Specification sheetIssued 4 November 2026
Hitachi · wheel loader
Hitachi ZW140-7
Hitachi ZW140-7 wheel loader, EU Stage V build (Cummins B4.5) from Hitachi Construction Machinery Australia's ZW140-7 / ZW160-7 brochure; standard arm, general-purpose bucket with bolt-on cutting edge (2.0 m³ heaped), 20.5R25 L3 tyres. Hitachi CMA is being renamed Landcros.
USAGlobal
- Bucket capacity
- 2 m³
- power
- 114 kW (153 hp)
- Operating weight
- 11,840 kg
- Static tipping load (full turn)
- 8,240 kg
- Overall length (bucket on ground)
- 7.22 m
- Overall length (without bucket)
- 6.235 m
- Height to top of cab
- 3.275 m
- Width over tyres
- 2.47 m
- Wheelbase
- 3 m
- Ground clearance
- 0.425 m
- Tread width
- 1.93 m
- Bucket width
- 2.48 m
- Turning radius (centre of outside tyre)
- 5.085 m
- Turning radius (inside of inside tyre)
- 2.875 m
- Turning radius (outside of bucket at carry)
- 5.86 m
- Overall operating height at full height
- 5.015 m
- Hinge pin height (carry)
- 0.535 m
- Hinge pin height (max lift)
- 3.8 m
- Lift arm clearance at full height
- 3.55 m
- Dump clearance at max lift
- 2.865 m
- Reach at max lift
- 0.89 m
- Digging depth
- 0.04 m
- Roll back at carry
- 50°
- Roll back at ground
- 42°
- Roll back angle at full height
- 55°
A
A'
B
C
D
E
F
G
H
H'
H''
I
J
K
L
M
N
O
P
P'
Q
Weight
- Operating weight
- 11,840 kg
Engine
- Engine model
- Cummins B4.5
- Emissions
- EU Stage V
- Cylinders
- 4
- Displacement
- 4.5 L
- Gross power
- 115 kW (154 hp)
- Net power (ISO 9249 at 2,200 rpm)
- 114 kW (153 hp)
- Max torque (Gross at 1,200 rpm; net 704 Nm)
- 712 Nm
Performance
- Bucket capacity
- 2 m³
- Static tipping load (straight) (ISO 14397-1, 2.0 m³ bucket)
- 9,490 kg
- Static tipping load (full turn)
- 8,240 kg
- Breakout force (2.0 m³ bucket; 9,990 kgf)
- 98 kN
- Top speed (4th gear, 20.5R25 tyres)
- 39 km/h
- Travel speed, 1st
- 13 km/h
- Travel speed, 2nd
- 13 km/h
- Travel speed, 3rd
- 20 km/h
- Lift arm raise time
- 4.9 s
- Lift arm lower time
- 3.1 s
- Bucket dump time
- 1.2 s
- Total cycle time
- 9.2 s
Hydraulics
- Pump flow (Main gear pump (also steering), at 2,200 rpm)
- 194 L/min
- Max pressure
- 206 bar
- Brake, fan and pilot pump flow
- 45 L/min
Transmission
- Transmission
- 2-motor hydrostatic with summation gearbox, fixed-ratio powershift countershaft, 4 speeds
- Steering angle (Each direction, 80 degrees total)
- 40°
- Oscillation angle (Total (+10 / -10))
- 20°
Tyres
- Tyres
- 20.5R25 (L3)
Service capacities
- Fuel tank
- 205 L
- Cooling system
- 20 L
- Engine oil
- 16 L
- Axle oil, front
- 24 L
- Axle oil, rear
- 25 L
- Hydraulic tank
- 80 L
- DEF/AdBlue tank
- 25 L