EF Logo

Bobcat T190 vs Cat 253

The Cat 253 is the heavier machine, at 4.24 t against 3.45 t, and the Cat 253 has more power (53.5 kW against 45.5 kW).

The Bobcat T190 is ahead on: lifts or carries more, bigger fuel tank, narrower to transport. The Cat 253 is ahead on: more power, more torque, dumps higher, more hydraulic flow, faster.

Below, every figure both makers publish sits side by side, with the Bobcat T190 and the Cat 253 drawn to the same scale from their dimension drawings.

  1. Bobcat · compact track loader

    Bobcat T190

    Full specsPDF

  2. Cat · compact track loader

    Cat 253

    Full specsPDF

  3. Add a model

At a glance

Bold is the machine ahead on each figure, with its lead.

FigureBobcat T190Cat 253
Operating weight3,453 kg4,238 kg
Net powerHigher is better45.5 kW53.5 kW+18%
Max torqueHigher is better235 Nm265 Nm+13%
Dump height with standard bucketHigher is better2.31 m2.313 m
Rated operating capacityHigher is better1,088 kg+19%912 kg
Pump flowHigher is better62 L/min76 L/min+23%
Fuel tankHigher is better106 L+13%94 L
Top speedHigher is better11.4 km/h13.7 km/h+20%
Width over tracksLower is better1.676 m+5%1.76 m

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Dimensions

Operating height3.862 mNot published
Height with operator cab1.938 mNot published
Angle of departure30°35°
Ground clearance0.205 mNot published
Ground contact length1.401 mNot published
Length without attachment2.588 mNot published
Length with standard bucket3.309 mNot published
Rollback at ground position25°Not published
Dump height with standard bucket2.31 m2.313 mClearance at maximum lift and dump
Height to bucket hinge pin3.002 m3.066 mMax lift; carry position 0.19 m
Dump reach at maximum height0.784 m0.586 m
Dump angle at maximum height42°Not published
Rollback fully raised at maximum height95°Not published
Bucket width1.727 mNot published
Turning radius with standard bucket2.001 mNot published
Track width (gauge)1.356 m320 mm tracksNot published
Width over tracks1.676 m320 mm tracks1.76 mVehicle width, 380 mm tracks
Overall lengthNot published3.415 m
Overall heightNot published2.098 mTop of cab; max overall height 3.84 m
Maximum reach, arms parallel to groundNot published1.275 m
Ground clearance (minimum)Not published0.218 m
Length, track on groundNot published1.485 m
Overall length, trackNot published1.94 m
Maximum dump angleNot published52°

Performance

Rated operating capacity1,088 kgNo more than 35% of tipping load912 kg
Tipping load3,108 kgISO 14397-12,606 kg
Lift breakout force21 kNNot published
Tilt breakout force20 kNNot published
Top speed11.4 km/h13.7 km/hTwo-speed; 9.5 km/h one-speed
Raise lift arms3.7 sFunction timeNot published
Lower lift arms2.4 sFunction timeNot published
Ground pressure33.8 kPa36.8kPa
Breakout force, lift cylinderNot published2,097 kgf
Breakout force, tilt cylinderNot published2,451 kgf

Weight

Operating weight3,453 kgT190; 3,473 kg T190H4,238 kg
Shipping weight3,081 kgNot published

Engine

Engine modelKubota V2403M-DI-TE2B-BC-ICat C3.3B DIT (turbo)
Cylinders4Not published
Displacement2.4 L3.3 L
Net power45.5 kW (61 hp)53.5 kW (71.7 hp)ISO 9249; SAE J1349 53 kW
Max torque235 NmGross, SAE J1995, at 1,475 rpm265 NmAt 1,500 rpm, SAE J1995
Gross powerNot published53.8 kW (72.1 hp)SAE J1995:2014
Engine oilNot published11 LCrankcase

Hydraulics

Pump flow62 L/minT190, at 3,028 rpm; gear pump76 L/minStandard flow, 30 gpm / 112 L/min high flow
Pump flow (high flow)96 L/minT190HNot published
Max pressure22.4 - 23.1 MPaSystem relief at quick couplers230 barLoader hydraulic pressure 23,000 kPa

Service capacities

Fuel tank106 L94 L
Engine oil, with filter8.7 LNot published
Cooling system11.3 LWith heater; 10.2 L without14 L
Hydraulic tank72.4 L39 L
Hydraulic system, with tank34.1 L50 L

Service intervals

Engine oil and filter250 hoursFirst change at 50 hNot published
Fuel filters250 hoursNot published
Hydraulic/hydrostatic filter500 hoursNot published
Hydraulic oil1,000 hoursNot published
Case drain filters1,000 hoursNot published
Hydrostatic motor carrier oil1,000 hoursAlso each time a track is replacedNot published
Pivot pins grease10 hoursLift arms, cylinders and Bob-Tach pinsNot published

Sources: Bobcat T190 Compact Track Loader Operation & Maintenance Manual 6904144-EN (09-06), Bobcat Europe, S/N 531711001 & above - Loader Specifications (manual pp.121-124), dealer-site copy · Cat 253 Compact Track Loader specifications, cat.com

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

0 m1 m2 m3 m
Bobcat T190Cat 253Same scale, front edges and ground lined up.

Bobcat T190 vs Cat 253: questions

Which is bigger, the Bobcat T190 or Cat 253?

By operating weight the Cat 253 is the biggest at 4.24 t, then the Bobcat T190 at 3.45 t.

Which has more power, the Bobcat T190 or Cat 253?

The Cat 253: Bobcat T190 45.5 kW (61 hp), Cat 253 53.5 kW (71.7 hp) (net power), a 18% difference.

Which lifts or carries more, the Bobcat T190 or Cat 253?

The Bobcat T190: Bobcat T190 1,088 kg, Cat 253 912 kg (rated operating capacity), a 19% difference.

Which has the bigger fuel tank, the Bobcat T190 or Cat 253?

The Bobcat T190: Bobcat T190 106 L, Cat 253 94 L (fuel tank), a 13% difference.

Which is narrower to transport, the Bobcat T190 or Cat 253?

The Bobcat T190: Bobcat T190 1.676 m, Cat 253 1.76 m (width over tracks), a 5% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.

More comparisons

EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.