Genie Z-45 XC

Genie Z-45 XC (current Z-45 model, 4WD, dual 300/454 kg capacity, Deutz D2.9L Tier 4f diesel standard) per Genie's ANSI A92.20 / CSA B354.6 spec sheet 07/22 (North America, dealer-hosted copy); the Z-45/25 it replaced is not covered.

UAEUSAGlobal

Side

Front

Platform length: 2 ft 6 in
Platform width: 6 ft
Overall height (stowed): 7 ft 4 in
Overall length (stowed): 21 ft 10 in
Overall width: 7 ft 6 in
Wheelbase: 6 ft 8 in
Ground clearance (centre): 14.8 in

Performance

Working height (Platform height + 2 m (maker's convention)): 51 ft 6 in
Platform height: 45 ft 6 in
Horizontal outreach: 24 ft 9 in
Up and over height (Up and over clearance): 24 ft 5 in
Platform capacity (Unrestricted): 660 lb
Platform capacity (restricted): 1,000 lb
Platform rotation: 160°
Jib length (Vertical jib rotation 133°): 5 ft
Swing (Turntable rotation; zero tailswing): 355°
Drive speed (stowed): 4.5 mph
Drive speed (raised): 0.61 mph
Gradeability: 45% (stowed)
Tilt sensor activation (Front to back and side to side): 5°
Turning radius (inside): 5 ft 6 in
Turning radius (outside): 14 ft 9 in

Weight

Operating weight (Standard configuration): 16,360 lb
Tyre contact pressure: 552 kPa

Engine

Engine model: Deutz D2.9L diesel
Emissions: Tier 4 Final
Gross power (Deutz D2.9L): 49 hp
Engine options: Perkins 404F-E22T turbo diesel 36 kW / 49 hp; Ford MSG425 gas/LPG dual fuel 44.7 kW / 60 hp
Auxiliary power: 12 V DC

Tyres

Tyres: 315/55 D20 foam-filled

Service capacities

Fuel tank: 17 gal
Hydraulic tank: 22 gal
Hydraulic system, with tank: 30 US gal
Engine oil, with filter: 2.4 US gal
Cooling system: 2.5 US gal
Drive hub (each): 0.2 US gal
Turntable rotation drive hub: 0.2 US gal

Service intervals

Engine oil and filter: 1,000 hours
Fuel filters (Primary (water separator) and secondary): 1,000 hours
Air filter: 500 hours
Coolant: 2,000 hours
Hydraulic oil: 2,000 hours
Hydraulic filters (Sooner in dust): 2,000 hours
Drive hub oil (First change at 50 h): 1,000 hours