Hitachi ZW140-7 specs
- bucket capacity
- 2 m³
- net power
- 114 kW (153 hp)
- operating weight
- 11,840 kg
- static tipping load (full turn)
- 8,240 kg
Hitachi ZW140-7 dimensions
| Letter | Dimension | Metric and imperial |
|---|---|---|
| A | Overall length (bucket on ground) | 7.22 m23.7 ft |
| A' | Overall length (without bucket) | 6.235 m20.5 ft |
| B | Height to top of cab | 3.275 m10.7 ft |
| C | Width over tyres | 2.47 m8.1 ft |
| D | Wheelbase | 3 m9.8 ft |
| E | Ground clearance | 0.425 m1.4 ft |
| F | Tread width | 1.93 m6.3 ft |
| G | Bucket width | 2.48 m8.1 ft |
| H | Turning radius (centre of outside tyre) | 5.085 m16.7 ft |
| H' | Turning radius (inside of inside tyre) | 2.875 m9.4 ft |
| H'' | Turning radius (outside of bucket at carry) | 5.86 m19.2 ft |
| I | Overall operating height at full height | 5.015 m16.5 ft |
| J | Hinge pin height (carry) | 0.535 m1.8 ft |
| K | Hinge pin height (max lift) | 3.8 m12.5 ft |
| L | Lift arm clearance at full height | 3.55 m11.6 ft |
| M | Dump clearance at max lift | 2.865 m9.4 ft |
| N | Reach at max lift | 0.89 m2.9 ft |
| O | Digging depth | 0.04 m0.1 ft |
| P | Roll back at carry | 50°50° |
| P' | Roll back at ground | 42°42° |
| Q | Roll back angle at full height | 55°55° |
Hitachi ZW140-7 specifications
Hitachi ZW140-7 wheel loader, EU Stage V build (Cummins B4.5) from Hitachi Construction Machinery Australia's ZW140-7 / ZW160-7 brochure; standard arm, general-purpose bucket with bolt-on cutting edge (2.0 m³ heaped), 20.5R25 L3 tyres. Hitachi CMA is being renamed Landcros.
27 figures in 6 groups
Weight
- Operating weight
- 11,840 kg
Engine
- Engine model
- Cummins B4.5
- Emissions
- EU Stage V
- Cylinders
- 4
- Displacement
- 4.5 L
- Gross power
- 115 kW (154 hp)
- Net power
- 114 kW (153 hp)ISO 9249 at 2,200 rpm
- Max torque
- 712 NmGross at 1,200 rpm; net 704 Nm
Performance
- Bucket capacity
- 2 m³
- Static tipping load (straight)
- 9,490 kgISO 14397-1, 2.0 m³ bucket
- Static tipping load (full turn)
- 8,240 kg
- Breakout force
- 98 kN2.0 m³ bucket; 9,990 kgf
- Top speed
- 39 km/h4th gear, 20.5R25 tyres
- Travel speed, 1st
- 13 km/h
- Travel speed, 2nd
- 13 km/h
- Travel speed, 3rd
- 20 km/h
- Lift arm raise time
- 4.9 s
- Lift arm lower time
- 3.1 s
- Bucket dump time
- 1.2 s
- Total cycle time
- 9.2 s
Hydraulics
- Pump flow
- 194 L/minMain gear pump (also steering), at 2,200 rpm
- Max pressure
- 206 bar
- Brake, fan and pilot pump flow
- 45 L/min
Transmission
- Transmission
- 2-motor hydrostatic with summation gearbox, fixed-ratio powershift countershaft, 4 speeds
- Steering angle
- 40°Each direction, 80 degrees total
- Oscillation angle
- 20°Total (+10 / -10)
Tyres
- Tyres
- 20.5R25 (L3)
Source: Hitachi ZW140-7 / ZW160-7 brochure (Hitachi Construction Machinery Australia, Dec 2023)
Hitachi ZW140-7 service
What each system holds and when Hitachi says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.
Loading the 3D machine...
Drag to turn · scroll to zoom · built from the maker's drawing; markers show where each system is
- Engine oil
- 16 L
The 16-litre sump of the Cummins B4.5; check it at every start.
Confirm fluid grades in your machine's operator's manual: they vary by build year and climate.
Service capacities
- Fuel tank
- 205 L54.2 US gal
- Cooling system
- 20 L5.3 US gal
- Engine oil
- 16 L4.2 US gal
- Axle oil, front
- 24 L6.3 US gal
- Axle oil, rear
- 25 L6.6 US gal
- Hydraulic tank
- 80 L21.1 US gal
- DEF/AdBlue tank
- 25 L6.6 US gal
Compare the Hitachi ZW140-7
The machines nearest in size, each drawn beside this one at the same scale.
Moving a Hitachi ZW140-7
A first look from the sheet. Your haulier or forwarder confirms the load.
- Length
- 7.22m
- Width
- 2.47m
- Height
- 3.28m
- Weight
- 11.8t
- RoadA beavertail or flatbed truck
- SeaA 40 ft flat rack, out of gauge (over-width, over-height): expect a surcharge
Hitachi ZW140-7 prices and listings in the UAE
Asking prices on EquipmentsFinder, in AED, refreshed daily.
Typical hire, per daymedian of 18
AED 1,150 /day
No priced Hitachi ZW140-7 for hire yet: this is all wheel loaders
No Hitachi ZW140-7 for rent listed right now.
Request a Hitachi ZW140-7About the Hitachi ZW140-7
The Hitachi ZW140-7 is a 11.8-tonne wheel loader with a Cummins B4.5 engine rated at 114 kW (153 hp).
It carries a 2 m³ bucket, has a full-turn tipping load of 8,240 kg and dumps with 2.865 m clearance.
For transport it measures 7.22 m long and 2.47 m wide, and its tank holds 205 L of fuel.
A wheel loader: a big bucket on two lift arms at the front of an articulated, wheeled machine that loads, carries and stockpiles material.
Typical jobs: loading trucks from stockpiles, moving sand, aggregate and soil around site, feeding crushers and batching plants, clearing and backfilling.
Hitachi ZW140-7 questions
How much does a Hitachi ZW140-7 weigh?
11,840 kg (26,103 lb) in working order, with fuel, operator and standard attachment.
What engine and horsepower does the Hitachi ZW140-7 have?
A Cummins B4.5 engine rated at 114 kW (153 hp) net.
What bucket size does the Hitachi ZW140-7 have?
2 m³ (2.62 yd³), the bucket Hitachi quotes it with.
What is the Hitachi ZW140-7's tipping load?
8,240 kg (18,166 lb) at full turn: the safe load is about half of it.
What are the Hitachi ZW140-7's dimensions?
7.22 m long, 2.47 m wide and 3.27 m high, from Hitachi's dimension drawing.
How do you transport a Hitachi ZW140-7?
Road: a beavertail or flatbed truck. Sea: a 40 ft flat rack, out of gauge (over-width, over-height): expect a surcharge.
What is the Hitachi ZW140-7's fuel tank capacity?
205 L (54.2 US gal).
How much oil does a Hitachi ZW140-7 take?
Engine oil: 16 L (4.2 US gal). Hydraulic oil: 80 L (21.1 US gal).
What are the Hitachi ZW140-7's main competitors?
The machines nearest it in size are the Cat 930K, the SANY SW940L, the Volvo L90H. Each has a side-by-side comparison on EquipmentsFinder.
Is the Hitachi ZW140-7 sold in the UAE?
Not new through a Gulf dealer: it is sold in the USA and other markets worldwide. Used and imported machines do come up on EquipmentsFinder.
What is a Hitachi ZW140-7 used for?
A wheel loader: a big bucket on two lift arms at the front of an articulated, wheeled machine that loads, carries and stockpiles material. Typical jobs: loading trucks from stockpiles, moving sand, aggregate and soil around site, feeding crushers and batching plants, clearing and backfilling.
Need a Hitachi ZW140-7 on site?
Post the job - where, when and for how long. Suppliers with a machine contact you directly. Free to post.
