EF Logo

Cat 730 vs Cat 740

The Cat 740 is the heavier machine, at 32.6 t against 23.3 t, and the Cat 740 has more power (324 kW against 274 kW).

The Cat 730 is ahead on: turns tighter, narrower to transport, lower to transport. The Cat 740 is ahead on: more power, more torque, dumps higher, bigger bucket or body, lifts or carries more, bigger fuel tank, faster.

Below, every figure both makers publish sits side by side, with the Cat 730 and the Cat 740 drawn to the same scale from their dimension drawings.

  1. Cat · articulated dump truck

    Cat 730

    Full specsPDF

  2. Cat · articulated dump truck

    Cat 740

    Full specsPDF

  3. Add a model

At a glance

Bold is the machine ahead on each figure, with its lead.

FigureCat 730Cat 740
Operating weight23,300 kg32,560 kg
Gross powerHigher is better280 kW335 kW+20%
Max torqueHigher is better2,141 Nm2,320 Nm+8%
Dump height (body raised)Higher is better6.46 m6.685 m+3%
Body capacity (SAE 2:1 heaped)Higher is better17.6 m³22.7 m³+29%
Payload (nominal)Higher is better28 t36.3 t+30%
Fuel tankHigher is better400 L550 L+38%
Top speedHigher is better55 km/h57.5 km/h+5%
SAE turning radiusLower is better7.47 m+3%7.698 m
Overall widthLower is better3.676 m+3%3.801 m
Overall height (cab)Lower is better3.498 m+7%3.757 m
Overall length10.445 m11.065 m

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Dimensions

Overall length10.445 m11.065 m
Overall length with tailgate10.593 m11.185 m
Overall width3.676 m3.801 m
Overall height (cab)3.498 m3.757 m
Loading height2.956 m3.243 m
Dump height (body raised)6.46 m6.685 m
Ground clearance0.537 m0.588 m
Ground clearance, body fully tipped0.549 m0.684 m
Front axle to machine front3.21 m3.418 m
Front axle to mid axle3.979 m4.126 m
Tandem axle spacing1.7 m1.966 m
Rear axle to body rear1.556 m1.542 m
Body length5.789 m5.889 m
Body length, inside5.432 m5.437 m
Width over tailgate2.984 m3.647 m
Body width2.902 m3.422 m
Track width2.275 m2.687 m
Width over tyres2.877 m3.37 m
Width over fenders2.95 m3.5 m
Max laden width over tyre bulge2.95 mNot published

Weight

Operating weight23,300 kgTotal, empty32,560 kgTotal, empty
Payload (nominal)28 tRated payload36.3 tRated payload
Gross machine weight (loaded)51,300 kgTotal, loaded68,860 kgTotal, loaded
Front axle load, empty14,060 kg19,095 kg
Centre axle load, empty4,730 kg6,785 kg
Rear axle load, empty4,510 kg6,680 kg
Front axle load, loaded17,310 kg22,271 kg
Centre axle load, loaded17,105 kg23,347 kg
Rear axle load, loaded16,885 kg23,242 kg

Body

Body capacity (SAE 2:1 heaped)17.6 m³22.7 m³
Body capacity (struck)13.9 m³17.7 m³
Body capacity with tailgate (SAE 2:1 heaped)18.8 m³24.4 m³
Body capacity with tailgate (struck)14.6 m³17.9 m³
Body plateHigh strength Brinell HB450 wear resistant steelHigh strength Brinell HB450 wear resistant steel
Body plate thickness, front7 mm7 mm
Body plate thickness, base13 mm13 mm
Body plate thickness, sides11 mm11 mm
Body raise time12 s12 s
Body lower time8 s12 s

Engine

Engine modelCat C13ACat C15
EmissionsBrazil MAR-1 (equivalent to U.S. EPA Tier 3 / EU Stage IIIA) or non-certified (equivalent to Tier 2 / Stage II)Two engine optionsBrazil MAR-1 (equivalent to U.S. EPA Tier 3 / EU Stage IIIA) or non-certified (equivalent to Tier 2 / Stage II)Two engine options
Gross power280 kW (375 hp)SAE J1995, at 1,800 rpm335 kW (449 hp)SAE J1995, at 1,700 rpm
Net power274 kW (367 hp)SAE J1349324 kW (434 hp)SAE J1349
Engine power276 kW (370 hp)ISO 14396330 kW (443 hp)ISO 14396
Max torque2,141 NmGross, SAE J1995:2014, at 1,200 rpm2,320 NmGross, SAE J1995:2014, at 1,200 rpm
Max torque (net)2,107 NmSAE J1349:2011, at 1,200 rpm2,264 NmSAE J1349:2011, at 1,200 rpm
Displacement12.5 L15.2 L
Bore x stroke130 mm x 157 mm137 mm x 171.5 mm
No engine derating below3,810 mAltitude3,050 mAltitude

Transmission

TransmissionCat CX31 auto shift, 6F/1RCat CX38 auto shift, 9F/2R
Top speed55 km/hForward 657.5 km/hForward 9
Reverse speed9 km/hReverse 115.7 km/hReverse 2

Steering

Steering angle45°Left/right from centre45°Left/right from centre
SAE turning radius7.47 m7.698 m
Clearance radius8.075 m8.395 m
Inside radius3.879 m3.96 m
Aisle width5.332 m5.595 m
Lock to lock time4.75 s at 60 rpm4.75 s at 60 rpm

Tyres

TyresSix 23.5R25 radialSix 29.5 R25Turning dimensions are for 29.5 R25

Service capacities

Fuel tank400 L550 L
Cooling system83 L90 L
Hydraulic system, with tank123 LHydraulic system140 LSteering/hoist hydraulic system
Engine oil, with filter38 LEngine crankcase52 LEngine crankcase
Final drives/differential125 LNot published
Output transfer gearbox24 LNot published
Brake cooling tankNot published67 L
Transmission/output transfer gearNot published75 L
Final drives (each)Not published5 L
Axles (each)Not published60 L

Service intervals

Engine oil and filter500 hours500 hours
Fuel filters500 hoursprimary and secondary500 hoursprimary and secondary
Transmission oil filter500 hours500 hours
Transmission oil1,000 hours1,000 hoursincludes the output transfer gear
Output transfer gear oil1,000 hoursoil and filterNot published
Differential and final drive oil2,000 hoursfront, centre and rear axles2,000 hoursfront, centre and rear axles
Hydraulic oil4,000 hours4,000 hours
Coolant12,000 hours12,000 hours
Brake system oilNot published2,000 hours

Sources: Cat 730 (05A) Articulated Truck Technical Specifications AEXQ3916 (12-2025), Afr-ME / Aus-NZ / Eurasia / Indonesia / Pacific Islands / S Am · Cat 740 GC Articulated Truck Technical Specifications AEXQ2606-03 (07-2025), Afr-ME / Aus-NZ / Eurasia / Indonesia / Pacific Islands / S Am - linked from Al-Bahar

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

0 m1 m2 m3 m4 m5 m6 m7 m8 m9 m10 m11 m
Cat 730Cat 740Same scale, front edges and ground lined up.

Cat 730 vs Cat 740: questions

Which is bigger, the Cat 730 or Cat 740?

By operating weight the Cat 740 is the biggest at 32.6 t, then the Cat 730 at 23.3 t.

Which has more power, the Cat 730 or Cat 740?

The Cat 740: Cat 730 280 kW (375 hp), Cat 740 335 kW (449 hp) (gross power), a 20% difference.

Which has the bigger bucket, the Cat 730 or Cat 740?

The Cat 740: Cat 730 17.6 m³, Cat 740 22.7 m³ (body capacity (sae 2:1 heaped)), a 29% difference.

Which lifts or carries more, the Cat 730 or Cat 740?

The Cat 740: Cat 730 28 t, Cat 740 36.3 t (payload (nominal)), a 30% difference.

Which has the bigger fuel tank, the Cat 730 or Cat 740?

The Cat 740: Cat 730 400 L, Cat 740 550 L (fuel tank), a 38% difference.

Which turns tighter, the Cat 730 or Cat 740?

The Cat 730: Cat 730 7.47 m, Cat 740 7.698 m (sae turning radius), a 3% difference.

Which is narrower to transport, the Cat 730 or Cat 740?

The Cat 730: Cat 730 3.676 m, Cat 740 3.801 m (overall width), a 3% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.

More comparisons

EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.