EF Logo

Bobcat T590 vs John Deere 333G

The John Deere 333G is the heavier machine, at 6.36 t against 3.51 t, and the John Deere 333G has more power (72 kW against 49.2 kW).

The Bobcat T590 is ahead on: bigger fuel tank, narrower to transport. The John Deere 333G is ahead on: more power, more torque, dumps higher, lifts or carries more, more digging or pushing force, more hydraulic flow, faster.

Below, every figure both makers publish sits side by side, with the Bobcat T590 and the John Deere 333G drawn to the same scale from their dimension drawings.

  1. Bobcat · compact track loader

    Bobcat T590

    Full specsPDF

  2. John Deere · compact track loader

    John Deere 333G

    Full specsPDF

  3. Add a model

At a glance

Bold is the machine ahead on each figure, with its lead.

FigureBobcat T590John Deere 333G
Operating weight3,513 kg6,356 kg
Gross powerHigher is better49.2 kW74.6 kW+52%
Max torqueHigher is better218 Nm395 Nm+81%
Dump height with standard bucketHigher is better2.319 m2.69 m+16%
Rated operating capacityHigher is better992 kg1,848 kg+86%
Lift breakout forceHigher is better2,066 kgf3,746 kgf+81%
Pump flowHigher is better65 L/min95 L/min+47%
Fuel tankHigher is better138.2 L+21%114 L
Top speedHigher is better11.4 km/h12.6 km/h+11%
Width over tracksLower is better1.702 m+17%2.05 m

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Dimensions

Operating height3.901 mNot published
Height with operator cab1.972 mNot published
Angle of departure28°31°
Ground clearance0.188 m0.24 m
Ground contact length1.374 mNot published
Length without attachment2.657 m3.1 m
Length with standard bucket3.378 mNot published
Rollback at ground position30°Not published
Dump height with standard bucket2.319 m2.69 mfoundry bucket
Height to bucket hinge pin3.023 m3.35 m
Dump reach at maximum height0.887 mNot published
Dump angle at maximum height42°Not published
Rollback fully raised at maximum height97°Not published
Width with standard bucket1.727 mNot published
Turning radius with standard bucket2.032 mNot published
Track gauge1.628 m320 mm tracksNot published
Width over tracks1.702 m320 mm tracks2.05 m
Overall lengthNot published3.71 m
Overall heightNot published2.3 m
Dump reachNot published0.71 m
Front turn radiusNot published2.18 m
Dump angle at full heightNot published48°full lift height
Bucket rollbackNot published35°ground level

Weight

Operating weight3,513 kg6,356 kg
Shipping weight3,146 kgNot published

Performance

Rated operating capacity992 kgISO 14397-11,848 kgSAE, 35% of tipping load
Tipping load2,834 kgISO 14397-15,280 kg
Lift breakout force2,066 kgfISO 14397-23,746 kgf
Tilt breakout force2,137 kgfISO 14397-2Not published
Push force2,944 kgfNot published
Ground pressure30 kPa34.1 kPa (5.0 psi) with 450 mm tracks; 38.4 kPa (5.6 psi) with 400 mm tracks
Top speed11.4 km/hstandard12.6 km/h2-speed, high
Top speed (two-speed option)16.7 km/hhigh rangeNot published
Rated operating capacity (50% tipping load)Not published2,640 kg
Breakout forceNot published6,243 kgf
Travel speed (low)Not published8.5 km/h
Traction forceNot published5,221 kgftractive effort

Engine

Engine modelKubota V2607-DI-TE3BYanmar 4TNV94FHTturbocharged, intercooled
EmissionsInterim Tier 4EPA Final Tier 4 / EU Stage IV
Cylinders44
Displacement2.6 L3.1 L
Gross power49.2 kW (66 hp)at 2,700 rpm74.6 kW (100 hp)ISO 14396 at 2,500 rpm
Max torque218 Nmat 1,425 rpm (SAE J1995 gross)395 Nmat 1,700 rpm
Net powerNot published72 kW (96.6 hp)SAE J1349 / ISO 9249 peak, at 2,500 rpm

Hydraulics

Pump flow65 L/minstandard flow, gear pump95 L/minstandard
Pump flow (high flow)101 L/minhigh-flow option156 L/mintotal with high-flow option
Max pressure23.8-24.5 MPasystem relief at quick couplers23,787 kPa (3,450 psi)at couplers

Undercarriage

Track width0.32 mrubber tracks0.45 mstandard on 333G; 400 mm optional
Track rollers (per side)Not published5 triple-flange all-steel

Service capacities

Fuel tank138.2 L114 L
Engine oil, with filter9.7 LNot published
Hydraulic tank7.6 Lhydraulic/hydrostatic reservoirNot published
Hydraulic system, with tank36 LNot published
Cooling system11.4 Lwithout heater; 11.7 L with heaterNot published
Drive motor, each0.345-0.375 Llater drive motors; earlier ones hold 60 mLNot published

Service intervals

Engine oil and filter250 hoursevery 100 h in severe conditionsNot published
Fuel filters250 hoursNot published
Hydraulic charge filter500 hoursNot published
Drive motor oil500 hoursNot published
Hydraulic/hydrostatic filter1,000 hoursNot published
Hydraulic oil1,000 hoursNot published

Dozer blade (SmartGrade)

Blade widthNot published2.44 m
Blade heightNot published0.74 m
Maximum blade angleNot published24°plus/minus
Overall width with blade angledNot published2.258 m
Blade tiltNot published8°plus/minus
Length with dozer blade installedNot published3.94 m

Sources: Bobcat MEA T590 compact track loader specifications page · John Deere G-Series Compact Track Loaders 325G / 331G / 333G brochure DKAGCTLL (07-21)

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

0 m1 m2 m3 m
Bobcat T590John Deere 333GSame scale, front edges and ground lined up.

Bobcat T590 vs John Deere 333G: questions

Which is bigger, the Bobcat T590 or John Deere 333G?

By operating weight the John Deere 333G is the biggest at 6.36 t, then the Bobcat T590 at 3.51 t.

Which has more power, the Bobcat T590 or John Deere 333G?

The John Deere 333G: Bobcat T590 49.2 kW (66 hp), John Deere 333G 74.6 kW (100 hp) (gross power), a 52% difference.

Which lifts or carries more, the Bobcat T590 or John Deere 333G?

The John Deere 333G: Bobcat T590 992 kg, John Deere 333G 1,848 kg (rated operating capacity), a 86% difference.

Which has the bigger fuel tank, the Bobcat T590 or John Deere 333G?

The Bobcat T590: Bobcat T590 138.2 L, John Deere 333G 114 L (fuel tank), a 21% difference.

Which is narrower to transport, the Bobcat T590 or John Deere 333G?

The Bobcat T590: Bobcat T590 1.702 m, John Deere 333G 2.05 m (width over tracks), a 17% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.

More comparisons

EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.