Specification sheetIssued 4 November 2026
Bobcat · compact track loader
Bobcat T190
Bobcat T190 compact track loader (Kubota V2403 engine, 320 mm rubber tracks, standard bucket) from the Bobcat Europe Operation & Maintenance Manual 6904144-EN (09-06), S/N 531711001 and above, 'Loader Specifications' pages; the T190 is discontinued, and a dealer-site copy of Bobcat's own manual is the only maker source found. Dimension letters are those printed in the manual.
USAGlobal
- Rated operating capacity
- 1,088 kg
- power
- 45.5 kW (61 hp)
- Operating weight
- 3,453 kg
- Operating height
- 3.862 m
- Height with operator cab
- 1.938 m
- Angle of departure
- 30°
- Ground clearance
- 0.205 m
- Ground contact length
- 1.401 m
- Length without attachment
- 2.588 m
- Length with standard bucket
- 3.309 m
- Rollback at ground position
- 25°
- Dump height with standard bucket
- 2.31 m
- Height to bucket hinge pin
- 3.002 m
- Dump reach at maximum height
- 0.784 m
- Dump angle at maximum height
- 42°
- Rollback fully raised at maximum height
- 95°
- Bucket width
- 1.727 m
- Turning radius with standard bucket
- 2.001 m
- Track width (gauge)
- 1.356 m
- Width over tracks
- 1.676 m
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
Performance
- Rated operating capacity (No more than 35% of tipping load)
- 1,088 kg
- Tipping load (ISO 14397-1)
- 3,108 kg
- Lift breakout force
- 21 kN
- Tilt breakout force
- 20 kN
- Top speed
- 11.4 km/h
- Raise lift arms (Function time)
- 3.7 s
- Lower lift arms (Function time)
- 2.4 s
- Ground pressure
- 33.8 kPa
Weight
- Operating weight (T190; 3,473 kg T190H)
- 3,453 kg
- Shipping weight
- 3,081 kg
Engine
- Engine model
- Kubota V2403M-DI-TE2B-BC-I
- Cylinders
- 4
- Displacement
- 2.4 L
- Net power
- 45.5 kW (61 hp)
- Max torque (Gross, SAE J1995, at 1,475 rpm)
- 235 Nm
Hydraulics
- Pump flow (T190, at 3,028 rpm; gear pump)
- 62 L/min
- Pump flow (high flow) (T190H)
- 96 L/min
- Max pressure (System relief at quick couplers)
- 22.4 - 23.1 MPa
Service capacities
- Fuel tank
- 106 L
- Engine oil, with filter
- 8.7 L
- Cooling system (With heater; 10.2 L without)
- 11.3 L
- Hydraulic tank
- 72.4 L
- Hydraulic system, with tank
- 34.1 L
Service intervals
- Engine oil and filter (First change at 50 h)
- 250 hours
- Fuel filter
- 250 hours
- Hydraulic / hydrostatic filter
- 500 hours
- Hydraulic oil
- 1,000 hours
- Case drain filters
- 1,000 hours
- Hydrostatic motor carrier oil (Also each time a track is replaced)
- 1,000 hours
- Pivot pins grease (Lift arms, cylinders and Bob-Tach pins)
- 10 hours