EF Logo

Cat 950 vs Hitachi ZW140-7

The Cat 950 is the heavier machine, at 18.1 t against 11.8 t, and the Cat 950 has more power (172 kW against 114 kW).

The Cat 950 is ahead on: more power, more torque, reaches higher, bigger bucket or body, lifts or carries more, more digging or pushing force, more hydraulic flow, bigger fuel tank, faster. The Hitachi ZW140-7 is ahead on: dumps higher, narrower to transport, lower to transport.

Below, every figure both makers publish sits side by side, with the Cat 950 and the Hitachi ZW140-7 drawn to the same scale from their dimension drawings.

  1. Cat · wheel loader

    Cat 950

    Full specsPDF

  2. Hitachi · wheel loader

    Hitachi ZW140-7

    Full specsPDF

  3. Add a model

At a glance

Bold is the machine ahead on each figure, with its lead.

FigureCat 950Hitachi ZW140-7
Operating weight18,076 kg11,840 kg
Gross powerHigher is better186 kW+62%115 kW
Max torqueHigher is better1,236 Nm+74%712 Nm
Dump clearance at max liftHigher is better2.844 m2.865 m+1%
Hinge pin height (max lift)Higher is better3.981 m+5%3.8 m
Bucket capacityHigher is better3.1 m³+55%2 m³
Static tipping load (full turn)Higher is better10,936 kg+33%8,240 kg
Breakout forceHigher is better152 kN+55%98 kN
Pump flowHigher is better322 L/min+66%194 L/min
Fuel tankHigher is better259.5 L+27%205 L
Top speedHigher is better39.5 km/h+1%39 km/h
Width over tyresLower is better2.8 m2.47 m+12%
Height to top of cabLower is better3.456 m3.275 m+5%

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Dimensions

Overall length (bucket on ground)8.238 m7.22 m
Overall length (without bucket)6.797 mStandard lift6.235 m
Wheelbase3.35 m3 m
Height to top of cab3.456 mHeight to top of ROPS3.275 m
Height to top of exhaust3.408 mNot published
Height to top of hood2.695 mNot published
Ground clearance0.354 m0.425 m
Tread width2.14 m1.93 m
Width over tyres2.8 mUnloaded, over tyre bulge2.47 m
Bucket width2.927 m2.48 m
Hinge pin height (max lift)3.981 mStandard lift3.8 m
Dump clearance at max lift2.844 m2.865 mAt 45 degrees, full height; 2.0 m³ bucket
Reach at max lift1.325 m0.89 m45 degree dump, full height; 2.0 m³ bucket
Overall height, bucket at max lift5.313 mNot published
Rear axle to rear bumper1.942 mNot published
Turning radius (outside of bucket)6.679 mNot published
Clearance circle (dia) to outside of tyres12.028 mNot published
Turning radius (centre of outside tyre)Not published5.085 m
Turning radius (inside of inside tyre)Not published2.875 m
Turning radius (outside of bucket at carry)Not published5.86 m
Overall operating height at full heightNot published5.015 m
Bucket pin height at carryNot published0.535 mHeight of bucket pin at carry
Lift arm clearance at full heightNot published3.55 mStandard arm
Digging depthNot published0.04 m
Roll back at carryNot published50°
Roll back at groundNot published42°
Roll back angle at full heightNot published55°

Weight

Operating weight18,076 kg11,840 kg

Engine

Engine modelCat C7.1Cummins B4.5
EmissionsBrazil MAR-1 / UN ECE R96 Stage IIIA (equivalent to U.S. EPA Tier 3 / EU Stage IIIA)EU Stage V
Displacement7 L4.5 L
Gross power186 kW (249 hp)ISO 14396:2002 @ 2,100 rpm115 kW (154 hp)
Gross power (SAE J1995:2014)191 kW (256 hp)SAE J1995:2014 @ 2,100 rpmNot published
Net power172 kW (231 hp)ISO 9249:2007 / SAE J1349:2011 @ 2,100 rpm114 kW (153 hp)ISO 9249 at 2,200 rpm
Max torque1,236 NmISO 14396:2002 @ 1,400 rpm712 NmGross at 1,200 rpm; net 704 Nm
CylindersNot published4

Performance

Bucket capacity3.1 m³2 m³
Bucket capacity range2.5–9.9 m³ (3.3–13.0 yd³)Not published
Static tipping load (full turn)10,936 kg8,240 kg
Breakout force152 kNMachine configuration defined under "Weight"98 kN2.0 m³ bucket; 9,990 kgf
Top speed39.5 km/hForward 5, empty bucket, standard L3 tyres39 km/h4th gear, 20.5R25 tyres
Static tipping load (straight)Not published9,490 kgISO 14397-1, 2.0 m³ bucket
Travel speed, 1stNot published13 km/h
Travel speed, 2ndNot published13 km/h
Travel speed, 3rdNot published20 km/h
Lift arm raise timeNot published4.9 s
Lift arm lower timeNot published3.1 s
Bucket dump timeNot published1.2 s
Total hydraulic cycle timeNot published9.2 s

Hydraulics

Pump flow322 L/minImplement pump, maximum output at 2,340 rpm194 L/minMain gear pump (also steering), at 2,200 rpm
Max pressure279 bar206 bar
Brake, fan and pilot pump flowNot published45 L/min

Transmission

Forward 16.9 km/hNot published
Forward 212 km/hNot published
Forward 319.3 km/hNot published
Forward 425.7 km/hNot published
Forward 539.5 km/hNot published
Reverse 16.9 km/hNot published
Reverse 212 km/hNot published
Reverse 325.7 km/hNot published
Steering angleNot published40°Each direction, 80 degrees total
Oscillation angleNot published20°Total (+10 / -10)

Tyres

TyresBridgestone 23.5R25 VJT L3 radial20.5R25 (L3)

Service capacities

Fuel tank259.5 L205 L
Cooling system54 LTier 3 engine20 L
Engine oil, with filter21 LNot published
Transmission43 L2-motor hydrostatic with summation gearbox, fixed-ratio powershift countershaft, 4 speeds
Differentials and final drives, front43 L24 L
Differentials and final drives, rear43 L25 L
Hydraulic tank97 L80 L
Engine oilNot published16 L
DEF/AdBlue tankNot published25 L

Service intervals

Engine oil and filter1,000 hoursCat DEO-ULS; 950M/962M chartNot published
Fuel filters500 hoursNot published
Hydraulic oil filter1,000 hoursNot published
Transmission oil filter1,000 hoursAlso at the first 500 h; 950M/962M chartNot published
Transmission oil2,000 hoursCat SATO; 950M/962M chartNot published
Differential oil (front and rear)2,000 hoursNot published
Hydraulic oil3,000 hoursCat HYDO Advanced; 950M/962M chartNot published
Coolant extender6,000 hoursCat ELC Extender; 950M/962M chartNot published
Coolant12,000 hoursCat ELC; 950M/962M chartNot published

Sources: Cat 950 Wheel Loader Technical Specifications AEXQ3868-00 (7-2024) · Hitachi ZW140-7 / ZW160-7 brochure (Hitachi Construction Machinery Australia, Dec 2023)

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

0 m1 m2 m3 m4 m5 m6 m7 m8 m
Cat 950Hitachi ZW140-7Same scale, front edges and ground lined up.

Cat 950 vs Hitachi ZW140-7: questions

Which is bigger, the Cat 950 or Hitachi ZW140-7?

By operating weight the Cat 950 is the biggest at 18.1 t, then the Hitachi ZW140-7 at 11.8 t.

Which has more power, the Cat 950 or Hitachi ZW140-7?

The Cat 950: Cat 950 186 kW (249 hp), Hitachi ZW140-7 115 kW (154 hp) (gross power), a 62% difference.

Which has the bigger bucket, the Cat 950 or Hitachi ZW140-7?

The Cat 950: Cat 950 3.1 m³, Hitachi ZW140-7 2 m³ (bucket capacity), a 55% difference.

Which lifts or carries more, the Cat 950 or Hitachi ZW140-7?

The Cat 950: Cat 950 10,936 kg, Hitachi ZW140-7 8,240 kg (static tipping load (full turn)), a 33% difference.

Which has the bigger fuel tank, the Cat 950 or Hitachi ZW140-7?

The Cat 950: Cat 950 259.5 L, Hitachi ZW140-7 205 L (fuel tank), a 27% difference.

Which is narrower to transport, the Cat 950 or Hitachi ZW140-7?

The Hitachi ZW140-7: Cat 950 2.8 m, Hitachi ZW140-7 2.47 m (width over tyres), a 12% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.

More comparisons

EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.