Specification sheetIssued 4 November 2026
Bobcat · compact track loader
Bobcat T190
Bobcat T190 compact track loader (Kubota V2403 engine, 320 mm rubber tracks, standard bucket) from the Bobcat Europe Operation & Maintenance Manual 6904144-EN (09-06), S/N 531711001 and above, 'Loader Specifications' pages; the T190 is discontinued, and a dealer-site copy of Bobcat's own manual is the only maker source found. Dimension letters are those printed in the manual.
USAGlobal
- Rated operating capacity
- 2,399 lb
- power
- 61 hp
- Operating weight
- 7,613 lb
- Operating height
- 12.7 ft
- Height with operator cab
- 6.4 ft
- Angle of departure
- 30°
- Ground clearance
- 0.7 ft
- Ground contact length
- 4.6 ft
- Length without attachment
- 8.5 ft
- Length with standard bucket
- 10.9 ft
- Rollback at ground position
- 25°
- Dump height with standard bucket
- 7.6 ft
- Height to bucket hinge pin
- 9.8 ft
- Dump reach at maximum height
- 2.6 ft
- Dump angle at maximum height
- 42°
- Rollback fully raised at maximum height
- 95°
- Bucket width
- 5.7 ft
- Turning radius with standard bucket
- 6.6 ft
- Track width (gauge)
- 4.4 ft
- Width over tracks
- 5.5 ft
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
Performance
- Rated operating capacity (No more than 35% of tipping load)
- 2,399 lb
- Tipping load (ISO 14397-1)
- 6,852 lb
- Lift breakout force
- 4,700 lbf
- Tilt breakout force
- 4,449 lbf
- Top speed
- 7.1 mph
- Raise lift arms (Function time)
- 3.7 s
- Lower lift arms (Function time)
- 2.4 s
- Ground pressure
- 33.8 kPa
Weight
- Operating weight (T190; 3,473 kg T190H)
- 7,613 lb
- Shipping weight
- 6,792 lb
Engine
- Engine model
- Kubota V2403M-DI-TE2B-BC-I
- Cylinders
- 4
- Displacement
- 0.6 US gal
- Net power
- 61 hp
- Max torque (Gross, SAE J1995, at 1,475 rpm)
- 173 lbf·ft
Hydraulics
- Pump flow (T190, at 3,028 rpm; gear pump)
- 16.3 US gpm
- Pump flow (high flow) (T190H)
- 25.5 US gpm
- Max pressure (System relief at quick couplers)
- 22.4 - 23.1 MPa
Service capacities
- Fuel tank
- 28 US gal
- Engine oil, with filter
- 2.3 US gal
- Cooling system (With heater; 10.2 L without)
- 3 US gal
- Hydraulic tank
- 19.1 US gal
- Hydraulic system, with tank
- 9 US gal
Service intervals
- Engine oil and filter (First change at 50 h)
- 250 hours
- Fuel filter
- 250 hours
- Hydraulic / hydrostatic filter
- 500 hours
- Hydraulic oil
- 1,000 hours
- Case drain filters
- 1,000 hours
- Hydrostatic motor carrier oil (Also each time a track is replaced)
- 1,000 hours
- Pivot pins grease (Lift arms, cylinders and Bob-Tach pins)
- 10 hours