Cat 236 specs
- rated operating capacity
- 825 kg
- net power
- 48.4 kW (64.9 hp)
- operating weight
- 2,972 kg
Cat 236 dimensions
| Letter | Dimension | Metric and imperial |
|---|---|---|
| 1 | Wheelbase | 1.105 m43.5 in |
| 2 | Length without attachment | 2.767 m108.9 in |
| 3 | Length with standard bucket | 3.487 m137.3 in |
| 4 | Height with operator cab | 2.082 m82.0 in |
| 5 | Operating height | 3.977 m156.6 in |
| 6 | Height to bucket hinge pin | 3.122 m122.9 in |
| 7 | Bucket pin height at carry position | 0.19 m7.5 in |
| 8 | Dump reach at maximum height | 0.408 m16.0 in |
| 9 | Dump height with standard bucket | 2.359 m92.9 in |
| 10 | Ground clearance | 0.195 m7.7 in |
| 11 | Angle of departure | 26°26° |
| 12 | Bumper overhang behind rear axle | 1.021 m40.2 in |
| 13 | Dump angle at maximum height | 48°48° |
| 14 | Width over tyres | 1.676 m66.0 in |
| 15 | Turning radius from centre, machine rear | 1.639 m64.5 in |
| 16 | Turning radius from centre, coupler | 1.314 m51.8 in |
| 17 | Turning radius with standard bucket | 2.107 m83.0 in |
| 18 | Maximum reach with arms parallel to ground | 1.353 m53.3 in |
| 19 | Rollback fully raised at maximum height | 91°91° |
Cat 236 specifications
Cat 236D3 (current D3 series) for the Africa-Middle East region (Cat C2.2 engine, standard-flow hydraulics) from spec sheet AEHQ8218-03 (05-2025) for S Am, AME, Eurasia and APD-LRC, the sheet linked by Al-Bahar (UAE); the North American/EU Tier 4 Final 236D3 has the larger Cat C3.3B engine and differs.
24 figures in 7 groups
Dimensions
- Standard bucket width
- 1.73 m
Weight
- Operating weight
- 2,972 kg
Performance
- Rated operating capacity
- 825 kg
- Rated operating capacity with optional counterweight
- 915 kg
- Tipping load
- 1,650 kg
- Tilt breakout force
- 2,269 kgftilt cylinder
- Top speed
- 12.1 km/hone speed, forward or reverse
- Top speed (two-speed option)
- 18.3 km/hforward or reverse
Engine
- Engine model
- Cat C2.2
- Displacement
- 2.2 L
- Bore
- 84 mm
- Stroke
- 100 mm
- Gross power
- 49.2 kW (65.9 hp)SAE J1995
- Net power
- 48.4 kW (64.9 hp)SAE 1349
- Net power
- 48.9 kW (65.6 hp)ISO 9249
- Max torque
- 200 Nmat 1,800 rpm (SAE J1995)
Hydraulics
- Pump flow
- 76 L/minstandard flow, loader hydraulic flow
- Max pressure
- 23 000 kPaloader hydraulic pressure, standard flow
- Hydraulic power
- 29 kW (39 hp)standard flow, calculated
Tyres
- Tyres
- Cat 10 × 16.5
Cab
- ROPS
- ISO 3471:2008
- FOPS
- ISO 3449:2005 Level I
- Sound level, inside cab
- 83 dB(A)ISO 6396:2008
- Sound level, outside cab
- 101 dB(A)2000/14/EC
Source: Cat 236D3 Skid Steer Loader spec sheet AEHQ8218-03 (05-2025), S Am / AME / Eurasia / APD-LRC
Cat 236 service
What each system holds and when Cat says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.
Loading the 3D machine...
Drag to turn · scroll to zoom · built from the maker's drawing; markers show where each system is
- Engine crankcase
- 10 L
- Engine oil and filter, change every
- 500 hours
Fluid: Cat DEO-ULS (Cat D3 Series Skid Steer, Compact Track and Multi Terrain Loader Parts Reference Guide AEXQ (planned maintenance table))
Dipstick, filler and filter are behind the rear door, at ground level.
The 236D3's engine sits behind the cab with the hydrostatic pumps driven off it; dusty, worn-out oil wears both, so change it on the 500 hours, not late.
Confirm fluid grades in your machine's operator's manual: they vary by build year and climate.
Service capacities
- Fuel tank
- 87 L19.1 gal
- Engine crankcase
- 10 L2.2 gal
- Hydraulic tank
- 39 L10.3 gal
- Hydraulic system, with tank
- 50 L13.2 gal
- Cooling system
- 12 L2.6 gal
- Chain box, each side
- 8.8 L2.3 gal
Service intervals
- Engine oil and filter
- 500 hours
- Air filter, primary and secondary
- 500 hours
- Fuel filters
- 500 hours
- Hydraulic oil filter
- 1,000 hours
- Drive chain oil
- 1,000 hours
- Hydraulic oil
- 3,000 hours
Compare the Cat 236
The machines nearest in size, each drawn beside this one at the same scale.
Moving a Cat 236
A first look from the sheet. Your haulier or forwarder confirms the load.
- Length
- 3.49m
- Width
- 1.68m
- Height
- 2.08m
- Weight
- 3t
- RoadA plant trailer behind a pickup
- SeaFits a 20 ft flat rack, in gauge
Cat 236 prices and listings in the UAE
Asking prices on EquipmentsFinder, in AED, refreshed daily.
Typical hire, per daymedian of 8
AED 425 /day
No priced Cat 236 for hire yet: this is all skid steer loaders
No Cat 236 for rent listed right now.
Request a Cat 236About the Cat 236
The Cat 236 is a 2.97-tonne skid steer loader with a Cat C2.2 engine rated at 48.4 kW (64.9 hp).
It is rated for 825 kg.
For transport it measures 3.487 m long and 1.676 m wide, and its tank holds 87 L of fuel.
A skid steer loader: a compact loader that turns on the spot, small enough for tight sites and quick to switch between attachments.
Typical jobs: site clean-up and moving material, loading small trucks, landscaping and grading, forks, augers, sweepers and breakers.
Cat 236 questions
How much does a Cat 236 weigh?
2,972 kg (6,552 lb) in working order, with fuel, operator and standard attachment.
What engine and horsepower does the Cat 236 have?
A Cat C2.2 engine rated at 48.4 kW (64.9 hp) net.
How much can a Cat 236 lift?
Its rated operating capacity is 825 kg (1,820 lb).
What are the Cat 236's dimensions?
3.49 m long, 1.68 m wide and 2.08 m high, from Cat's dimension drawing.
How do you transport a Cat 236?
Road: a plant trailer behind a pickup. Sea: fits a 20 ft flat rack, in gauge.
What is the Cat 236's fuel tank capacity?
87 L (19.1 gal).
How much oil does a Cat 236 take?
Engine oil: 500 hours. Hydraulic oil: 50 L (13.2 gal).
How often does a Cat 236 need an oil change?
Cat sets the engine oil and filter at every 500 hours; in hot, dusty work, check the operator's manual for a shorter interval.
What are the Cat 236's main competitors?
The machines nearest it in size are the Bobcat S570, the Bobcat S590, the Bobcat S185. Each has a side-by-side comparison on EquipmentsFinder.
Is the Cat 236 sold in the UAE?
Yes. The Cat 236 is sold in the UAE and the Gulf, the USA, other markets worldwide; builds can differ by market, so check emissions and options with the dealer.
What is a Cat 236 used for?
A skid steer loader: a compact loader that turns on the spot, small enough for tight sites and quick to switch between attachments. Typical jobs: site clean-up and moving material, loading small trucks, landscaping and grading, forks, augers, sweepers and breakers.
Need a Cat 236 on site?
Post the job - where, when and for how long. Suppliers with a machine contact you directly. Free to post.
