EF Logo

Bobcat S185 vs Cat 226

The Bobcat S185 is the heavier machine, at 2.82 t against 2.65 t, and the Cat 226 has more power (49.1 kW against 43.3 kW).

The Bobcat S185 is ahead on: dumps higher, reaches higher, lifts or carries more, bigger fuel tank, lower to transport. The Cat 226 is ahead on: more power, more torque, more digging or pushing force, more hydraulic flow, faster, turns tighter, narrower to transport.

Below, every figure both makers publish sits side by side, with the Bobcat S185 and the Cat 226 drawn to the same scale from their dimension drawings.

  1. Bobcat · skid steer loader

    Bobcat S185

    Full specsPDF

  2. Cat · skid steer loader

    Cat 226

    Full specsPDF

  3. Add a model

At a glance

Bold is the machine ahead on each figure, with its lead.

FigureBobcat S185Cat 226
Operating weight2,821 kg2,653 kg
Gross powerHigher is better45.5 kW50.1 kW+10%
Max torqueHigher is better201 Nm208 Nm+4%
Dump height with standard bucketHigher is better2.31 m+11%2.077 m
Operating heightHigher is better3.863 m+6%3.652 m
Rated operating capacityHigher is better839 kg+19%705 kg
Tilt breakout forceHigher is better1,554 kgf1,781 kgf+15%
Pump flowHigher is better64 L/min69 L/min+8%
Fuel tankHigher is better90.8 L+59%57 L
Top speedHigher is better11.8 km/h12.3 km/h+4%
Turning radius with standard bucketLower is better2.001 m1.977 m+1%
Width over tyresLower is better1.676 m1.497 m+11%
Height with operator cabLower is better1.938 m+4%2.028 m
Length with standard bucket3.309 m3.234 m

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Dimensions

Operating height3.863 m3.652 mmaximum overall height
Height with operator cab1.938 m2.028 mheight to top of cab
Angle of departure23°28°
Ground clearance0.191 m0.175 m
Wheelbase1.03 m1.054 m
Length without attachment2.586 m2.524 mwithout bucket
Length with standard bucket3.309 m3.234 mbucket on ground
Rollback at carry position27°Not published
Dump height with standard bucket2.31 m2.077 mclearance at maximum lift and dump
Dump reach at maximum height0.752 m0.533 mreach at maximum lift and dump
Height to bucket hinge pin3.002 m2.818 mat maximum lift
Dump angle at maximum height42°47°maximum dump angle
Rollback fully raised at maximum height95°89°rack back angle at maximum height
Bucket width1.575 m62-inch bucket1.576 m
Turning radius with standard bucket2.001 m1.977 mfrom centre to bucket
Rear clearance of machine1.579 mNot published
Tread width1.433 m10-16.5 tyresNot published
Width over tyres1.676 m10-16.5 tyres1.497 m
Bucket pin height at carry positionNot published0.215 m
Bumper overhang behind rear axleNot published0.894 m
Turning radius from centre, machine rearNot published1.513 m
Turning radius from centre, couplerNot published1.104 m
Maximum reach with arms parallel to groundNot published1.288 m

Weight

Operating weight2,821 kg2,653 kg

Performance

Rated operating capacity839 kgSAE J732; 885 kg with counterweight option705 kg
Tipping load1,849 kg1,410 kg
Lift breakout force1,588 kgfNot published
Tilt breakout force1,554 kgf1,781 kgftilt cylinder
Push force1,905 kgfNot published
Top speed11.8 km/h12.3 km/hone speed, forward or reverse
Rated operating capacity with optional counterweightNot published750 kg
Top speed (two-speed option)Not published17.8 km/hforward or reverse

Engine

Engine modelKubota V2607-DI-TE3B-BC-2Cat C2.2 CRDI
Cylinders4Not published
Displacement2.6 L2.2 L
Gross power45.5 kW (61 hp)at 2,700 rpm (SAE)50.1 kW (67.1 hp)SAE J1995
Net power43.3 kW (58 hp)at 2,700 rpm (SAE)49.1 kW (65.8 hp)SAE 1349
Max torque201 Nmat 1,425 rpm (SAE gross)208 Nmat 1,500 rpm (SAE J1995)
EmissionsNot publishedU.S. EPA Tier 4 Final / EU Stage V
BoreNot published84 mm
StrokeNot published100 mm

Hydraulics

Pump flow64 L/minstandard, at 3,135 rpm, gear pump69 L/minstandard flow, loader hydraulic flow
Pump flow (high flow)100 L/minhigh-flow option, at 3,135 rpm99 L/min
Max pressure23.1 MPasystem relief at quick couplers23 000 kPaloader hydraulic pressure, standard flow
Hydraulic powerNot published26.5 kW (35.5 hp)standard flow, calculated
Max pressure (high flow)Not published23 000 kPahigh-flow option
Hydraulic power (high flow)Not published38 kW (50.9 hp)high-flow option, calculated

Service capacities

Fuel tank90.8 L57 L
Engine oil, with filter9 L10 L
Hydraulic tank18.2 Lhydraulic/hydrostatic reservoir34 L
Hydraulic system, with tank32.2 L45 L
Cooling system10.4 Lwithout heater12 L
Chaincase34.1 Ltransmission (final drive)Not published
Chain box, each sideNot published7 L

Service intervals

Engine oil and filter250 hours500 hours
Fuel filters250 hours500 hours
Hydraulic/hydrostatic filter500 hoursNot published
Hydraulic oil1,000 hours3,000 hours
Chaincase oil1,000 hoursNot published
Case drain filters1,000 hoursNot published
Coolantevery 2 yearsNot published
Air filter, primary and secondaryNot published500 hours
Hydraulic oil filterNot published1,000 hours
Drive chain oilNot published1,000 hours

Tyres

TyresNot publishedCat 10 × 16.5

Cab

ROPSNot publishedISO 3471:2008
FOPSNot publishedISO 3449:2005 Level I
Sound level, inside cabNot published83 dB(A)ISO 6396:2008
Sound level, outside cabNot published102 dB(A)2000/14/EC

Sources: Bobcat S185 Skid-Steer Loader Specifications, 6 October 2007 (North America), archive copy - dimension drawing and letters · Cat 226D3 Skid Steer Loader spec sheet AEHQ8205-03 (07-2026), Am North / EU / APD / ANZP

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

0 m1 m2 m3 m
Bobcat S185Cat 226Same scale, front edges and ground lined up.

Bobcat S185 vs Cat 226: questions

Which is bigger, the Bobcat S185 or Cat 226?

By operating weight the Bobcat S185 is the biggest at 2.82 t, then the Cat 226 at 2.65 t.

Which has more power, the Bobcat S185 or Cat 226?

The Cat 226: Bobcat S185 45.5 kW (61 hp), Cat 226 50.1 kW (67.1 hp) (gross power), a 10% difference.

Which lifts or carries more, the Bobcat S185 or Cat 226?

The Bobcat S185: Bobcat S185 839 kg, Cat 226 705 kg (rated operating capacity), a 19% difference.

Which has the bigger fuel tank, the Bobcat S185 or Cat 226?

The Bobcat S185: Bobcat S185 90.8 L, Cat 226 57 L (fuel tank), a 59% difference.

Which turns tighter, the Bobcat S185 or Cat 226?

The Cat 226: Bobcat S185 2.001 m, Cat 226 1.977 m (turning radius with standard bucket), a 1% difference.

Which is narrower to transport, the Bobcat S185 or Cat 226?

The Cat 226: Bobcat S185 1.676 m, Cat 226 1.497 m (width over tyres), a 11% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.

More comparisons

EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.