Specification sheetIssued 4 November 2026
Bobcat · compact track loader
Bobcat T590
Bobcat Middle East & Africa T590 (Kubota V2607 Interim Tier 4 engine, 320 mm rubber tracks, standard bucket) from the Bobcat MEA product page; dimension letters from the drawing on the Bobcat EMEA spec sheet (2020-11-6, B4KV serials, Stage V build).
UAEGlobal
- Rated operating capacity
- 992 kg
- power
- 49.2 kW (66 hp)
- Operating weight
- 3,513 kg
- Operating height
- 3.901 m
- Height with operator cab
- 1.972 m
- Angle of departure
- 28°
- Ground clearance
- 0.188 m
- Ground contact length
- 1.374 m
- Length without attachment
- 2.657 m
- Length with standard bucket
- 3.378 m
- Rollback at ground position
- 30°
- Dump height with standard bucket
- 2.319 m
- Height to bucket hinge pin
- 3.023 m
- Dump reach at maximum height
- 0.887 m
- Dump angle at maximum height
- 42°
- Rollback fully raised at maximum height
- 97°
- Width with standard bucket
- 1.727 m
- Turning radius with standard bucket
- 2.032 m
- Track gauge
- 1.628 m
- Width over tracks
- 1.702 m
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
Weight
- Operating weight
- 3,513 kg
- Shipping weight
- 3,146 kg
Performance
- Rated operating capacity (ISO 14397-1)
- 992 kg
- Tipping load (ISO 14397-1)
- 2,834 kg
- Lift breakout force (ISO 14397-2)
- 2,066 kgf
- Tilt breakout force (ISO 14397-2)
- 2,137 kgf
- Push force
- 2,944 kgf
- Ground pressure
- 30 kPa
- Top speed (standard)
- 11.4 km/h
- Top speed (two-speed option) (high range)
- 16.7 km/h
Engine
- Engine model
- Kubota V2607-DI-TE3B
- Emissions
- Interim Tier 4
- Cylinders
- 4
- Displacement
- 2.6 L
- Gross power (at 2,700 rpm)
- 49.2 kW (66 hp)
- Max torque (at 1,425 rpm (SAE J1995 gross))
- 218 Nm
Hydraulics
- Pump flow (standard flow, gear pump)
- 65 L/min
- Pump flow (high flow) (high-flow option)
- 101 L/min
- Max pressure (system relief at quick couplers)
- 23.8-24.5 MPa
Undercarriage
- Track width (rubber tracks)
- 0.32 m
Service capacities
- Fuel tank
- 138.2 L
- Engine oil, with filter
- 9.7 L
- Hydraulic tank (hydraulic/hydrostatic reservoir)
- 7.6 L
- Hydraulic system, with tank
- 36 L
- Cooling system (without heater; 11.7 L with heater)
- 11.4 L
- Drive motor, each (later drive motors; earlier ones hold 60 mL)
- 0.345-0.375 L
Service intervals
- Engine oil and filter (every 100 h in severe conditions)
- 250 hours
- Fuel filter
- 250 hours
- Hydraulic charge filter
- 500 hours
- Drive motor oil
- 500 hours
- Hydraulic / hydrostatic filter
- 1,000 hours
- Hydraulic oil
- 1,000 hours