EF Logo

Cat 730 vs Cat 745

The Cat 745 is the heavier machine, at 33.1 t against 23.3 t, and the Cat 745 has more power (370 kW against 274 kW).

The Cat 730 is ahead on: faster, turns tighter, narrower to transport, lower to transport. The Cat 745 is ahead on: more power, more torque, dumps higher, bigger bucket or body, lifts or carries more, bigger fuel tank.

Below, every figure both makers publish sits side by side, with the Cat 730 and the Cat 745 drawn to the same scale from their dimension drawings.

  1. Cat · articulated dump truck

    Cat 730

    Full specsPDF

  2. Cat · articulated dump truck

    Cat 745

    Full specsPDF

  3. Add a model

At a glance

Bold is the machine ahead on each figure, with its lead.

FigureCat 730Cat 745
Operating weight23,300 kg33,110 kg
Gross powerHigher is better280 kW381 kW+36%
Max torqueHigher is better2,141 Nm2,618 Nm+22%
Dump height (body raised)Higher is better6.46 m7.288 m+13%
Body capacity (SAE 2:1 heaped)Higher is better17.6 m³25.5 m³+45%
Payload (nominal)Higher is better28 t41 t+46%
Fuel tankHigher is better400 L550 L+38%
Top speedHigher is better55 km/h54.8 km/h
SAE turning radiusLower is better7.47 m+13%8.625 m
Overall widthLower is better3.676 m+3%3.801 m
Overall height (cab)Lower is better3.498 m+7%3.762 m
Overall length10.445 m11.432 m

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Dimensions

Overall length10.445 m11.432 m
Overall length with tailgate10.593 m11.559 m
Overall width3.676 m3.801 m
Overall height (cab)3.498 m3.762 m
Loading height2.956 m3.261 m
Dump height (body raised)6.46 m7.288 m
Ground clearance0.537 m0.59 m
Ground clearance, body fully tipped0.549 m0.779 m
Front axle to machine front3.21 m3.418 m
Front axle to mid axle3.979 m4.59 m
Tandem axle spacing1.7 m1.966 m
Rear axle to body rear1.556 m1.458 m
Body length5.789 m6.402 m
Body length, inside5.432 m5.929 m
Width over tailgate2.984 m3.774 m
Body width2.902 m3.422 m
Track width2.275 m2.687 m
Width over tyres2.877 mNot published
Width over fenders2.95 m3.37 m
Max laden width over tyre bulge2.95 m3.5 m

Weight

Operating weight23,300 kgTotal, empty33,110 kgTotal, empty
Payload (nominal)28 tRated payload41 tRated payload
Gross machine weight (loaded)51,300 kgTotal, loaded74,110 kgTotal, loaded
Front axle load, empty14,060 kg19,180 kg
Centre axle load, empty4,730 kg7,100 kg
Rear axle load, empty4,510 kg6,830 kg
Front axle load, loaded17,310 kg25,060 kg
Centre axle load, loaded17,105 kg24,660 kg
Rear axle load, loaded16,885 kg24,390 kg

Body

Body capacity (SAE 2:1 heaped)17.6 m³25.5 m³
Body capacity (struck)13.9 m³19.9 m³
Body capacity with tailgate (SAE 2:1 heaped)18.8 m³27.3 m³
Body capacity with tailgate (struck)14.6 m³20.9 m³
Body plateHigh strength Brinell HB450 wear resistant steelHigh strength Brinell HB450 wear resistant steel
Body plate thickness, front7 mm7 mm
Body plate thickness, base13 mm14 mm
Body plate thickness, sides11 mm11 mm
Body raise time12 s12 s manual, 13 s automatic
Body lower time8 s10 s
Body plate thickness, chuteNot published14 mm

Engine

Engine modelCat C13ACat C18
EmissionsBrazil MAR-1 (equivalent to U.S. EPA Tier 3 / EU Stage IIIA) or non-certified (equivalent to Tier 2 / Stage II)Two engine optionsBrazil MAR-1 (equivalent to U.S. EPA Tier 3 / EU Stage IIIA) or non-certified (equivalent to Tier 2 / Stage II)Two engine options
Gross power280 kW (375 hp)SAE J1995, at 1,800 rpm381 kW (511 hp)SAE J1995, at 1,700 rpm
Net power274 kW (367 hp)SAE J1349370 kW (496 hp)SAE J1349
Engine power276 kW (370 hp)ISO 14396376 kW (504 hp)ISO 14396
Max torque2,141 NmGross, SAE J1995:2014, at 1,200 rpm2,618 NmGross, SAE J1995:2014, at 1,200 rpm
Max torque (net)2,107 NmSAE J1349:2011, at 1,200 rpm2,558 NmSAE J1349:2011, at 1,200 rpm
Displacement12.5 L18.1 L
Bore x stroke130 mm x 157 mm145 mm x 183 mm
No engine derating below3,810 mAltitude3,050 mAltitude

Transmission

TransmissionCat CX31 auto shift, 6F/1RCat CX38 auto shift, 9F/2R
Top speed55 km/hForward 654.8 km/hForward 9
Reverse speed9 km/hReverse 114.6 km/hReverse 2

Steering

Steering angle45°Left/right from centre45°Left/right from centre
SAE turning radius7.47 m8.625 m
Clearance radius8.075 m9.082 m
Inside radius3.879 m4.413 m
Aisle width5.332 m5.917 m
Lock to lock time4.75 s at 60 rpm4.8 s at 60 rpm

Tyres

TyresSix 23.5R25 radialSix 29.5 R25Turning dimensions are for 29.5 R25

Service capacities

Fuel tank400 L550 L
Cooling system83 L90 L
Hydraulic system, with tank123 LHydraulic system140 LSteering/hoist hydraulic system
Engine oil, with filter38 LEngine crankcase52 LEngine crankcase
Final drives/differential125 LNot published
Output transfer gearbox24 LNot published
Brake cooling tankNot published67 L
Transmission/output transfer gearNot published75 L
Final drives (each)Not published5 L
Axles (each)Not published60 L

Service intervals

Engine oil and filter500 hours500 hours
Fuel filters500 hoursprimary and secondary500 hoursprimary and secondary
Transmission oil filter500 hours500 hours
Transmission oil1,000 hours1,000 hoursincludes the output transfer gear
Output transfer gear oil1,000 hoursoil and filterNot published
Differential and final drive oil2,000 hoursfront, centre and rear axles2,000 hoursfront, centre and rear axles
Hydraulic oil4,000 hours4,000 hours
Coolant12,000 hours12,000 hours
Brake system oilNot published2,000 hours

Sources: Cat 730 (05A) Articulated Truck Technical Specifications AEXQ3916 (12-2025), Afr-ME / Aus-NZ / Eurasia / Indonesia / Pacific Islands / S Am · Cat 745 Articulated Truck Technical Specifications AEXQ3088-03 (06-2025), Afr-ME / Aus-NZ / Eurasia / S Am / Pacific Islands

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

0 m1 m2 m3 m4 m5 m6 m7 m8 m9 m10 m11 m
Cat 730Cat 745Same scale, front edges and ground lined up.

Cat 730 vs Cat 745: questions

Which is bigger, the Cat 730 or Cat 745?

By operating weight the Cat 745 is the biggest at 33.1 t, then the Cat 730 at 23.3 t.

Which has more power, the Cat 730 or Cat 745?

The Cat 745: Cat 730 280 kW (375 hp), Cat 745 381 kW (511 hp) (gross power), a 36% difference.

Which has the bigger bucket, the Cat 730 or Cat 745?

The Cat 745: Cat 730 17.6 m³, Cat 745 25.5 m³ (body capacity (sae 2:1 heaped)), a 45% difference.

Which lifts or carries more, the Cat 730 or Cat 745?

The Cat 745: Cat 730 28 t, Cat 745 41 t (payload (nominal)), a 46% difference.

Which has the bigger fuel tank, the Cat 730 or Cat 745?

The Cat 745: Cat 730 400 L, Cat 745 550 L (fuel tank), a 38% difference.

Which turns tighter, the Cat 730 or Cat 745?

The Cat 730: Cat 730 7.47 m, Cat 745 8.625 m (sae turning radius), a 13% difference.

Which is narrower to transport, the Cat 730 or Cat 745?

The Cat 730: Cat 730 3.676 m, Cat 745 3.801 m (overall width), a 3% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.

More comparisons

EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.