Bobcat E26 specs
- digging depth
- 2.568 m
- power
- 14.9 kW (20 hp)
- operating weight
- 2,608 kg
Bobcat E26 dimensions
| Letter | Dimension | Metric and imperial |
|---|---|---|
| H | Overall length | 4.174 m13.7 ft |
| G | Track length | 1.965 m6.4 ft |
| D | Track length on ground | 1.543 m5.1 ft |
| E | Swing centre to blade | 1.462 m4.8 ft |
| F | Swing centre to front (transport) | 3.192 m10.5 ft |
| K | Overall height (to top of cab) | 2.438 m8 ft |
| C | Height to top of engine cover | 1.54 m5.1 ft |
| B | Ground clearance, counterweight | 0.539 m1.8 ft |
| A | Blade height | 0.319 m1 ft |
| I | Track lug height | 0.021 m0.1 ft |
| J | Blade width | 1.5 m4.9 ft |
| L | Shoe width | 0.25 m0.8 ft |
| P | Tail swing radius | 0.82 m2.7 ft |
Bobcat E26 specifications
Bobcat E26 new-generation 2.6-tonne reduced-tail-swing mini excavator (Yanmar 3TNV76, Stage V, cylinder-inside-boom) as listed by Bobcat Middle East & Africa; figures from the Bobcat E26/E27z/E27 brochure B4501724-EN (09-24), which match the MEA product page; cab, standard dipperstick and 1500 mm blade.
40 figures in 5 groups
Dimensions
- Tail swing radius, medium counterweight
- 0.84 mP* in the table
Performance
- Max digging reach
- 4.542 m
- Max reach at ground level
- 4.413 mWorking range C
- Max digging depth
- 2.568 mWorking range K
- Max vertical wall digging depth
- 1.474 mWorking range J
- Max digging height
- 4.006 mWorking range H, maximum bucket tooth height
- Max dumping height
- 2.845 mWorking range I
- Max height of working equipment, dipperstick retracted
- 3.104 mWorking range G
- Max working equipment radius, boom at max height, dipperstick retracted
- 2.052 mWorking range D
- Max blade height
- 0.385 mWorking range E, above ground
- Max blade depth
- 0.42 mWorking range F, below ground
- Bucket rotation
- 185°Working range A, bucket pivot angle
- Front swing radius (minimum)
- 1.755 mPlan view O, minimum turning radius
- Boom swing offset, left
- 0.58 m
- Boom swing offset, right
- 0.705 mPlan view N, right-hand rotation
- Working width at max left-hand rotation
- 1.616 mPlan view R
- Working width at max right-hand rotation
- 1.741 mPlan view Q
- Boom swing, left
- 60°
- Boom swing, right
- 60°
- Bucket digging force
- 24 kN
- Arm digging force
- 16 kN
- Swing speed
- 9.3 rpmSlew rate
- Drawbar pull
- 29 kN
- Travel speed (high)
- 4.3 km/h
- Travel speed (low)
- 2.5 km/h
Weight
- Operating weight
- 2,608 kgWith cab and bucket, ISO 6016
- Transport mass
- 2,477 kgNo attachment
- Weight reduction with canopy
- -118 kg
- Ground pressure
- 30.3 kPaRubber tracks
Engine
- Engine model
- Yanmar 3TNV76-PBC
- Emissions
- EU Stage V
- Cylinders
- 3
- Displacement
- 1.1 L
- Gross power
- 14.9 kW (20 hp)Maximum power at 2,400 rpm, ISO 14396
- Max torque
- 66 NmAt 1,800 rpm, SAE J1995
- Engine oil, with filter
- 3.6 L
- Cooling system
- 4.3 LWith heater (3.9 L without)
Hydraulics
- Pump flow
- 94 L/min
- Auxiliary circuit flow (AUX1)
- 54 L/minRelief 180 bar
- Auxiliary circuit flow (AUX2)
- 20 L/minRelief 179 bar
Bobcat E26 service
What each system holds and when Bobcat says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.
Loading the 3D machine...
Drag to turn · scroll to zoom · built from the maker's drawing; markers show where each system is
- Engine oil, with filter
- 3.6 L
- Engine oil and filter, change every
- 250 hours
The 3TNV76 holds 3.6 litres and Bobcat changes it every 250 hours - half the interval of larger machines - so do not stretch it.
Confirm fluid grades in your machine's operator's manual: they vary by build year and climate.
Service capacities
- Fuel tank
- 34.4 L9.1 US gal
- Hydraulic tank
- 10.2 L2.7 US gal
- Hydraulic system, with tank
- 23 L6.1 US gal
Service intervals
- Engine oil and filter
- 250 hours
- Fuel filters
- 250 hours
- Hydraulic oil
- 500 hours
- Hydraulic filter
- 500 hours
- Final drive oil, first change
- 50 hours
- Swing bearing grease
- 50 hours
- Pivot points grease
- 10 hours
- Engine valve clearance
- 1,000 hours
Compare the Bobcat E26
The machines nearest in size, each drawn beside this one at the same scale.
Moving a Bobcat E26
A first look from the sheet. Your haulier or forwarder confirms the load.
- Length
- 4.17m
- Width
- Not published
- Height
- 2.44m
- Weight
- 2.6t
- RoadA plant trailer behind a pickup
- SeaA 20 ft flat rack, out of gauge (over-height): expect a surcharge
Bobcat E26 prices and listings in the UAE
Asking prices on EquipmentsFinder, in AED, refreshed daily.
No Bobcat E26 for rent listed right now.
Request a Bobcat E26About the Bobcat E26
The Bobcat E26 is a 2.61-tonne mini excavator with a Yanmar 3TNV76-PBC engine rated at 14.9 kW (20 hp).
Its fuel tank holds 34.4 L.
A mini excavator: a compact tracked digger, light enough to trailer and narrow enough for gardens, basements and utility work between buildings.
Typical jobs: trenching for services, landscaping and garden work, footings and foundations, demolition in tight spaces.
Bobcat E26 questions
How much does a Bobcat E26 weigh?
2,608 kg (5,750 lb) in working order, with fuel, operator and standard attachment.
What engine and horsepower does the Bobcat E26 have?
A Yanmar 3TNV76-PBC engine rated at 14.9 kW (20 hp) gross.
How deep can a Bobcat E26 dig?
The Bobcat E26 digs to 2.568 m (8.4 ft).
How do you transport a Bobcat E26?
Road: a plant trailer behind a pickup. Sea: a 20 ft flat rack, out of gauge (over-height): expect a surcharge.
What is the Bobcat E26's fuel tank capacity?
34.4 L (9.1 US gal).
How much oil does a Bobcat E26 take?
Engine oil: 3.6 L (1 US gal). Hydraulic oil: 23 L (6.1 US gal).
How often does a Bobcat E26 need an oil change?
Bobcat sets the engine oil and filter at every 250 hours; in hot, dusty work, check the operator's manual for a shorter interval.
What are the Bobcat E26's main competitors?
The machines nearest it in size are the Cat 302 CR, the Bobcat 331, the John Deere 35 P-Tier. Each has a side-by-side comparison on EquipmentsFinder.
Is the Bobcat E26 sold in the UAE?
Yes. The Bobcat E26 is sold in the UAE and the Gulf, the USA, other markets worldwide; builds can differ by market, so check emissions and options with the dealer.
What is a Bobcat E26 used for?
A mini excavator: a compact tracked digger, light enough to trailer and narrow enough for gardens, basements and utility work between buildings. Typical jobs: trenching for services, landscaping and garden work, footings and foundations, demolition in tight spaces.
Need a Bobcat E26 on site?
Post the job - where, when and for how long. Suppliers with a machine contact you directly. Free to post.
