EquipmentsFinder
Need equipment? Have equipment?
Buyers post one request and get quotes from verified suppliers. Suppliers list free and reach active demand.
Need equipment? Have equipment?
Buyers post one request and get quotes from verified suppliers. Suppliers list free and reach active demand.
33 listings available
Dubai
Dubai
Dubai
Dubai
Dubai
Dubai
Dubai
Dubai
Dubai
Dubai
Dubai
Dubai
A crusher turns demolition rubble, quarry rock or oversize material into graded aggregate on site, saving the haulage of waste out and new stone in. Today 33 crushers are listed for hire on EquipmentsFinder from 3 suppliers, none of them verified yet, and every one of them is based in Dubai. Terex (6 listings), Sandvik (5) and Metso (4) are the brands named most often.
Crushers are specialist plant and the fleet is small, so the listings are worth reading in full: each one shows the model, the type and the supplier's phone and WhatsApp number. A posted request stating the material, the required output size and the tonnage reaches all three suppliers and any new ones, and stays visible on the inquiry board.
The renter pays EquipmentsFinder nothing. Other categories work the same way on the equipment rental hub.
A jaw crusher squeezes material between a fixed and a moving plate and is the usual primary unit: it accepts large feed, tolerates reinforcing bar in concrete rubble and produces a coarse product for a secondary stage or for use as sub-base.
An impact crusher breaks material by throwing it against hardened plates, producing a cubical product in one pass. It suits demolition concrete, asphalt and softer rock, and is often the single unit on a recycling job where a graded sub-base is the end product.
A cone crusher compresses material between a rotating mantle and a fixed bowl and is the secondary or tertiary unit for hard, abrasive rock, where it produces consistent aggregate sizes for concrete and asphalt production.
Most hire crushers in the UAE are track-mounted mobile units with an integrated feeder, engine and discharge conveyor, often paired with a mobile screen. They arrive on a low-bed trailer and are working within hours, which is what makes short-term hire on a demolition site practical.
Three figures decide the machine: the largest piece of feed, the product size required and the tonnes per hour needed. The feed opening must comfortably exceed the largest lump, the crusher type and setting must reach the product size, and the throughput must match the excavator or loader feeding it, or one of the two sits idle.
Material matters as much as size. Reinforced concrete calls for a jaw or impact unit with a magnet to remove steel; hard gabbro from the Northern Emirates calls for a jaw followed by a cone; and asphalt planings suit an impact crusher. State the material and the end use of the product in the request so the supplier can propose a one- or two-stage set-up.
No crusher listing currently publishes a daily or monthly rate, so no range can be quoted. Every supplier prices its own plant; a few show the figure on the listing, and the rest quote against the material, throughput and hire period.
Crushers are usually hired by the month or by the tonne processed, with mobilisation, an operator, fuel and a screen priced separately. Ask the supplier to state wear-part replacement, since jaw plates and blow bars are consumed quickly on abrasive material, and confirm whether VAT is included.
All 33 crushers listed today are crushers in Dubai, which puts the whole hire fleet within reach of demolition and infrastructure sites across the emirate.
No crushers are listed in Abu Dhabi today. The Dubai-based plants are track-mounted and travel by low-bed, so a request for an Abu Dhabi site reaches suppliers who can mobilise there.
No crushers are listed in Sharjah today, though the emirate's quarrying and recycling work is close enough to Dubai for the listed plants to serve it.
No crushers are listed in the Northern Emirates today. Quarry operators in Ras Al Khaimah and Fujairah generally own their plant; contractors with a short-term crushing job there should post a request and allow for mobilisation from Dubai.
Post a crusher rental request with the material, output size, tonnage, site and dates, and the suppliers respond directly. Related plant is on the equipment rental hub, and machines for purchase are under crushers for sale.
Rates are set by each supplier and depend on the crusher type, throughput, hire period and whether an operator, fuel and screening are included. No listing currently publishes a price, so post a request with the material and tonnage, or call the supplier from the listing, and ask for mobilisation and wear parts to be itemised in the quote.
Demolition concrete and asphalt usually suit an impact crusher, or a jaw crusher where the rubble is heavily reinforced. Hard quarry rock needs a jaw crusher as the primary stage and a cone crusher for finer product. Give the supplier the largest feed size, the product size required and the tonnes per hour, and they will propose the set-up.
That depends on the supplier and is settled when the supplier is contacted; no crusher listing currently states that an operator is included. Mobile crushing plants are usually hired with an operator because set-up, adjustment and blockage clearing need experience, but confirm this, along with who supplies the loader or excavator that feeds the plant.
Yes, track-mounted mobile plants are designed for exactly that. The practical minimum is set by mobilisation, since the plant travels by low-bed trailer and takes time to set up, so suppliers generally price short jobs by the tonne or with a minimum period. Describe the tonnage and the site in the request so the supplier can quote accordingly.
All 33 listed crushers are based in Dubai, and none are listed yet in the other six emirates. The three suppliers mobilise track-mounted plants by low-bed, so for a site in Abu Dhabi, Sharjah or the Northern Emirates a request reaches the same suppliers, who will quote the transport. Each listing shows where the plant is based.
Among the 33 crushers listed today, Terex is named on 6 listings, Sandvik on 5 and Metso on 4; the rest do not state a brand. All three are established makers of track-mounted jaw, impact and cone units, so the choice usually comes down to the available model's feed size and throughput rather than the badge.