EF Logo

Bobcat S450 vs Cat 226

The Cat 226 is the heavier machine, at 2.65 t against 2.24 t, and the Cat 226 has more power (49.1 kW against 35.9 kW).

The Bobcat S450 is ahead on: dumps higher, turns tighter, narrower to transport, lower to transport. The Cat 226 is ahead on: more power, reaches higher, lifts or carries more, more digging or pushing force, more hydraulic flow, bigger fuel tank, faster.

Below, every figure both makers publish sits side by side, with the Bobcat S450 and the Cat 226 drawn to the same scale from their dimension drawings.

  1. Bobcat · skid steer loader

    Bobcat S450

    Full specsPDF

  2. Cat · skid steer loader

    Cat 226

    Full specsPDF

  3. Add a model

At a glance

Bold is the machine ahead on each figure, with its lead.

FigureBobcat S450Cat 226
Operating weight2,240 kg2,653 kg
Gross powerHigher is better35.9 kW50.1 kW+40%
Dump height with standard bucketHigher is better2.157 m+4%2.077 m
Operating heightHigher is better3.559 m3.652 m+3%
Rated operating capacityHigher is better608 kg705 kg+16%
Tilt breakout forceHigher is better1,777 kgf1,781 kgf
Pump flowHigher is better63 L/min69 L/min+9%
Fuel tankHigher is better53.8 L57 L+6%
Top speedHigher is better11.4 km/h12.3 km/h+8%
Turning radius with standard bucketLower is better1.941 m+2%1.977 m
Width over tyresLower is better1.488 m+1%1.497 m
Height with operator cabLower is better1.976 m+3%2.028 m
Length with standard bucket3.173 m3.234 m

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Dimensions

Operating height3.559 m3.652 mmaximum overall height
Height with operator cab1.976 m2.028 mheight to top of cab
Angle of departure23°28°
Ground clearance0.213 m0.175 m
Wheelbase0.899 m1.054 m
Length without attachment2.502 m2.524 mwithout bucket
Length with standard bucket3.173 m3.234 mbucket on ground
Rollback at ground position26°Not published
Dump height with standard bucket2.157 m2.077 mclearance at maximum lift and dump
Height to bucket hinge pin2.781 m2.818 mat maximum lift
Dump reach at maximum height0.587 m0.533 mreach at maximum lift and dump
Dump angle at maximum height40°47°maximum dump angle
Rollback fully raised at maximum height91°89°rack back angle at maximum height
Width with standard bucket1.575 mNot published
Turning radius with standard bucket1.941 m1.977 mfrom centre to bucket
Tread width1.25 mstandard tyresNot published
Width over tyres1.488 mstandard tyres1.497 m
Bucket pin height at carry positionNot published0.215 m
Bumper overhang behind rear axleNot published0.894 m
Turning radius from centre, machine rearNot published1.513 m
Turning radius from centre, couplerNot published1.104 m
Maximum reach with arms parallel to groundNot published1.288 m
Bucket widthNot published1.576 m

Weight

Operating weight2,240 kg2,653 kg
Shipping weight2,010 kgNot published

Performance

Rated operating capacity608 kgISO 14397-1705 kg
Tipping load1,215 kgISO 14397-11,410 kg
Lift breakout force1,386 kgfISO 14397-2Not published
Tilt breakout force1,777 kgfISO 14397-21,781 kgftilt cylinder
Push force1,966 kgfNot published
Top speed11.4 km/hstandard12.3 km/hone speed, forward or reverse
Top speed (two-speed option)14.8 km/hhigh range; low range 10.5 km/h17.8 km/hforward or reverse
Rated operating capacity with optional counterweightNot published750 kg

Engine

Engine modelKubota V2403-MDI-E3Cat C2.2 CRDI
EmissionsInterim Tier 4U.S. EPA Tier 4 Final / EU Stage V
Cylinders4Not published
Displacement2.4 L2.2 L
Gross power35.9 kW (48 hp)50.1 kW (67.1 hp)SAE J1995
BoreNot published84 mm
StrokeNot published100 mm
Net powerNot published49.1 kW (65.8 hp)SAE 1349
Max torqueNot published208 Nmat 1,500 rpm (SAE J1995)

Hydraulics

Pump flow63 L/mingear pump69 L/minstandard flow, loader hydraulic flow
Max pressure22.4-23.1 MPasystem relief at quick couplers23 000 kPaloader hydraulic pressure, standard flow
Hydraulic powerNot published26.5 kW (35.5 hp)standard flow, calculated
Pump flow (high flow)Not published99 L/min
Max pressure (high flow)Not published23 000 kPahigh-flow option
Hydraulic power (high flow)Not published38 kW (50.9 hp)high-flow option, calculated

Tyres

Tyres10 x 16.5, 10-ply, heavy dutyCat 10 Ă— 16.5

Service capacities

Fuel tank53.8 L57 L
Engine oil, with filter8.7 L10 L
Hydraulic tank5.3 Lhydraulic/hydrostatic reservoir34 L
Hydraulic system, with tank21 L45 L
Cooling system9.5 Lwithout heater; 10.6 L with heater12 L
Chaincase21 Ltransmission chaincase reservoirNot published
Chain box, each sideNot published7 L

Service intervals

Engine oil and filter250 hours500 hours
Fuel filters250 hours500 hours
Hydraulic charge filter500 hourswith reservoir breather capNot published
Hydraulic/hydrostatic filter1,000 hoursNot published
Hydraulic oil1,000 hours3,000 hours
Chaincase oil1,000 hoursNot published
Coolantevery 24 monthsNot published
Air filter, primary and secondaryNot published500 hours
Hydraulic oil filterNot published1,000 hours
Drive chain oilNot published1,000 hours

Cab

ROPSNot publishedISO 3471:2008
FOPSNot publishedISO 3449:2005 Level I
Sound level, inside cabNot published83 dB(A)ISO 6396:2008
Sound level, outside cabNot published102 dB(A)2000/14/EC

Sources: Bobcat MEA S450 skid-steer loader specifications page · Cat 226D3 Skid Steer Loader spec sheet AEHQ8205-03 (07-2026), Am North / EU / APD / ANZP

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

0 m1 m2 m3 m
Bobcat S450Cat 226Same scale, front edges and ground lined up.

Bobcat S450 vs Cat 226: questions

Which is bigger, the Bobcat S450 or Cat 226?

By operating weight the Cat 226 is the biggest at 2.65 t, then the Bobcat S450 at 2.24 t.

Which has more power, the Bobcat S450 or Cat 226?

The Cat 226: Bobcat S450 35.9 kW (48 hp), Cat 226 50.1 kW (67.1 hp) (gross power), a 40% difference.

Which lifts or carries more, the Bobcat S450 or Cat 226?

The Cat 226: Bobcat S450 608 kg, Cat 226 705 kg (rated operating capacity), a 16% difference.

Which has the bigger fuel tank, the Bobcat S450 or Cat 226?

The Cat 226: Bobcat S450 53.8 L, Cat 226 57 L (fuel tank), a 6% difference.

Which turns tighter, the Bobcat S450 or Cat 226?

The Bobcat S450: Bobcat S450 1.941 m, Cat 226 1.977 m (turning radius with standard bucket), a 2% difference.

Which is narrower to transport, the Bobcat S450 or Cat 226?

The Bobcat S450: Bobcat S450 1.488 m, Cat 226 1.497 m (width over tyres), a 1% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.

More comparisons

EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.