Equipment Finders
Need equipment? Have equipment?
Buyers post one request and get quotes from verified suppliers. Suppliers list free and reach active demand.
Need equipment? Have equipment?
Buyers post one request and get quotes from verified suppliers. Suppliers list free and reach active demand.
No drilling machines or rigs are listed for sale in Abu Dhabi today. The category spans rotary piling rigs for foundation work on the city's towers, water-well rigs for farms around Al Ain and Al Dhafra, and geotechnical core drills. Rigs are specialist purchases and change hands infrequently.
Posting a purchase request puts the requirement in front of verified sellers across the UAE at no cost. The UAE drilling rigs page shows current national stock, the Dubai and Sharjah pages cover those emirates, and the Abu Dhabi buy hub lists the other plant for sale here.
A rig listing shows the type, maximum drilling depth and diameter, torque or pull-back, mast height, brand, year, hours and photographs, together with the seller's phone and WhatsApp. The buyer negotiates price, inspection and transport with the seller; Equipment Finders takes no commission and charges the buyer nothing.
Hydraulic rotary rigs on crawler bases drill large-diameter bored piles and secant walls for towers, bridges and marine structures. They are the heaviest machines in the category and move by low-bed with the mast lowered.
Smaller rotary and CFA rigs, and driven-pile hammers on crane or crawler bases, for the foundations of villas, warehouses and plant structures in KIZAD and Mussafah.
Truck- or trailer-mounted rigs with mud or air rotary drilling for agricultural and industrial wells in Al Ain, Liwa and the Al Dhafra farms. Depth capacity and the compressor or mud pump supplied are the main points of comparison.
Light skid and crawler rigs for geotechnical boreholes and rock coring ahead of design, plus concrete coring machines for cutting openings in slabs and walls. These are the most affordable rigs in the category.
Match the rig to the hardest ground on the job, not the average. Abu Dhabi's coastal sabkha and the limestone and gypsum beneath it call for different tooling from the harder rock near Al Ain, and a rig that is marginal on torque will struggle. Fix the depth and diameter needed, add a margin, then check mast height against the casing lengths to be handled.
No rigs are listed in the emirate today, so no asking price can be quoted. When sellers list, the price is shown on the listing where published and otherwise given on request; it depends on rig type, depth and torque rating, year, hours and what tooling, casing and drilling tools are included. Confirm VAT, low-bed transport and which tooling is included, since it can be a large part of the value.
Foundation rigs work on the city's islands and in KIZAD, water-well rigs in Al Ain and Al Dhafra, and geotechnical rigs wherever a project is at design stage, with Mussafah and ICAD as the usual yards between jobs. No seller is listed in any of these areas today. A request with the site location reaches rig owners across the UAE.
Post a request with the rig type, ground conditions, depth, diameter and budget, and sellers across the UAE reply directly at no charge.
No drilling rigs are listed for sale in Abu Dhabi today, so no price can be quoted for the emirate. When a rig is listed, the price appears where the seller publishes it and otherwise is quoted on request, set by type, depth and torque rating, year, hours and the tooling included. A posted request brings quotes from sellers across the UAE.
Bored piles for buildings and bridges need a hydraulic rotary rig sized to the pile diameter and depth; lighter foundations suit a smaller piling rig or driven-pile hammer; wells need a water-well rig with enough depth capacity and the right pump or compressor; investigation boreholes need a core drill. Match the rig to the hardest ground on site.
Used rigs are the common buy because the frames, masts and rotary heads are rebuildable and a well-kept machine has a long life. A used rig with documented hours, a sound mast and a serviced rotary head is sound value. New makes sense for a piling contractor with continuous work who needs warranty and dealer support.
Yes, through the seller's contact on the listing. Bring a driller or mechanic, check the mast for straightness and cracks, the rotary head for leaks and play, the crowd and winch systems, the tracks or truck chassis, and the hydraulic hoses. Ask to see the rig raise its mast and turn the head under load.
A sale invoice, a copy of the seller's trade licence and the rig's ownership or import papers are the usual documents, with the seller confirming what applies. A truck-mounted rig that is road-registered also needs its registration transferred by the seller. Check the serial number against the paperwork before payment and ask for the service records.
It varies by seller and is stated on the listing or agreed on contact. Some sellers include augers, buckets, core barrels, rods and casing; others sell the base machine alone. Ask for an itemised list, since tooling can add a great deal to the price and to the time before the rig can start work.