Genie Z-45 XC specs
Genie Z-45 XC dimensions
| Letter | Dimension | Metric and imperial |
|---|---|---|
| A | Platform length | 0.76 m2 ft 6 in |
| B | Platform width | 1.83 m6 ft |
| C | Overall height (stowed) | 2.25 m7 ft 4 in |
| D | Overall length (stowed) | 6.65 m21 ft 10 in |
| E | Overall width | 2.29 m7 ft 6 in |
| F | Wheelbase | 2.03 m6 ft 8 in |
| G | Ground clearance (centre) | 0.37 m14.8 in |
Genie Z-45 XC specifications
Genie Z-45 XC (current Z-45 model, 4WD, dual 300/454 kg capacity, Deutz D2.9L Tier 4f diesel standard) per Genie's ANSI A92.20 / CSA B354.6 spec sheet 07/22 (North America, dealer-hosted copy); the Z-45/25 it replaced is not covered.
23 figures in 4 groups
Performance
- Working height
- 15.86 mPlatform height + 2 m (maker's convention)
- Platform height
- 13.86 m
- Horizontal outreach
- 7.55 m
- Up and over height
- 7.44 mUp and over clearance
- Platform capacity
- 300 kgUnrestricted
- Platform capacity (restricted)
- 454 kg
- Platform rotation
- 160°
- Jib length
- 1.52 mVertical jib rotation 133°
- Swing
- 355°Turntable rotation; zero tailswing
- Drive speed (stowed)
- 7.2 km/h
- Drive speed (raised)
- 1 km/h
- Gradeability
- 45% (stowed)
- Tilt sensor activation
- 5°Front to back and side to side
- Turning radius (inside)
- 1.68 m
- Turning radius (outside)
- 4.5 m
Weight
- Operating weight
- 7,421 kgStandard configuration
- Tyre contact pressure
- 552 kPa
Engine
- Engine model
- Deutz D2.9L diesel
- Emissions
- Tier 4 Final
- Gross power
- 37 kW (49 hp)Deutz D2.9L
- Engine options
- Perkins 404F-E22T turbo diesel 36 kW / 49 hp; Ford MSG425 gas/LPG dual fuel 44.7 kW / 60 hp
- Auxiliary power
- 12 V DC
Tyres
- Tyres
- 315/55 D20 foam-filled
Source: Genie Z-45 XC & Z-45 HF spec sheet, ANSI/CSA, 07/22 (dealer-hosted copy, access-lift.com)
Genie Z-45 XC service
What each system holds and when Genie says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.
Loading the 3D machine...
Drag to turn · scroll to zoom · built from the maker's drawing; markers show where each system is
- Engine oil, with filter
- 9 L
- Engine oil and filter, change every
- 1,000 hours
Fluid: Low-ash diesel engine oil, SAE 20W-50 above -5 °C (ships with 15W-40) (Genie Z-45 XC / Z-45 HF Service and Repair Manual 1268197GT (Nov 2020))
Genie refers to the Deutz engine manual for the grade in extreme heat.
The Deutz sits on a swing-out tray at the counterweight end; a boom that idles for hours in the sun still runs the engine hot, so check the dipstick every morning.
Confirm fluid grades in your machine's operator's manual: they vary by build year and climate.
Service capacities
- Fuel tank
- 64 L17 gal
- Hydraulic tank
- 83 L22 gal
- Hydraulic system, with tank
- 113.6 L30 US gal
- Engine oil, with filter
- 9 L2.4 US gal
- Cooling system
- 9.4 L2.5 US gal
- Drive hub (each)
- 0.7 L0.2 US gal
- Turntable rotation drive hub
- 0.8 L0.2 US gal
Service intervals
- Engine oil and filter
- 1,000 hours
- Fuel filters
- 1,000 hours
- Air filter
- 500 hours
- Coolant
- 2,000 hours
- Hydraulic oil
- 2,000 hours
- Hydraulic filters
- 2,000 hours
- Drive hub oil
- 1,000 hours
Compare the Genie Z-45 XC
The machines nearest in size, each drawn beside this one at the same scale.
Moving a Genie Z-45 XC
A first look from the sheet. Your haulier or forwarder confirms the load.
- Length
- 6.65m
- Width
- 2.29m
- Height
- 2.25m
- Weight
- 7.4t
- RoadA beavertail or flatbed truck
- SeaA 40 ft flat rack, out of gauge (over-height): expect a surcharge
Genie Z-45 XC prices and listings in the UAE
Asking prices on EquipmentsFinder, in AED, refreshed daily.
Typical hire, per daymedian of 8
AED 750 /day
No priced Genie Z-45 XC for hire yet: this is all boom lifts
No Genie Z-45 XC for rent listed right now.
Request a Genie Z-45 XCAbout the Genie Z-45 XC
The Genie Z-45 XC is a 7.42-tonne boom lift with a Deutz D2.9L diesel engine rated at 37 kW (49 hp).
Its fuel tank holds 64 L.
A boom lift: a work platform on an articulating or telescopic boom, reaching up and over obstacles to work at height.
Typical jobs: work at height on structures, facade and cladding work, steel erection, maintenance and inspection.
Genie Z-45 XC questions
How much does a Genie Z-45 XC weigh?
7,421 kg (16,360 lb) in working order, with fuel, operator and standard attachment.
What engine and horsepower does the Genie Z-45 XC have?
A Deutz D2.9L diesel engine rated at 37 kW (49 hp) gross.
How high can a Genie Z-45 XC reach?
15.86 m (51 ft 6 in).
What are the Genie Z-45 XC's dimensions?
6.65 m long, 2.29 m wide and 2.25 m high, from Genie's dimension drawing.
How do you transport a Genie Z-45 XC?
Road: a beavertail or flatbed truck. Sea: a 40 ft flat rack, out of gauge (over-height): expect a surcharge.
What is the Genie Z-45 XC's fuel tank capacity?
64 L (17 gal).
How much oil does a Genie Z-45 XC take?
Engine oil: 9 L (2.4 US gal). Hydraulic oil: 113.6 L (30 US gal).
How often does a Genie Z-45 XC need an oil change?
Genie sets the engine oil and filter at every 1,000 hours; in hot, dusty work, check the operator's manual for a shorter interval.
What are the Genie Z-45 XC's main competitors?
The machines nearest it in size are the JLG 450AJ, the Genie S-65 XC. Each has a side-by-side comparison on EquipmentsFinder.
Is the Genie Z-45 XC sold in the UAE?
Yes. The Genie Z-45 XC is sold in the UAE and the Gulf, the USA, other markets worldwide; builds can differ by market, so check emissions and options with the dealer.
What is a Genie Z-45 XC used for?
A boom lift: a work platform on an articulating or telescopic boom, reaching up and over obstacles to work at height. Typical jobs: work at height on structures, facade and cladding work, steel erection, maintenance and inspection.
Need a Genie Z-45 XC on site?
Post the job - where, when and for how long. Suppliers with a machine contact you directly. Free to post.
