Genie Z-45 XC

Genie Z-45 XC (current Z-45 model, 4WD, dual 300/454 kg capacity, Deutz D2.9L Tier 4f diesel standard) per Genie's ANSI A92.20 / CSA B354.6 spec sheet 07/22 (North America, dealer-hosted copy); the Z-45/25 it replaced is not covered.

UAEUSAGlobal

Side

Front

Platform length: 0.76 m
Platform width: 1.83 m
Overall height (stowed): 2.25 m
Overall length (stowed): 6.65 m
Overall width: 2.29 m
Wheelbase: 2.03 m
Ground clearance (centre): 0.37 m

Performance

Working height (Platform height + 2 m (maker's convention)): 15.86 m
Platform height: 13.86 m
Horizontal outreach: 7.55 m
Up and over height (Up and over clearance): 7.44 m
Platform capacity (Unrestricted): 300 kg
Platform capacity (restricted): 454 kg
Platform rotation: 160°
Jib length (Vertical jib rotation 133°): 1.52 m
Swing (Turntable rotation; zero tailswing): 355°
Drive speed (stowed): 7.2 km/h
Drive speed (raised): 1 km/h
Gradeability: 45% (stowed)
Tilt sensor activation (Front to back and side to side): 5°
Turning radius (inside): 1.68 m
Turning radius (outside): 4.5 m

Weight

Operating weight (Standard configuration): 7,421 kg
Tyre contact pressure: 552 kPa

Engine

Engine model: Deutz D2.9L diesel
Emissions: Tier 4 Final
Gross power (Deutz D2.9L): 37 kW (49 hp)
Engine options: Perkins 404F-E22T turbo diesel 36 kW / 49 hp; Ford MSG425 gas/LPG dual fuel 44.7 kW / 60 hp
Auxiliary power: 12 V DC

Tyres

Tyres: 315/55 D20 foam-filled

Service capacities

Fuel tank: 64 L
Hydraulic tank: 83 L
Hydraulic system, with tank: 113.6 L
Engine oil, with filter: 9 L
Cooling system: 9.4 L
Drive hub (each): 0.7 L
Turntable rotation drive hub: 0.8 L

Service intervals

Engine oil and filter: 1,000 hours
Fuel filters (Primary (water separator) and secondary): 1,000 hours
Air filter: 500 hours
Coolant: 2,000 hours
Hydraulic oil: 2,000 hours
Hydraulic filters (Sooner in dust): 2,000 hours
Drive hub oil (First change at 50 h): 1,000 hours