EF Logo

Cat 930K vs Cat 938K

The Cat 938K is the heavier machine, at 15.3 t against 13.1 t, and the Cat 938K has more power (136 kW against 116 kW).

The Cat 930K is ahead on: turns tighter, narrower to transport, lower to transport. The Cat 938K is ahead on: more power, more torque, dumps higher, reaches higher, bigger bucket or body, lifts or carries more, more digging or pushing force.

Below, every figure both makers publish sits side by side, with the Cat 930K and the Cat 938K drawn to the same scale from their dimension drawings.

  1. Cat · wheel loader

    Cat 930K

    Full specsPDF

  2. Cat · wheel loader

    Cat 938K

    Full specsPDF

  3. Add a model

At a glance

Bold is the machine ahead on each figure, with its lead.

FigureCat 930KCat 938K
Operating weight13,130 kg15,282 kg
Gross powerHigher is better119 kW140 kW+18%
Max torqueHigher is better787 Nm912 Nm+16%
Dump clearance at max liftHigher is better2.761 m2.822 m+2%
Hinge pin height (max lift)Higher is better3.907 m3.969 m+2%
Bucket capacityHigher is better2.5 m³2.7 m³+8%
Static tipping load (straight)Higher is better9,202 kg11,312 kg+23%
Breakout forceHigher is better11,488 kgf13,082 kgf+14%
Turning radius (outside of bucket)Lower is better5.961 m+3%6.127 m
Width over tyresLower is better2.54 m+6%2.693 m
Overall height, bucket at max liftLower is better5.239 m+1%5.301 m

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Dimensions

Height to top of cab3.34 mGround to cab3.34 mGround to cab
Height to top of beacon3.707 m3.707 m
Ground to axle centre0.685 m0.685 m
Ground clearance0.397 m0.386 m
Overall length (bucket on ground)7.613 m7.666 m
Rear axle to rear bumper1.993 m1.968 m
Hitch to front axle1.5 m1.525 m
Wheelbase3 m3.05 m
Dump clearance at max lift2.761 m2.822 m
Load-over height3.331 m3.354 m
Clearance, level bucket at max lift3.58 m3.642 m
Hinge pin height (max lift)3.907 m3.969 m
Overall height, bucket at max lift5.239 m5.301 m
Reach at max lift1.109 m1.146 m
Bucket pin height at carry0.41 m0.418 m
Dig depth0.1 m0.1 m
Bucket width2.55 m2.75 m
Tread width1.93 mTread centre2.083 mTread centre
Width over tyres2.54 m2.693 m
Turning radius (outside of bucket)5.961 m6.127 m
Turning radius (outside of tyres)5.402 m5.546 m
Turning radius (inside of tyres)2.851 m2.843 m

Angles

Rack-back angle at full lift54°54°
Dump angle at full lift48°49°
Rack-back angle at carry44°44°
Angle of departure33°33°
Articulation angle40°40°

Weight

Operating weight13,130 kg15,282 kg

Engine

Engine modelCat C7.1Cat C7.1
EmissionsU.S. EPA Tier 3 / EU Stage IIIA / Brazil MAR-1 equivalentU.S. EPA Tier 3 / EU Stage IIIA / Brazil MAR-1 equivalent
Displacement7 L7 L
Gross power119 kW (160 hp)140 kW (188 hp)
Gross power (Standard Mode)113 kW (152 hp)129 kW (173 hp)
Net power116 kW (156 hp)SAE J1349, Performance Mode at 1,800 rpm136 kW (182 hp)SAE J1349, Performance Mode at 1,800 rpm
Net power (Standard Mode)110 kW (148 hp)SAE J1349, Standard Mode at 1,600 rpm126 kW (169 hp)SAE J1349, Standard Mode at 1,600 rpm
Max torque787 NmGross, ISO 14396, Performance Mode912 Nm
Max torque (net)753 NmNet, SAE J1349, Performance Mode876 Nm

Performance

Bucket capacity2.5 m³2.7 m³
Bucket capacity range (general purpose)2.1-2.7 m³ (2.7-3.5 yd³)2.5-3.2 m³ (3.2-4.2 yd³)
Bucket capacity range (light material)3.1-5.0 m³ (4.0-6.5 yd³)3.1-5.0 m³ (4.0-6.5 yd³)
Static tipping load (straight)9,202 kgISO 14397-1; standard lift11,312 kgISO 14397-1; standard lift
Static tipping load (full turn)7,871 kgISO 14397-1; standard lift9,633 kgISO 14397-1; standard lift
Breakout force11,488 kgf13,082 kgf
Top speed40 km/hRange 4, forward and reverse40 km/hRange 4, forward and reverse

Hydraulics

Pump flow190 L/minImplement pump, maximum flow190 L/minImplement pump, maximum flow
Max pressure250 bar250 bar
Tilt cylinder relief pressure280 bar300 bar
Steering pump flow130 L/minMaximum flow130 L/minMaximum flow
Steering pump pressure241 bar241 bar

Transmission

TransmissionHydrostatic, 4 speed ranges, electronic controlHydrostatic, 4 speed ranges, electronic control
Range 113 km/h13 km/h
Range 213 km/h13 km/h
Range 327 km/h27 km/h
Range 440 km/h40 km/h

Tyres

Tyres20.5 R25 radial (L-3)20.5 R25 radial (L-3)

Service capacities

Fuel tank195 L195 L
Cooling system32 L32 L
Engine oil, with filter19.5 L19.5 L
Differentials and final drives, front26 L35 L
Differentials and final drives, rear25 L35 L
Hydraulic system, with tank165 L170 L
Hydraulic tank90 L90 L

Service intervals

Engine oil and filter500 hoursCat DEO-ULS500 hoursCat DEO-ULS
Fuel filters500 hoursPrimary and secondary500 hoursPrimary and secondary
Engine air filter1,000 hoursPrimary and secondary elements1,000 hoursPrimary and secondary elements
Hydraulic oil filter2,000 hours2,000 hours
Transmission oil and filter2,000 hoursCat TDTO2,000 hoursCat TDTO
Differential oil (front and rear)2,000 hours2,000 hours
Hydraulic oil6,000 hoursCat HYDO Advanced6,000 hoursCat HYDO Advanced
Coolant extender6,000 hoursCat ELC Extender6,000 hoursCat ELC Extender
Coolant12,000 hoursCat ELC12,000 hoursCat ELC

Sources: Cat 930K Wheel Loader specifications AEHQ7687-01 (04-2021) (AME, AUZ, CIS, LACD, Southeast Asia, Turkey) · Cat 938K Wheel Loader specifications AEHQ7682-01 (04-2021) (AME, AUZ, CIS, LACD, Southeast Asia, Turkey)

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

0 m1 m2 m3 m4 m5 m6 m7 m
Cat 930KCat 938KSame scale, front edges and ground lined up.

Cat 930K vs Cat 938K: questions

Which is bigger, the Cat 930K or Cat 938K?

By operating weight the Cat 938K is the biggest at 15.3 t, then the Cat 930K at 13.1 t.

Which has more power, the Cat 930K or Cat 938K?

The Cat 938K: Cat 930K 119 kW (160 hp), Cat 938K 140 kW (188 hp) (gross power), a 18% difference.

Which has the bigger bucket, the Cat 930K or Cat 938K?

The Cat 938K: Cat 930K 2.5 m³, Cat 938K 2.7 m³ (bucket capacity), a 8% difference.

Which lifts or carries more, the Cat 930K or Cat 938K?

The Cat 938K: Cat 930K 9,202 kg, Cat 938K 11,312 kg (static tipping load (straight)), a 23% difference.

Which turns tighter, the Cat 930K or Cat 938K?

The Cat 930K: Cat 930K 5.961 m, Cat 938K 6.127 m (turning radius (outside of bucket)), a 3% difference.

Which is narrower to transport, the Cat 930K or Cat 938K?

The Cat 930K: Cat 930K 2.54 m, Cat 938K 2.693 m (width over tyres), a 6% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.

More comparisons

EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.