Cat 745

Current Cat 745 (Cat C18, Brazil MAR-1 / Tier 3-equivalent or non-certified engine, 29.5R25 tyres) per Cat technical specifications AEXQ3088-03 (Jun 2025) for Afr-ME / Eurasia / S Am - the build Al-Bahar sells in the UAE.

UAEUSAGlobal

Payload (nominal): 41 t
power: 370 kW (496 hp)
Operating weight: 33,110 kg
Body capacity (SAE 2:1 heaped): 25.5 m³

Side

Front

Overall length: 11.432 m
Overall length with tailgate: 11.559 m
Overall width: 3.801 m
Overall height (cab): 3.762 m
Loading height: 3.261 m
Dump height (body raised): 7.288 m
Ground clearance: 0.59 m
Ground clearance, body fully tipped: 0.779 m
Front axle to machine front: 3.418 m
Front axle to mid axle: 4.59 m
Tandem axle spacing: 1.966 m
Rear axle to body rear: 1.458 m
Body length: 6.402 m
Body length, inside: 5.929 m
Width over tailgate: 3.774 m
Body width: 3.422 m
Track width: 2.687 m
Width over fenders: 3.37 m
Max laden width over tyre bulge: 3.5 m

Weight

Operating weight (Total, empty): 33,110 kg
Payload (nominal) (Rated payload): 41 t
Gross machine weight (loaded) (Total, loaded): 74,110 kg
Front axle load, empty: 19,180 kg
Centre axle load, empty: 7,100 kg
Rear axle load, empty: 6,830 kg
Front axle load, loaded: 25,060 kg
Centre axle load, loaded: 24,660 kg
Rear axle load, loaded: 24,390 kg

Body

Body capacity (SAE 2:1 heaped): 25.5 m³
Body capacity (struck): 19.9 m³
Body capacity with tailgate (SAE 2:1 heaped): 27.3 m³
Body capacity with tailgate (struck): 20.9 m³
Body plate: High strength Brinell HB450 wear resistant steel
Body plate thickness, front: 7 mm
Body plate thickness, chute: 14 mm
Body plate thickness, sides: 11 mm
Body plate thickness, base: 14 mm
Body raise time: 12 s manual, 13 s automatic
Body lower time: 10 s

Engine

Engine model: Cat C18
Emissions (Two engine options): Brazil MAR-1 (equivalent to U.S. EPA Tier 3 / EU Stage IIIA) or non-certified (equivalent to Tier 2 / Stage II)
Gross power (SAE J1995, at 1,700 rpm): 381 kW (511 hp)
Net power (SAE J1349): 370 kW (496 hp)
Engine power (ISO 14396): 376 kW (504 hp)
Max torque (Gross, SAE J1995:2014, at 1,200 rpm): 2,618 Nm
Max torque (net) (SAE J1349:2011, at 1,200 rpm): 2,558 Nm
Displacement: 18.1 L
Bore x stroke: 145 mm x 183 mm
No engine derating below (Altitude): 3,050 m

Transmission

Transmission: Cat CX38 auto shift, 9F/2R
Top speed (Forward 9): 54.8 km/h
Reverse speed (Reverse 2): 14.6 km/h

Steering

Steer angle (Left/right from centre): 45°
SAE turning radius: 8.625 m
Clearance radius: 9.082 m
Inside radius: 4.413 m
Aisle width: 5.917 m
Lock to lock time: 4.8 s at 60 rpm

Tyres

Tyres (Turning dimensions are for 29.5 R25): Six 29.5 R25

Service capacities

Fuel tank: 550 L
Cooling system: 90 L
Brake cooling tank: 67 L
Hydraulic system, with tank (Steering/hoist hydraulic system): 140 L
Engine oil, with filter (Engine crankcase): 52 L
Transmission/output transfer gear: 75 L
Final drives (each): 5 L
Axles (each): 60 L

Service intervals

Engine oil and filter: 500 hours
Fuel filters (primary and secondary): 500 hours
Transmission oil filter: 500 hours
Transmission oil (includes the output transfer gear): 1,000 hours
Differential and final drive oil (front, centre and rear axles): 2,000 hours
Brake system oil: 2,000 hours
Hydraulic oil: 4,000 hours
Coolant: 12,000 hours