EF Logo

Hyundai HX220S vs Komatsu PC400

The Komatsu PC400 is the heavier machine, at 41.7 t against 21.3 t, and the Komatsu PC400 has more power (257 kW against 108 kW).

The Hyundai HX220S is ahead on: turns tighter, narrower to transport, lower to transport. The Komatsu PC400 is ahead on: more power, digs deeper, reaches further, dumps higher, bigger bucket or body, more digging or pushing force, bigger fuel tank.

Below, every figure both makers publish sits side by side, with the Hyundai HX220S and the Komatsu PC400 drawn to the same scale from their dimension drawings.

  1. Hyundai · excavator

    Hyundai HX220S

    Full specsPDF

  2. Komatsu · excavator

    Komatsu PC400

    Full specsPDF

  3. Add a model

At a glance

Bold is the machine ahead on each figure, with its lead.

FigureHyundai HX220SKomatsu PC400
Operating weight21,260 kg41,740 kg
Gross powerHigher is better110 kW270 kW+145%
Max digging depthHigher is better6.5 m7.82 m+20%
Max digging reachHigher is better9.945 m12.025 m+21%
Max dumping heightHigher is better6.99 m7.565 m+8%
Bucket capacityHigher is better0.92 m³1.9 m³+107%
Bucket digging forceHigher is better130 kN275 kN+111%
Fuel tankHigher is better340 L650 L+91%
Tail swing radiusLower is better2.845 m+22%3.645 m
Overall widthLower is better2.99 m+13%3.43 m
Overall height (to top of boom)Lower is better2.96 m+19%3.635 m
Overall length9.55 m11.94 m

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Dimensions

Overall length9.55 m11.94 m
Overall height (to top of boom)2.96 m3.635 mwith grousers
Overall width2.99 m3.43 m
Overall width of upperstructure2.7 mNot published
Overall height (to top of cab)3.035 m3.285 mwith grousers
Ground clearance, counterweight1.095 m1.32 m
Ground clearance (minimum)0.475 m0.555 m
Tail swing radius2.845 m3.645 m
Swing centre to rear end2.77 m3.605 m
Track length on ground3.65 m4.02 m
Track length4.443 m5.055 m
Track gauge2.39 m2.74 m
Shoe width0.6 m0.6 m
Length on ground (transport)Not published6.54 m
Width of crawlerNot published3.34 m

Working range

Max digging reach9.945 m12.025 m
Max reach at ground level9.78 m11.82 m
Max digging depth6.5 m7.82 m3.38 m arm
Max depth cut for 2,440 mm level bottom6.315 mNot published
Max vertical wall digging depth5.96 mNot published
Max digging height9.75 m10.915 m
Max dumping height6.99 m7.565 m
Min front swing radius3.425 mNot published

Performance

Bucket capacity0.92 m³1.9 m³heaped; 1.3 to 2.8 m³ offered
Bucket digging force130 kN275 kNISO 6015
Arm digging force103 kN214 kNISO 6015
Swing speed12.2 rpm9.1 rpm
Travel speed (high)5.7 km/hLow 3.5 km/hNot published
Max drawbar pull21,100 kgfNot published
Gradeability35°70%Not published

Weight

Operating weight21,260 kg41,740 kg600 mm shoes
Ground pressure0.45 kgf/cm2600 mm shoesNot published
Counterweight3,600 kgNot published

Engine

Engine modelHyundai 6BTAA-5.9 (HM5.9)Komatsu SAA6D125E-5
Emissions~Tier 2Tier 2 / Stage 2 equivalent
Cylinders66
Displacement5,900 cc11 L
Gross power110 kW (148 HP)SAE J1995, at 2,000 rpm270 kW (362 hp)at 1,900 rpm
Net power108 kW (145 HP)SAE J1349, at 2,000 rpm257 kW (345 hp)at 1,900 rpm
Max torque64 kgf.m at 1,300 rpmNot published

Hydraulics

Pump flow2 x 234 l/min690 L/min
Max pressure350 kgf/cm2373 barimplement circuits
Max pressure, swing265 kgf/cm2Relief valve settingNot published

Service capacities

Fuel tank340 L650 L
Cooling system20 LEngine coolant36 L
Engine oil20 L37 L
Swing device6.2 LNot published
Final drive (each)4.5 L10.5 L
Hydraulic system, with tank275 LNot published
Hydraulic tank160 L248 L
Swing driveNot published20 L

Swing, travel and hydraulics

Travel speedsNot published5.5 / 4.0 / 3.0 km/h

Service intervals

Engine oil and filterNot published500 hours
Hydraulic filterNot published1,000 hours
Hydraulic oilNot published5,000 hours

Sources: HD Hyundai HX210S / HX220S brochure (2024, ENG_HX210S,220S 24.06) · Komatsu PC400-8R brochure CEN00273-05 (Komatsu Middle East)

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

0 m1 m2 m3 m4 m5 m6 m7 m8 m9 m10 m11 m
Hyundai HX220SKomatsu PC400Same scale, front edges and ground lined up.

Hyundai HX220S vs Komatsu PC400: questions

Which is bigger, the Hyundai HX220S or Komatsu PC400?

By operating weight the Komatsu PC400 is the biggest at 41.7 t, then the Hyundai HX220S at 21.3 t.

Which has more power, the Hyundai HX220S or Komatsu PC400?

The Komatsu PC400: Hyundai HX220S 110 kW (148 HP), Komatsu PC400 270 kW (362 hp) (gross power), a 145% difference.

Which digs deeper, the Hyundai HX220S or Komatsu PC400?

The Komatsu PC400: Hyundai HX220S 6.5 m, Komatsu PC400 7.82 m (max digging depth), a 20% difference.

Which reaches further, the Hyundai HX220S or Komatsu PC400?

The Komatsu PC400: Hyundai HX220S 9.945 m, Komatsu PC400 12.025 m (max digging reach), a 21% difference.

Which has the bigger bucket, the Hyundai HX220S or Komatsu PC400?

The Komatsu PC400: Hyundai HX220S 0.92 m³, Komatsu PC400 1.9 m³ (bucket capacity), a 107% difference.

Which has the bigger fuel tank, the Hyundai HX220S or Komatsu PC400?

The Komatsu PC400: Hyundai HX220S 340 L, Komatsu PC400 650 L (fuel tank), a 91% difference.

Which turns tighter, the Hyundai HX220S or Komatsu PC400?

The Hyundai HX220S: Hyundai HX220S 2.845 m, Komatsu PC400 3.645 m (tail swing radius), a 22% difference.

Which is narrower to transport, the Hyundai HX220S or Komatsu PC400?

The Hyundai HX220S: Hyundai HX220S 2.99 m, Komatsu PC400 3.43 m (overall width), a 13% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.

More comparisons

EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.