EF Logo

Hyundai HX220S vs Komatsu PC210

The Hyundai HX220S is the heavier machine, at 21.3 t against 20.5 t, and the Komatsu PC210 has more power (123 kW against 108 kW).

The Hyundai HX220S is ahead on: reaches further, faster, turns tighter, lower to transport. The Komatsu PC210 is ahead on: more power, digs deeper, dumps higher, bigger bucket or body, more digging or pushing force, bigger fuel tank, narrower to transport.

Below, every figure both makers publish sits side by side, with the Hyundai HX220S and the Komatsu PC210 drawn to the same scale from their dimension drawings.

  1. Hyundai · excavator

    Hyundai HX220S

    Full specsPDF

  2. Komatsu · excavator

    Komatsu PC210

    Full specsPDF

  3. Add a model

At a glance

Bold is the machine ahead on each figure, with its lead.

FigureHyundai HX220SKomatsu PC210
Operating weight21,260 kg20,500 kg
Gross powerHigher is better110 kW123 kW+12%
Max digging depthHigher is better6.5 m6.515 m
Max digging reachHigher is better9.945 m+1%9.86 m
Max dumping heightHigher is better6.99 m7.16 m+2%
Bucket capacityHigher is better0.92 m³1 m³+9%
Bucket digging forceHigher is better130 kN149 kN+14%
Fuel tankHigher is better340 L400 L+18%
Travel speed (high)Higher is better5.7 km/h+4%5.5 km/h
Tail swing radiusLower is better2.845 m+2%2.9 m
Overall widthLower is better2.99 m2.8 m+6%
Overall height (to top of boom)Lower is better2.96 m+1%3.005 m
Overall length9.55 m9.55 m

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Dimensions

Overall length9.55 m9.55 m
Overall height (to top of boom)2.96 m3.005 m
Overall width2.99 m2.8 m
Overall width of upperstructure2.7 mNot published
Overall height (to top of cab)3.035 m3.045 m
Ground clearance, counterweight1.095 m1.085 m
Ground clearance (minimum)0.475 m0.44 m
Tail swing radius2.845 m2.9 m
Swing centre to rear end2.77 m2.86 m
Track length on ground3.65 m3.275 m
Track length4.443 m4.07 m
Track gauge2.39 m2.2 m
Shoe width0.6 m0.6 m
Length on ground (transport)Not published4.825 m
Width of crawlerNot published2.8 m
Grouser heightNot published0.026 m
Machine cab heightNot published2.095 m
Machine cab widthNot published2.71 m

Working range

Max digging reach9.945 m9.86 m
Max reach at ground level9.78 m9.68 m
Max digging depth6.5 m6.515 m
Max depth cut for 2,440 mm level bottom6.315 mNot published
Max vertical wall digging depth5.96 m5.81 m
Max digging height9.75 m10.065 m
Max dumping height6.99 m7.16 m
Min front swing radius3.425 m2.99 m

Performance

Bucket capacity0.92 m³1 m³
Bucket digging force130 kN149 kN
Arm digging force103 kN108 kN
Swing speed12.2 rpm12.4 min-1
Travel speed (high)5.7 km/hLow 3.5 km/h5.5 km/hAuto-shift; mid 4.1 km/h, low 3.0 km/h
Max drawbar pull21,100 kgf178 kN18,200 kgf
Gradeability35°70%35°70%
Bucket digging force (SAE)Not published132 kN
Arm digging force (SAE)Not published103 kN

Weight

Operating weight21,260 kg20,500 kg
Ground pressure0.45 kgf/cm2600 mm shoes46.8 kPaPC210-10M0, 600 mm shoes; 0.48 kgf/cm2
Counterweight3,600 kgNot published
Operating weight (700 mm shoes)Not published20,900 kg
Operating weight (800 mm shoes)Not published21,100 kg
Operating weight (500 mm shoes)Not published20,400 kg

Engine

Engine modelHyundai 6BTAA-5.9 (HM5.9)Komatsu SAA6D107E-1
Emissions~Tier 2EU Stage 3A emission equivalent
Cylinders66
Displacement5,900 cc6.7 L
Gross power110 kW (148 HP)SAE J1995, at 2,000 rpm123 kW (165 HP)SAE J1995, at 2000 min-1
Net power108 kW (145 HP)SAE J1349, at 2,000 rpm123 kW (165 HP)
Max torque64 kgf.m at 1,300 rpmNot published
BoreNot published107 mm
StrokeNot published124 mm

Hydraulics

Pump flow2 x 234 l/min475 L/min
Max pressure350 kgf/cm237.3 MPa (380 kgf/cm2)
Max pressure, swing265 kgf/cm2Relief valve setting28.9 MPa (295 kgf/cm2)Relief valve setting
Working modesNot published6Selectable working modes

Service capacities

Fuel tank340 L400 L
Cooling system20 LEngine coolant21.8 LCoolant
Engine oil20 L23.1 LRefill capacity ("Engine")
Swing device6.2 LNot published
Final drive (each)4.5 L3.3 L
Hydraulic system, with tank275 LNot published
Hydraulic tank160 L135 L
Swing driveNot published5.3 L

Undercarriage

Track rollers (each side)Not published7PC210-10M0 (LC: 9)
Carrier rollers (each side)Not published2
Track shoes (each side)Not published45PC210-10M0 (LC: 49)

Service intervals

Hydraulic oil filterNot published2,500 hoursKomatsu: 2.5 times the earlier 1,000 h

Sources: HD Hyundai HX210S / HX220S brochure (2024, ENG_HX210S,220S 24.06) · Komatsu PC210/210LC-10M0 brochure CEN00820-03 (Komatsu Middle East)

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

0 m1 m2 m3 m4 m5 m6 m7 m8 m9 m
Hyundai HX220SKomatsu PC210Same scale, front edges and ground lined up.

Hyundai HX220S vs Komatsu PC210: questions

Which is bigger, the Hyundai HX220S or Komatsu PC210?

By operating weight the Hyundai HX220S is the biggest at 21.3 t, then the Komatsu PC210 at 20.5 t.

Which has more power, the Hyundai HX220S or Komatsu PC210?

The Komatsu PC210: Hyundai HX220S 110 kW (148 HP), Komatsu PC210 123 kW (165 HP) (gross power), a 12% difference.

Which digs deeper, the Hyundai HX220S or Komatsu PC210?

The Komatsu PC210: Hyundai HX220S 6.5 m, Komatsu PC210 6.515 m (max digging depth), a 0% difference.

Which reaches further, the Hyundai HX220S or Komatsu PC210?

The Hyundai HX220S: Hyundai HX220S 9.945 m, Komatsu PC210 9.86 m (max digging reach), a 1% difference.

Which has the bigger bucket, the Hyundai HX220S or Komatsu PC210?

The Komatsu PC210: Hyundai HX220S 0.92 m³, Komatsu PC210 1 m³ (bucket capacity), a 9% difference.

Which has the bigger fuel tank, the Hyundai HX220S or Komatsu PC210?

The Komatsu PC210: Hyundai HX220S 340 L, Komatsu PC210 400 L (fuel tank), a 18% difference.

Which turns tighter, the Hyundai HX220S or Komatsu PC210?

The Hyundai HX220S: Hyundai HX220S 2.845 m, Komatsu PC210 2.9 m (tail swing radius), a 2% difference.

Which is narrower to transport, the Hyundai HX220S or Komatsu PC210?

The Komatsu PC210: Hyundai HX220S 2.99 m, Komatsu PC210 2.8 m (overall width), a 6% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.

More comparisons

EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.