EF Logo

John Deere 333G vs Kubota SVL95-2s

The John Deere 333G is the heavier machine, at 6.36 t against 5.13 t, and the John Deere 333G has more power (72 kW against 64.9 kW).

The John Deere 333G is ahead on: more power, lifts or carries more, more digging or pushing force, bigger fuel tank, faster. The Kubota SVL95-2s is ahead on: more hydraulic flow, narrower to transport, lower to transport.

Below, every figure both makers publish sits side by side, with the John Deere 333G and the Kubota SVL95-2s drawn to the same scale from their dimension drawings.

  1. John Deere · compact track loader

    John Deere 333G

    Full specsPDF

  2. Kubota · compact track loader

    Kubota SVL95-2s

    Full specsPDF

  3. Add a model

At a glance

Bold is the machine ahead on each figure, with its lead.

FigureJohn Deere 333GKubota SVL95-2s
Operating weight6,356 kg5,125 kg
Gross powerHigher is better74.6 kW+4%71.9 kW
Rated operating capacityHigher is better1,848 kg+27%1,451 kg
Breakout forceHigher is better6,243 kgf+73%3,611 kgf
Pump flowHigher is better95 L/min152 L/min+60%
Fuel tankHigher is better114 L+5%109 L
Top speedHigher is better12.6 km/h+8%11.7 km/h
Width over tracksLower is better2.05 m1.962 m+4%
Overall heightLower is better2.3 m2.116 m+8%
Overall length3.71 m3.929 m

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Dimensions

Length without attachment3.1 m3.137 m
Overall length3.71 m3.929 mlength with bucket on ground
Width over tracks2.05 m1.962 mvehicle width, 450 mm tracks
Overall height2.3 m2.116 mheight to top of cab
Height to bucket hinge pin3.35 m3.264 mat max lift
Dump height with standard bucket2.69 mfoundry bucketNot published
Dump reach0.71 mNot published
Ground clearance0.24 m0.293 m
Angle of departure31°31°
Front turn radius2.18 mNot published
Dump angle at full height48°full lift heightNot published
Bucket rollback35°ground levelNot published
Ground contact lengthNot published1.667 m
Dump reach at maximum heightNot published1.035 m

Dozer blade (SmartGrade)

Blade width2.44 mNot published
Blade height0.74 mNot published
Maximum blade angle24°plus/minusNot published
Overall width with blade angled2.258 mNot published
Blade tilt8°plus/minusNot published
Length with dozer blade installed3.94 mNot published

Performance

Rated operating capacity1,848 kgSAE, 35% of tipping load1,451 kg35% of tipping load
Rated operating capacity (50% tipping load)2,640 kg2,074 kg
Tipping load5,280 kg4,147 kg
Breakout force6,243 kgf3,611 kgfbucket
Lift breakout force3,746 kgf3,058 kgf
Top speed12.6 km/h2-speed, high11.7 km/hhigh range
Travel speed (low)8.5 km/h8 km/h
Traction force5,221 kgftractive effort5,524 kgf

Undercarriage

Track width0.45 mstandard on 333G; 400 mm optional0.45 m
Ground pressure34.1 kPa (5.0 psi) with 450 mm tracks; 38.4 kPa (5.6 psi) with 400 mm tracks4.4 psi open cab / 4.5 psi closed cab
Track rollers (per side)5 triple-flange all-steel5

Weight

Operating weight6,356 kg5,125 kgopen cab, including 75 kg operator
Operating weight (closed cab)Not published5,250 kgincluding 75 kg operator

Engine

Engine modelYanmar 4TNV94FHTturbocharged, intercooledKubota V3800-TIEF4turbocharged
EmissionsEPA Final Tier 4 / EU Stage IVTier 4
Cylinders44
Displacement3.1 L3.8 L3,769 cc; bore x stroke 100 x 120 mm
Gross power74.6 kW (100 hp)ISO 14396 at 2,500 rpm71.9 kW (96.4 HP)SAE J1995, at 2,400 rpm
Net power72 kW (96.6 hp)SAE J1349 / ISO 9249 peak, at 2,500 rpm64.9 kW (87.0 HP)SAE J1349, at 2,400 rpm
Max torque395 Nmat 1,700 rpmNot published

Hydraulics

Pump flow95 L/minstandard152 L/min
Pump flow (high flow)156 L/mintotal with high-flow optionNot published
Max pressure23,787 kPa (3,450 psi)at couplers249.8 kgf/cm2auxiliary

Service capacities

Fuel tank114 L109 L
Hydraulic system, with tankNot published68 L
Hydraulic tankNot published38.1 L
DEF tankNot published18.8 L

Dimensions (top view)

Track gaugeNot published1.512 m
Width with standard bucketNot published2.032 m
Turning radius (rear)Not published3.22 mfrom centre, machine rear

Loader angles

Rollback angle at carry positionNot published27°
Max dump angleNot published43°

Sources: John Deere G-Series Compact Track Loaders 325G / 331G / 333G brochure DKAGCTLL (07-21) · Kubota SVL75-2 / SVL95-2s brochure 8935-01-AA (Kubota Australia, 2017-08)

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

0 m1 m2 m3 m
John Deere 333GKubota SVL95-2sSame scale, front edges and ground lined up.

John Deere 333G vs Kubota SVL95-2s: questions

Which is bigger, the John Deere 333G or Kubota SVL95-2s?

By operating weight the John Deere 333G is the biggest at 6.36 t, then the Kubota SVL95-2s at 5.13 t.

Which has more power, the John Deere 333G or Kubota SVL95-2s?

The John Deere 333G: John Deere 333G 74.6 kW (100 hp), Kubota SVL95-2s 71.9 kW (96.4 HP) (gross power), a 4% difference.

Which lifts or carries more, the John Deere 333G or Kubota SVL95-2s?

The John Deere 333G: John Deere 333G 1,848 kg, Kubota SVL95-2s 1,451 kg (rated operating capacity), a 27% difference.

Which has the bigger fuel tank, the John Deere 333G or Kubota SVL95-2s?

The John Deere 333G: John Deere 333G 114 L, Kubota SVL95-2s 109 L (fuel tank), a 5% difference.

Which is narrower to transport, the John Deere 333G or Kubota SVL95-2s?

The Kubota SVL95-2s: John Deere 333G 2.05 m, Kubota SVL95-2s 1.962 m (width over tracks), a 4% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.

More comparisons

EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.