John Deere PowerTech 4.5L turbocharged
Emissions: EPA Tier 2 / EU Stage II
Displacement: 276 cu. in.
Gross power: 102 hp
Net power: 101 hp
Max torque: 285 lb.-ft.

Transmission

Transmission: 5-speed full PowerShift with hydraulic reverser; AutoShift standard
Top speed (Gear 5 forward, 21L-24 rear tyres): 24.9 mph

Hydraulics

Hydraulic system: Pressure-compensated load-sensing (PCLS) axial-piston pump
Pump flow (At 2,200 rpm, backhoe and loader): 43 gpm
Max pressure: 3,625 psi

Tyres

Front tyres: 12.5/80-18
Rear tyres: 21L-24

Service capacities

Fuel tank (Ground-level fueling): 34.0 gal.
Cooling system (Cab (canopy 25.7 L)): 29.1 qt.
Hydraulic system, with tank: 33.5 gal.
Hydraulic tank (Hydraulic reservoir): 11.9 gal.
Engine oil, with filter: 13.7 qt.
Torque converter and transmission: 16.0 qt.
Rear axle: 19.0 qt.
Diesel exhaust fluid (DEF) (FT4/Stage IV build only): 3.6 gal.
MFWD front axle housing: 1.7 US gal
MFWD planetary housing (each): 0.2 US gal

Service intervals

Engine oil and filter: 500 hours
Fuel filters (Primary and final): 500 hours
Transmission oil: 1,000 hours
Transmission filter: 1,000 hours
Hydraulic filter: 1,000 hours
Hydraulic oil: 2,000 hours
Axle oil: 2,000 hours
Coolant: 6,000 hours