Bobcat T590 vs Kubota SVL75-3

The Kubota SVL75-3 is the heavier machine, at 4.27 t against 3.51 t, and the Kubota SVL75-3 has more power (54.6 kW against 49.2 kW).

The Bobcat T590 is ahead on: bigger fuel tank. The Kubota SVL75-3 is ahead on: more power, lifts or carries more, more digging or pushing force.

Below, every figure both makers publish sits side by side, with the Bobcat T590 and the Kubota SVL75-3 drawn to the same scale from their dimension drawings.

Bobcat · compact track loader
Bobcat T590
Change modelFull specs PDF
Kubota · compact track loader
Kubota SVL75-3
Change modelFull specs PDF
Add a modelUp to four

At a glance

Bold is the machine ahead on each figure, with its lead.

Figure	Bobcat T590	Kubota SVL75-3
Operating weight	3,513 kg	4,273 kg
Gross powerHigher is better	49.2 kW	55.4 kW+13%
Rated operating capacityHigher is better	992 kg	1,129 kg+14%
Lift breakout forceHigher is better	2,066 kgf	2,142 kgf+4%
Fuel tankHigher is better	138.2 L+46%	94.6 L
Length with standard bucket	3.378 m	3.609 m

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Differences only(61)

FigureBobcat T590 Kubota SVL75-3

Dimensions

Operating height3.901 mNot published

Height with operator cab1.972 mNot published

Angle of departure28°31°

Ground clearance0.188 m0.296 m

Ground contact length1.374 m1.436 m

Length without attachment2.657 m2.844 m

Length with standard bucket3.378 m3.609 m

Rollback at ground position30°Not published

Dump height with standard bucket2.319 mNot published

Height to bucket hinge pin3.023 mNot published

Dump reach at maximum height0.887 m1.007 m

Dump angle at maximum height42°Not published

Rollback fully raised at maximum height97°Not published

Width with standard bucket1.727 m1.717 m

Turning radius with standard bucket2.032 mNot published

Track gauge1.628 m320 mm tracks1.355 m

Width over tracks1.702 m320 mm tracksNot published

Height to top of cabNot published2.078 m

Hinge pin height (max lift)Not published3.117 mbucket hinge pin height at max lift

Weight

Operating weight3,513 kg4,273 kgclosed cab, including 75 kg operator

Shipping weight3,146 kgNot published

Performance

Rated operating capacity992 kgISO 14397-11,129 kg35% of tipping load

Tipping load2,834 kgISO 14397-13,226 kg

Lift breakout force2,066 kgfISO 14397-22,142 kgf

Tilt breakout force2,137 kgfISO 14397-2Not published

Push force2,944 kgfNot published

Ground pressure30 kPa5.9 psi standard track / 4.8 psi wide track

Top speed11.4 km/hstandardNot published

Top speed (two-speed option)16.7 km/hhigh rangeNot published

Breakout forceNot published2,808 kgfbucket

Travel speed (high)Not published13.7 km/h

Travel speed (low)Not published9 km/h

Traction forceNot published4,390 kgf

Engine

Engine modelKubota V2607-DI-TE3BKubota V3307-TE5A-CTL-Qturbocharged

EmissionsInterim Tier 4Not published

Cylinders44

Displacement2.6 L3.3 L3,331 cc; bore x stroke 94 x 120 mm

Gross power49.2 kW (66 hp)at 2,700 rpm55.4 kW (74.3 HP)SAE J1995, at 2,400 rpm

Max torque218 Nmat 1,425 rpm (SAE J1995 gross)Not published

Net powerNot published54.6 kW (73.2 HP)SAE J1349, at 2,400 rpm

Hydraulics

Pump flow65 L/minstandard flow, gear pumpNot published

Pump flow (high flow)101 L/minhigh-flow optionNot published

Max pressure23.8-24.5 MPasystem relief at quick couplersNot published

Auxiliary flowNot published73 L/minstandard; 112.8 L/min high flow

Auxiliary pressureNot published224 kgf/cm2

Undercarriage

Track width0.32 mrubber tracks0.32 mstandard; 0.40 m wide track

Track rollers (per side)Not published4

Service capacities

Fuel tank138.2 L94.6 L

Engine oil, with filter9.7 LNot published

Hydraulic tank7.6 Lhydraulic/hydrostatic reservoir16.1 L

Hydraulic system, with tank36 L46 L

Cooling system11.4 Lwithout heater; 11.7 L with heaterNot published

Drive motor, each0.345-0.375 Llater drive motors; earlier ones hold 60 mLNot published

Service intervals

Engine oil and filter250 hoursevery 100 h in severe conditionsNot published

Fuel filters250 hoursNot published

Hydraulic charge filter500 hoursNot published

Drive motor oil500 hoursNot published

Hydraulic/hydrostatic filter1,000 hoursNot published

Hydraulic oil1,000 hoursNot published

Dimensions (top view)

Overall widthNot published1.675 m

Turning radius (rear)Not published2.936 mfrom centre, machine rear

Loader angles

Rollback angle at carry positionNot published27°

Max dump angleNot published39°

Sources: Bobcat MEA T590 compact track loader specifications page · Kubota SVL75-3 brochure 8990C-01-AA (Kubota Australia, 2025-07)

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

Bobcat T590Kubota SVL75-3Same scale, front edges and ground lined up.

Bobcat T590 vs Kubota SVL75-3: questions

Which is bigger, the Bobcat T590 or Kubota SVL75-3?

By operating weight the Kubota SVL75-3 is the biggest at 4.27 t, then the Bobcat T590 at 3.51 t.

Which has more power, the Bobcat T590 or Kubota SVL75-3?

The Kubota SVL75-3: Bobcat T590 49.2 kW (66 hp), Kubota SVL75-3 55.4 kW (74.3 HP) (gross power), a 13% difference.

Which lifts or carries more, the Bobcat T590 or Kubota SVL75-3?

The Kubota SVL75-3: Bobcat T590 992 kg, Kubota SVL75-3 1,129 kg (rated operating capacity), a 14% difference.

Which has the bigger fuel tank, the Bobcat T590 or Kubota SVL75-3?

The Bobcat T590: Bobcat T590 138.2 L, Kubota SVL75-3 94.6 L (fuel tank), a 46% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.