EF Logo

Bobcat T590 vs Cat 253

The Cat 253 is the heavier machine, at 4.24 t against 3.51 t, and the Cat 253 has more power (53.5 kW against 49.2 kW).

The Bobcat T590 is ahead on: dumps higher, lifts or carries more, bigger fuel tank, narrower to transport. The Cat 253 is ahead on: more power, more torque, more hydraulic flow, faster.

Below, every figure both makers publish sits side by side, with the Bobcat T590 and the Cat 253 drawn to the same scale from their dimension drawings.

  1. Bobcat · compact track loader

    Bobcat T590

    Full specsPDF

  2. Cat · compact track loader

    Cat 253

    Full specsPDF

  3. Add a model

At a glance

Bold is the machine ahead on each figure, with its lead.

FigureBobcat T590Cat 253
Operating weight3,513 kg4,238 kg
Gross powerHigher is better49.2 kW53.8 kW+9%
Max torqueHigher is better218 Nm265 Nm+22%
Dump height with standard bucketHigher is better2.319 m2.313 m
Rated operating capacityHigher is better992 kg+9%912 kg
Pump flowHigher is better65 L/min76 L/min+17%
Fuel tankHigher is better138.2 L+47%94 L
Top speedHigher is better11.4 km/h13.7 km/h+20%
Width over tracksLower is better1.702 m+3%1.76 m

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Dimensions

Operating height3.901 mNot published
Height with operator cab1.972 mNot published
Angle of departure28°35°
Ground clearance0.188 mNot published
Ground contact length1.374 mNot published
Length without attachment2.657 mNot published
Length with standard bucket3.378 mNot published
Rollback at ground position30°Not published
Dump height with standard bucket2.319 m2.313 mClearance at maximum lift and dump
Height to bucket hinge pin3.023 m3.066 mMax lift; carry position 0.19 m
Dump reach at maximum height0.887 m0.586 m
Dump angle at maximum height42°Not published
Rollback fully raised at maximum height97°Not published
Width with standard bucket1.727 mNot published
Turning radius with standard bucket2.032 mNot published
Track gauge1.628 m320 mm tracksNot published
Width over tracks1.702 m320 mm tracks1.76 mVehicle width, 380 mm tracks
Overall lengthNot published3.415 m
Overall heightNot published2.098 mTop of cab; max overall height 3.84 m
Maximum reach, arms parallel to groundNot published1.275 m
Ground clearance (minimum)Not published0.218 m
Length, track on groundNot published1.485 m
Overall length, trackNot published1.94 m
Maximum dump angleNot published52°

Weight

Operating weight3,513 kg4,238 kg
Shipping weight3,146 kgNot published

Performance

Rated operating capacity992 kgISO 14397-1912 kg
Tipping load2,834 kgISO 14397-12,606 kg
Lift breakout force2,066 kgfISO 14397-2Not published
Tilt breakout force2,137 kgfISO 14397-2Not published
Push force2,944 kgfNot published
Ground pressure30 kPa36.8kPa
Top speed11.4 km/hstandard13.7 km/hTwo-speed; 9.5 km/h one-speed
Top speed (two-speed option)16.7 km/hhigh rangeNot published
Breakout force, lift cylinderNot published2,097 kgf
Breakout force, tilt cylinderNot published2,451 kgf

Engine

Engine modelKubota V2607-DI-TE3BCat C3.3B DIT (turbo)
EmissionsInterim Tier 4Not published
Cylinders4Not published
Displacement2.6 L3.3 L
Gross power49.2 kW (66 hp)at 2,700 rpm53.8 kW (72.1 hp)SAE J1995:2014
Max torque218 Nmat 1,425 rpm (SAE J1995 gross)265 NmAt 1,500 rpm, SAE J1995
Net powerNot published53.5 kW (71.7 hp)ISO 9249; SAE J1349 53 kW
Engine oilNot published11 LCrankcase

Hydraulics

Pump flow65 L/minstandard flow, gear pump76 L/minStandard flow, 30 gpm / 112 L/min high flow
Pump flow (high flow)101 L/minhigh-flow optionNot published
Max pressure23.8-24.5 MPasystem relief at quick couplers230 barLoader hydraulic pressure 23,000 kPa

Undercarriage

Track width0.32 mrubber tracksNot published

Service capacities

Fuel tank138.2 L94 L
Engine oil, with filter9.7 LNot published
Hydraulic tank7.6 Lhydraulic/hydrostatic reservoir39 L
Hydraulic system, with tank36 L50 L
Cooling system11.4 Lwithout heater; 11.7 L with heater14 L
Drive motor, each0.345-0.375 Llater drive motors; earlier ones hold 60 mLNot published

Service intervals

Engine oil and filter250 hoursevery 100 h in severe conditionsNot published
Fuel filters250 hoursNot published
Hydraulic charge filter500 hoursNot published
Drive motor oil500 hoursNot published
Hydraulic/hydrostatic filter1,000 hoursNot published
Hydraulic oil1,000 hoursNot published

Sources: Bobcat MEA T590 compact track loader specifications page · Cat 253 Compact Track Loader specifications, cat.com

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

0 m1 m2 m3 m
Bobcat T590Cat 253Same scale, front edges and ground lined up.

Bobcat T590 vs Cat 253: questions

Which is bigger, the Bobcat T590 or Cat 253?

By operating weight the Cat 253 is the biggest at 4.24 t, then the Bobcat T590 at 3.51 t.

Which has more power, the Bobcat T590 or Cat 253?

The Cat 253: Bobcat T590 49.2 kW (66 hp), Cat 253 53.8 kW (72.1 hp) (gross power), a 9% difference.

Which lifts or carries more, the Bobcat T590 or Cat 253?

The Bobcat T590: Bobcat T590 992 kg, Cat 253 912 kg (rated operating capacity), a 9% difference.

Which has the bigger fuel tank, the Bobcat T590 or Cat 253?

The Bobcat T590: Bobcat T590 138.2 L, Cat 253 94 L (fuel tank), a 47% difference.

Which is narrower to transport, the Bobcat T590 or Cat 253?

The Bobcat T590: Bobcat T590 1.702 m, Cat 253 1.76 m (width over tracks), a 3% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.

More comparisons

EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.