XCMG XE45U Pro specs
- digging depth
- 3.342 m
- net power
- 29.7 kW (39.8 hp)
- operating weight
- 4,800 kg
- bucket capacity
- 0.11 m³
XCMG XE45U Pro dimensions
| Letter | Dimension | Metric and imperial |
|---|---|---|
| I | Overall length | 5.25 m17.22 ft |
| J | Overall width | 1.85 m6.07 ft |
| K | Overall height | 2.535 m8.32 ft |
| L | Track length | 2.249 m7.38 ft |
| M | Undercarriage width | 1.85 m6.07 ft |
| N | Shoe width | 0.35 m1.15 ft |
| O | Track length on ground | 1.8 m5.91 ft |
| P | Track gauge | 1.5 m4.92 ft |
| Q | Ground clearance (minimum) | 0.291 m0.95 ft |
| R | Tail swing radius | 1.215 m3.99 ft |
XCMG XE45U Pro specifications
XCMG XE45U (Kubota D1803 T4F) from XCMG North America's own XE45U brochure v4.11-2025-01; letters A-R are from the drawing on its p.2. No XE45U Pro-specific sheet was found on xcmg-usa.com: Equipment World's Pro launch story prints the same weight, dig depth, dump height and bucket force, but XCMG's launch release calls the Pro's undercarriage reinforced and widened, so widths and lifting figures may differ.
23 figures in 4 groups
Performance
- Max digging height
- 5.479 m
- Max dumping height
- 4.052 m
- Max digging depth
- 3.342 m
- Max vertical wall digging depth
- 2.68 m
- Max digging reach
- 5.715 m
- Min swing radius
- 2.28 m
- Max dozer lifting height
- 0.417 m
- Max dozer cutting depth
- 0.513 m
- Bucket capacity
- 0.11 m³Standard bucket
- Bucket digging force
- 38 kNISO
- Arm digging force
- 22 kNISO
- Top speed
- 5 km/hHigh range; low range 2.6 km/h
- Traction force
- 42 kN
- Gradeability
- 30 deg / 58%
Weight
- Operating weight
- 4,800 kg
Engine
- Engine model
- Kubota D1803, T4F, water-cooled 3-cylinder
- Net power
- 29.7 kW (39.8 hp)SAE J1349 at 2,200 rpm
- Max torque
- 151 Nmat 1,500 rpm
- Fuel tank
- 65 L
Hydraulics
- Pump flow
- 132 L/minTotal hydraulic capacity
- Auxiliary flow
- 90 L/minAUX maximum flow rate
- Max pressure
- 240 barMain system
- Hydraulic tank
- 36 L
Source: XCMG XE45U brochure, Technical Specifications p.2 (v4.11-2025-01, XCMG North America)
XCMG XE45U Pro service
What each system holds and when XCMG says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.
Loading the 3D machine...
Drag to turn · scroll to zoom · built from the maker's drawing; markers show where each system is
A 4.8-tonne mini excavator works its small engine hard; check oil and coolant every morning.
Confirm fluid grades in your machine's operator's manual: they vary by build year and climate.
Compare the XCMG XE45U Pro
The machines nearest in size, each drawn beside this one at the same scale.
Moving a XCMG XE45U Pro
A first look from the sheet. Your haulier or forwarder confirms the load.
- Length
- 5.25m
- Width
- 1.85m
- Height
- 2.54m
- Weight
- 4.8t
- RoadA beavertail or flatbed truck
- SeaA 20 ft flat rack, out of gauge (over-height): expect a surcharge
XCMG XE45U Pro prices and listings in the UAE
Asking prices on EquipmentsFinder, in AED, refreshed daily.
Typical hire, per daymedian of 26
AED 1,200 /day
No priced XCMG XE45U Pro for hire yet: this is all mini excavators
No XCMG XE45U Pro for rent listed right now.
Request a XCMG XE45U ProAbout the XCMG XE45U Pro
The XCMG XE45U Pro is a 4.8-tonne mini excavator with a Kubota D1803 engine rated at 29.7 kW (39.8 hp).
For transport it measures 5.25 m long and 1.85 m wide, and its tank holds 65 L of fuel.
A mini excavator: a compact tracked digger, light enough to trailer and narrow enough for gardens, basements and utility work between buildings.
Typical jobs: trenching for services, landscaping and garden work, footings and foundations, demolition in tight spaces.
XCMG XE45U Pro questions
How much does a XCMG XE45U Pro weigh?
4,800 kg (10,582 lb) in working order, with fuel, operator and standard attachment.
What engine and horsepower does the XCMG XE45U Pro have?
A Kubota D1803 engine rated at 29.7 kW (39.8 hp) net.
How deep can a XCMG XE45U Pro dig?
The XCMG XE45U Pro digs to 3.342 m (10.96 ft).
How wide is a XCMG XE45U Pro?
1.85 m (6.07 ft) wide, which decides the gates and paths it gets through.
What are the XCMG XE45U Pro's dimensions?
5.25 m long, 1.85 m wide and 2.54 m high, from XCMG's dimension drawing.
How do you transport a XCMG XE45U Pro?
Road: a beavertail or flatbed truck. Sea: a 20 ft flat rack, out of gauge (over-height): expect a surcharge.
What is the XCMG XE45U Pro's fuel tank capacity?
65 L (17.17 gal).
How much oil does a XCMG XE45U Pro take?
Hydraulic oil: 36 L (9.5 gal).
What are the XCMG XE45U Pro's main competitors?
The machines nearest it in size are the John Deere 50 P-Tier, the Bobcat E50, the Bobcat E42. Each has a side-by-side comparison on EquipmentsFinder.
Is the XCMG XE45U Pro sold in the UAE?
Not new through a Gulf dealer: it is sold in the USA and other markets worldwide. Used and imported machines do come up on EquipmentsFinder.
What is a XCMG XE45U Pro used for?
A mini excavator: a compact tracked digger, light enough to trailer and narrow enough for gardens, basements and utility work between buildings. Typical jobs: trenching for services, landscaping and garden work, footings and foundations, demolition in tight spaces.
Need a XCMG XE45U Pro on site?
Post the job - where, when and for how long. Suppliers with a machine contact you directly. Free to post.
