EF Logo

Bobcat T190 vs John Deere 333G

The John Deere 333G is the heavier machine, at 6.36 t against 3.45 t, and the John Deere 333G has more power (72 kW against 45.5 kW).

The Bobcat T190 is ahead on: narrower to transport. The John Deere 333G is ahead on: more power, more torque, dumps higher, lifts or carries more, more hydraulic flow, bigger fuel tank, faster.

Below, every figure both makers publish sits side by side, with the Bobcat T190 and the John Deere 333G drawn to the same scale from their dimension drawings.

  1. Bobcat · compact track loader

    Bobcat T190

    Full specsPDF

  2. John Deere · compact track loader

    John Deere 333G

    Full specsPDF

  3. Add a model

At a glance

Bold is the machine ahead on each figure, with its lead.

FigureBobcat T190John Deere 333G
Operating weight3,453 kg6,356 kg
Net powerHigher is better45.5 kW72 kW+58%
Max torqueHigher is better235 Nm395 Nm+68%
Dump height with standard bucketHigher is better2.31 m2.69 m+16%
Rated operating capacityHigher is better1,088 kg1,848 kg+70%
Pump flowHigher is better62 L/min95 L/min+54%
Fuel tankHigher is better106 L114 L+8%
Top speedHigher is better11.4 km/h12.6 km/h+11%
Width over tracksLower is better1.676 m+18%2.05 m

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Dimensions

Operating height3.862 mNot published
Height with operator cab1.938 mNot published
Angle of departure30°31°
Ground clearance0.205 m0.24 m
Ground contact length1.401 mNot published
Length without attachment2.588 m3.1 m
Length with standard bucket3.309 mNot published
Rollback at ground position25°Not published
Dump height with standard bucket2.31 m2.69 mfoundry bucket
Height to bucket hinge pin3.002 m3.35 m
Dump reach at maximum height0.784 mNot published
Dump angle at maximum height42°Not published
Rollback fully raised at maximum height95°Not published
Bucket width1.727 mNot published
Turning radius with standard bucket2.001 mNot published
Track width (gauge)1.356 m320 mm tracksNot published
Width over tracks1.676 m320 mm tracks2.05 m
Overall lengthNot published3.71 m
Overall heightNot published2.3 m
Dump reachNot published0.71 m
Front turn radiusNot published2.18 m
Dump angle at full heightNot published48°full lift height
Bucket rollbackNot published35°ground level

Performance

Rated operating capacity1,088 kgNo more than 35% of tipping load1,848 kgSAE, 35% of tipping load
Tipping load3,108 kgISO 14397-15,280 kg
Lift breakout force21 kN3,746 kgf
Tilt breakout force20 kNNot published
Top speed11.4 km/h12.6 km/h2-speed, high
Raise lift arms3.7 sFunction timeNot published
Lower lift arms2.4 sFunction timeNot published
Ground pressure33.8 kPa34.1 kPa (5.0 psi) with 450 mm tracks; 38.4 kPa (5.6 psi) with 400 mm tracks
Rated operating capacity (50% tipping load)Not published2,640 kg
Breakout forceNot published6,243 kgf
Travel speed (low)Not published8.5 km/h
Traction forceNot published5,221 kgftractive effort

Weight

Operating weight3,453 kgT190; 3,473 kg T190H6,356 kg
Shipping weight3,081 kgNot published

Engine

Engine modelKubota V2403M-DI-TE2B-BC-IYanmar 4TNV94FHTturbocharged, intercooled
Cylinders44
Displacement2.4 L3.1 L
Net power45.5 kW (61 hp)72 kW (96.6 hp)SAE J1349 / ISO 9249 peak, at 2,500 rpm
Max torque235 NmGross, SAE J1995, at 1,475 rpm395 Nmat 1,700 rpm
EmissionsNot publishedEPA Final Tier 4 / EU Stage IV
Gross powerNot published74.6 kW (100 hp)ISO 14396 at 2,500 rpm

Hydraulics

Pump flow62 L/minT190, at 3,028 rpm; gear pump95 L/minstandard
Pump flow (high flow)96 L/minT190H156 L/mintotal with high-flow option
Max pressure22.4 - 23.1 MPaSystem relief at quick couplers23,787 kPa (3,450 psi)at couplers

Service capacities

Fuel tank106 L114 L
Engine oil, with filter8.7 LNot published
Cooling system11.3 LWith heater; 10.2 L withoutNot published
Hydraulic tank72.4 LNot published
Hydraulic system, with tank34.1 LNot published

Service intervals

Engine oil and filter250 hoursFirst change at 50 hNot published
Fuel filters250 hoursNot published
Hydraulic/hydrostatic filter500 hoursNot published
Hydraulic oil1,000 hoursNot published
Case drain filters1,000 hoursNot published
Hydrostatic motor carrier oil1,000 hoursAlso each time a track is replacedNot published
Pivot pins grease10 hoursLift arms, cylinders and Bob-Tach pinsNot published

Dozer blade (SmartGrade)

Blade widthNot published2.44 m
Blade heightNot published0.74 m
Maximum blade angleNot published24°plus/minus
Overall width with blade angledNot published2.258 m
Blade tiltNot published8°plus/minus
Length with dozer blade installedNot published3.94 m

Undercarriage

Track widthNot published0.45 mstandard on 333G; 400 mm optional
Track rollers (per side)Not published5 triple-flange all-steel

Sources: Bobcat T190 Compact Track Loader Operation & Maintenance Manual 6904144-EN (09-06), Bobcat Europe, S/N 531711001 & above - Loader Specifications (manual pp.121-124), dealer-site copy · John Deere G-Series Compact Track Loaders 325G / 331G / 333G brochure DKAGCTLL (07-21)

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

0 m1 m2 m3 m
Bobcat T190John Deere 333GSame scale, front edges and ground lined up.

Bobcat T190 vs John Deere 333G: questions

Which is bigger, the Bobcat T190 or John Deere 333G?

By operating weight the John Deere 333G is the biggest at 6.36 t, then the Bobcat T190 at 3.45 t.

Which has more power, the Bobcat T190 or John Deere 333G?

The John Deere 333G: Bobcat T190 45.5 kW (61 hp), John Deere 333G 72 kW (96.6 hp) (net power), a 58% difference.

Which lifts or carries more, the Bobcat T190 or John Deere 333G?

The John Deere 333G: Bobcat T190 1,088 kg, John Deere 333G 1,848 kg (rated operating capacity), a 70% difference.

Which has the bigger fuel tank, the Bobcat T190 or John Deere 333G?

The John Deere 333G: Bobcat T190 106 L, John Deere 333G 114 L (fuel tank), a 8% difference.

Which is narrower to transport, the Bobcat T190 or John Deere 333G?

The Bobcat T190: Bobcat T190 1.676 m, John Deere 333G 2.05 m (width over tracks), a 18% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.

More comparisons

EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.