EF Logo

Bobcat S130 vs Cat 226

The Cat 226 is the heavier machine, at 2.65 t against 2.47 t, and the Cat 226 has more power (49.1 kW against 34.3 kW).

The Bobcat S130 is ahead on: dumps higher, turns tighter, narrower to transport, lower to transport. The Cat 226 is ahead on: more power, more torque, reaches higher, lifts or carries more, more hydraulic flow, bigger fuel tank, faster.

Below, every figure both makers publish sits side by side, with the Bobcat S130 and the Cat 226 drawn to the same scale from their dimension drawings.

  1. Bobcat · skid steer loader

    Bobcat S130

    Full specsPDF

  2. Cat · skid steer loader

    Cat 226

    Full specsPDF

  3. Add a model

At a glance

Bold is the machine ahead on each figure, with its lead.

FigureBobcat S130Cat 226
Operating weight2,465 kg2,653 kg
Gross powerHigher is better34.3 kW50.1 kW+46%
Max torqueHigher is better150 Nm208 Nm+39%
Dump height with standard bucketHigher is better2.1 m+1%2.077 m
Operating heightHigher is better3.543 m3.652 m+3%
Rated operating capacityHigher is better590 kg705 kg+19%
Pump flowHigher is better64 L/min69 L/min+8%
Fuel tankHigher is better50.3 L57 L+13%
Top speedHigher is better11.8 km/h12.3 km/h+4%
Turning radius with standard bucketLower is better1.745 m+12%1.977 m
Width over tyresLower is better1.49 m1.497 m
Height with operator cabLower is better1.964 m+3%2.028 m
Length with standard bucket3.152 m3.234 m

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Dimensions

Operating height3.543 m3.652 mmaximum overall height
Height with operator cab1.964 m2.028 mheight to top of cab
Angle of departure23°28°
Ground clearance0.188 m0.175 m
Wheelbase0.9 m1.054 m
Length without attachment2.432 m2.524 mwithout bucket
Length with standard bucket3.152 m3.234 mbucket on ground
Rollback at ground position25°Not published
Dump height with standard bucket2.1 m2.077 mclearance at maximum lift and dump
Height to bucket hinge pin2.781 m2.818 mat maximum lift
Dump reach at maximum height0.575 m0.533 mreach at maximum lift and dump
Bucket width1.575 m1.576 m
Turning radius with standard bucket1.745 m1.977 mfrom centre to bucket
Tread width1.247 mNot published
Width over tyres1.49 m1.497 m
Bucket pin height at carry positionNot published0.215 m
Bumper overhang behind rear axleNot published0.894 m
Dump angle at maximum heightNot published47°maximum dump angle
Turning radius from centre, machine rearNot published1.513 m
Turning radius from centre, couplerNot published1.104 m
Maximum reach with arms parallel to groundNot published1.288 m
Rollback fully raised at maximum heightNot published89°rack back angle at maximum height

Performance

Rated operating capacity590 kg705 kg
Tipping load1,195 kg1,410 kg
Top speed11.8 km/h12.3 km/hone speed, forward or reverse
Rated operating capacity with optional counterweightNot published750 kg
Tilt breakout forceNot published1,781 kgftilt cylinder
Top speed (two-speed option)Not published17.8 km/hforward or reverse

Weight

Operating weight2,465 kg2,653 kg
Shipping weight2,128 kgNot published

Engine

Engine modelKubota V2203-M-DI-E2B-BC-3Cat C2.2 CRDI
Cylinders4Not published
Displacement2.2 L2.2 L
Gross power34.3 kW (46 hp)at 2,800 rpm50.1 kW (67.1 hp)SAE J1995
Max torque150 Nmat 1,700 rpm208 Nmat 1,500 rpm (SAE J1995)
EmissionsNot publishedU.S. EPA Tier 4 Final / EU Stage V
BoreNot published84 mm
StrokeNot published100 mm
Net powerNot published49.1 kW (65.8 hp)SAE 1349

Hydraulics, drive and tyres

Pump flow64 L/min69 L/minstandard flow, loader hydraulic flow
Max pressure224 to 231 bar23 000 kPaloader hydraulic pressure, standard flow
DriveTandem hydrostatic piston pumps, two motorsNot published
Tyres10 x 16.5, 10-ply heavy dutyCat 10 × 16.5
Fuel tank50.3 L57 L

Hydraulics

Hydraulic powerNot published26.5 kW (35.5 hp)standard flow, calculated
Pump flow (high flow)Not published99 L/min
Max pressure (high flow)Not published23 000 kPahigh-flow option
Hydraulic power (high flow)Not published38 kW (50.9 hp)high-flow option, calculated

Service capacities

Engine oil, with filterNot published10 L
Hydraulic tankNot published34 L
Hydraulic system, with tankNot published45 L
Cooling systemNot published12 L
Chain box, each sideNot published7 L

Cab

ROPSNot publishedISO 3471:2008
FOPSNot publishedISO 3449:2005 Level I
Sound level, inside cabNot published83 dB(A)ISO 6396:2008
Sound level, outside cabNot published102 dB(A)2000/14/EC

Service intervals

Engine oil and filterNot published500 hours
Air filter, primary and secondaryNot published500 hours
Fuel filtersNot published500 hours
Hydraulic oil filterNot published1,000 hours
Drive chain oilNot published1,000 hours
Hydraulic oilNot published3,000 hours

Sources: Bobcat S130 spec sheet B-4473680-FR, 03-12 · Cat 226D3 Skid Steer Loader spec sheet AEHQ8205-03 (07-2026), Am North / EU / APD / ANZP

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

0 m1 m2 m3 m
Bobcat S130Cat 226Same scale, front edges and ground lined up.

Bobcat S130 vs Cat 226: questions

Which is bigger, the Bobcat S130 or Cat 226?

By operating weight the Cat 226 is the biggest at 2.65 t, then the Bobcat S130 at 2.47 t.

Which has more power, the Bobcat S130 or Cat 226?

The Cat 226: Bobcat S130 34.3 kW (46 hp), Cat 226 50.1 kW (67.1 hp) (gross power), a 46% difference.

Which lifts or carries more, the Bobcat S130 or Cat 226?

The Cat 226: Bobcat S130 590 kg, Cat 226 705 kg (rated operating capacity), a 19% difference.

Which has the bigger fuel tank, the Bobcat S130 or Cat 226?

The Cat 226: Bobcat S130 50.3 L, Cat 226 57 L (fuel tank), a 13% difference.

Which turns tighter, the Bobcat S130 or Cat 226?

The Bobcat S130: Bobcat S130 1.745 m, Cat 226 1.977 m (turning radius with standard bucket), a 12% difference.

Which is narrower to transport, the Bobcat S130 or Cat 226?

The Bobcat S130: Bobcat S130 1.49 m, Cat 226 1.497 m (width over tyres), a 0% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.

More comparisons

EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.