Specification sheetIssued 4 November 2026
Bobcat · compact track loader
Bobcat T590
Bobcat Middle East & Africa T590 (Kubota V2607 Interim Tier 4 engine, 320 mm rubber tracks, standard bucket) from the Bobcat MEA product page; dimension letters from the drawing on the Bobcat EMEA spec sheet (2020-11-6, B4KV serials, Stage V build).
UAEGlobal
- Rated operating capacity
- 2,187 lb
- power
- 66 hp
- Operating weight
- 7,745 lb
- Operating height
- 12.8 ft
- Height with operator cab
- 6.5 ft
- Angle of departure
- 28°
- Ground clearance
- 0.6 ft
- Ground contact length
- 4.5 ft
- Length without attachment
- 8.7 ft
- Length with standard bucket
- 11.1 ft
- Rollback at ground position
- 30°
- Dump height with standard bucket
- 7.6 ft
- Height to bucket hinge pin
- 9.9 ft
- Dump reach at maximum height
- 2.9 ft
- Dump angle at maximum height
- 42°
- Rollback fully raised at maximum height
- 97°
- Width with standard bucket
- 5.7 ft
- Turning radius with standard bucket
- 6.7 ft
- Track gauge
- 5.3 ft
- Width over tracks
- 5.6 ft
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
Weight
- Operating weight
- 7,745 lb
- Shipping weight
- 6,936 lb
Performance
- Rated operating capacity (ISO 14397-1)
- 2,187 lb
- Tipping load (ISO 14397-1)
- 6,248 lb
- Lift breakout force (ISO 14397-2)
- 4,555 lbf
- Tilt breakout force (ISO 14397-2)
- 4,711 lbf
- Push force
- 6,490 lbf
- Ground pressure
- 30 kPa
- Top speed (standard)
- 7.1 mph
- Top speed (two-speed option) (high range)
- 10.4 mph
Engine
- Engine model
- Kubota V2607-DI-TE3B
- Emissions
- Interim Tier 4
- Cylinders
- 4
- Displacement
- 0.7 US gal
- Gross power (at 2,700 rpm)
- 66 hp
- Max torque (at 1,425 rpm (SAE J1995 gross))
- 161.0 ft-lb
Hydraulics
- Pump flow (standard flow, gear pump)
- 17.1 US gpm
- Pump flow (high flow) (high-flow option)
- 26.7 US gpm
- Max pressure (system relief at quick couplers)
- 23.8-24.5 MPa
Undercarriage
- Track width (rubber tracks)
- 1 ft
Service capacities
- Fuel tank
- 36.5 US gal
- Engine oil, with filter
- 2.6 US gal
- Hydraulic tank (hydraulic/hydrostatic reservoir)
- 2 US gal
- Hydraulic system, with tank
- 9.5 US gal
- Cooling system (without heater; 11.7 L with heater)
- 3 US gal
- Drive motor, each (later drive motors; earlier ones hold 60 mL)
- 0.345-0.375 L
Service intervals
- Engine oil and filter (every 100 h in severe conditions)
- 250 hours
- Fuel filter
- 250 hours
- Hydraulic charge filter
- 500 hours
- Drive motor oil
- 500 hours
- Hydraulic / hydrostatic filter
- 1,000 hours
- Hydraulic oil
- 1,000 hours