EquipmentsFinder
Need equipment? Have equipment?
Buyers post one request and get quotes from verified suppliers. Suppliers list free and reach active demand.
Need equipment? Have equipment?
Buyers post one request and get quotes from verified suppliers. Suppliers list free and reach active demand.
20 listings available
Dubai
Dubai
Dubai
Dubai
Dubai
Dubai
Dubai
Dubai
Dubai
Dubai
Dubai
Dubai
20 attachments are listed for hire in Dubai today, all from a single supplier that is not yet verified. For a contractor in Al Quoz or Jebel Ali who needs a breaker for a week or a second bucket for a trench, that is a short list worth checking first, and the listing gives a direct phone and WhatsApp number.
Attachments for hire across every emirate are on the UAE attachment page.
EquipmentsFinder is a marketplace. The supplier owns the attachments and agrees the hire, delivery and return with the renter. Renters pay EquipmentsFinder nothing and no commission is added.
An attachment hire is only as good as the match with the carrier, so have the machine's make, model, operating weight, coupler type and auxiliary hydraulic flow ready before calling. The supplier can then say yes or no in one conversation.
Trenching, ditching, rock and general-purpose buckets change what a machine can do in an afternoon. A narrower bucket cuts a service trench; a wider one loads faster on bulk work. Suppliers hire extra buckets when a job moves from digging to backfilling.
A breaker turns an excavator or skid steer into a demolition tool for concrete slabs, rock and old asphalt. It is the attachment most often hired alone, because it is needed for days rather than months. Match its size to the carrier: too heavy strains the boom, too light is slow.
Hydraulic augers drill holes for piles, posts, signs and trees, with bits in several diameters. A skid steer with an auger is a common sight on landscaping and boundary-wall jobs in Dubai Investments Park and similar plots.
Pallet forks let a loader move blocks, pipes and palletised stock around a yard. Grapples pick up timber, scrap and demolition waste, and a rotating grapple helps sort and load it.
An excavator-mounted compaction plate compacts trench backfill in layers without anyone going into the trench, which is useful for utility reinstatement where a walk-behind plate is slow or unsafe.
Three checks decide a fit: the mounting, the hydraulics and the weight. The pin spacing or quick coupler must match, since adapters add cost and time. The auxiliary circuit must give the flow and pressure the attachment needs, because an undersized circuit makes a breaker slow and hot.
Weight counts most on excavators: a heavy tool at full reach cuts lifting capacity and stability. Quote the carrier's model number and the supplier can confirm its weight range, which is easier than reading a specification plate on site.
None of the 20 attachments carries a published rate, so the price comes with the supplier's quote. Expect breakers and large augers to cost more than buckets and forks, and weekly or monthly hire to come in lower per day.
Find out who pays for delivery, wear parts like breaker tools, teeth and cutting edges, and VAT. A supplier may insist on supplying the carrier machine as well, so raise that in the first call.
All 20 listings come from one supplier in Dubai city. Attachments are small and travel on a pickup or with the carrier, so delivery to Al Qusais, Ras Al Khor or the Jebel Ali area is usually quick and cheap.
Browse the Dubai hub for the excavators, skid steers and loaders that carry these tools.
See the Abu Dhabi attachment page for stock based in the capital.
The Sharjah attachment page shows attachments hired from that emirate.
Send a request with the site location; a Dubai or Sharjah supplier can price delivery to the north.
A posted request that names the attachment, the carrier model and the dates draws quotes from suppliers. The machines that carry attachments are in the equipment rental hub.
None of the Dubai listings publishes a rate, so the price comes from the supplier's quote. It rises with the size of the tool and falls per day with a longer hire. Ask about delivery, wear parts and VAT so the quotes can be compared on the same basis.
Send the supplier the carrier's make, model, weight, coupler and auxiliary hydraulic flow and pressure. Those details let the supplier say whether the attachment will bolt on and run properly. An adapter plate can cure a pin mismatch, but not a hydraulic one.
Often yes, since the listings are for attachments alone. A supplier may prefer to hire an attachment only with one of its own machines to control wear and compatibility, so ask when you request the quote and be ready to give the carrier details.
Yes. A day is enough for many breaking or boring tasks, and that is how breakers and augers are often hired. Delivery is charged once whatever the length of hire, so when the work spills over a few days a weekly rate is worth requesting.
The supplier is based in Dubai city and delivers across the emirate. Attachments are light to move, so delivery outside Dubai is often possible for a transport charge. State where the machine is working and the supplier will quote delivery to that address.