EF Logo

Cat D6 vs Cat D8

The Cat D8 is the heavier machine, at 39 t against 22.1 t, and the Cat D8 has more power (271 kW against 161 kW).

The Cat D6 is ahead on: faster, narrower to transport. The Cat D8 is ahead on: more power, digs deeper, bigger bucket or body, more digging or pushing force, more hydraulic flow, bigger fuel tank.

Below, every figure both makers publish sits side by side, with the Cat D6 and the Cat D8 drawn to the same scale from their dimension drawings.

  1. Cat · dozer

    Cat D6

    Full specsPDF

  2. Cat · dozer

    Cat D8

    Full specsPDF

  3. Add a model

At a glance

Bold is the machine ahead on each figure, with its lead.

FigureCat D6Cat D8
Operating weight22,130 kg39,000 kg
Net powerHigher is better161 kW271 kW+68%
Digging depthHigher is better0.502 m0.576 m+15%
Blade capacityHigher is better5.7 m³10.3 m³+81%
Maximum drawbar pullHigher is better422 kN642 kN+52%
Pump flowHigher is better204 L/min259 L/min+27%
Fuel tankHigher is better341 L624 L+83%
Travel speed, forward (max)Higher is better10.7 km/h+4%10.3 km/h
Width over tracksLower is better2.54 m+9%2.79 m

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Dimensions

Overall length (with blade)5.436 mLength of machine, 6 SU blade straight7.91 m
Overall length (base machine)4.73 mLength of machine without blade4.76 mLength of basic tractor
Height (to top of cab)3.188 m3.53 m
Track gauge1.93 m2.08 mStandard; LGP 2.34 m
Width over tracks2.54 m2.79 m
Width over trunnions2.692 mNot published
Blade width3.312 m6 SU blade, across end bits4.038 mSU blade, across end bits; U 4263 mm
Blade height1.408 m6 SU blade1.747 mSU blade
Track length on ground2.964 m3.21 m
Ground clearance0.361 m0.622 m
Shoe width0.61 mMaximum track shoe width0.61 mStandard; LGP 965 mm
Grouser height0.065 mModerate service0.084 mExtreme service
Ripper (add to machine length)1.179 mNot published
Winch (add to machine length)0.441 mNot published
Height (to top of guardrail)Not published3.39 m
SU blade (add to basic tractor)Not published1.417 m
Single-shank ripper (add to basic tractor)Not published1.725 mTip at ground line, shank pin in middle hole
Drawbar (add to basic tractor)Not published0.295 m

Weight

Operating weight22,130 kg39,000 kg
Shipping weight19,178 kg10% fuel34,030 kg10% fuel, with ripper
Blade weight (blade and push arms)2,620 kgNot published
Operating weight (LGP)Not published37,585 kgWith drawbar
Blade weight (SU, with push arms)Not published4,539 kg

Performance

Blade capacity5.7 m³6 SU blade, ISO 9246; 6A angle blade 4.2 m³10.3 m³SU blade, ISO 9246; U 11.8 m³, angle 6.1 m³
Blade lift height1.18 m1.246 m
Digging depth0.502 m0.576 m
Maximum tilt at blade corner0.564 m0.573 m
Ground pressure54 kPaISO 1675488.5 kPaISO 16754
Maximum drawbar pull422 kN1.0 forward642 kN1.0 forward

Engine

Engine modelCat C9.3BCat C15
EmissionsBrazil MAR-1 / UN ECE R96 Stage IIIA (equivalent to U.S. EPA Tier 3 / EU Stage IIIA)Brazil MAR-1 / UN ECE R96 Stage IIIA (equivalent to U.S. EPA Tier 3 / EU Stage IIIA)
Net power161 kW (215 hp)At 2,200 rpm, ISO 9249 / SAE J1349271 kW (363 hp)At 2,050 rpm, ISO 9249 / SAE J1349
Gross power190 kW (255 hp)SAE J1995:2014 (ISO 14396: 187 kW)296 kW (397 hp)
Displacement9.3 L15.2 L

Transmission

TransmissionAutomatic, 3 forward / 3 reverse (half-step ranges)Powershift, 3 forward / 3 reverse (half-step ranges)
Travel speed, forward (max)10.7 km/h3.0 forward10.3 km/h3.0 forward
Travel speed, reverse (max)10.7 km/h3.0 reverse10.3 km/h3.0 reverse

Undercarriage

UndercarriageElevated sprocket, 42 section, 8 bottom rollers (HDXL)Elevated sprocket, 44 sections, 8 bottom rollers

Hydraulics

Pump flow204 L/minImplement pump, maximum, 1,750 rpm259 L/minImplement pump, 1,850 rpm
Max pressure276 barImplement relief 27 600 kPa240 bar

Service capacities

Fuel tank341 L624 L
Cooling system63 L72 L
Engine oil, with filter24.5 LEngine crankcase43 LEngine crankcase
Power train oil148 L1,000 hours
Final drives (each)18.2 L12.5 L
Hydraulic system, with tank77 LHydraulic tank 60 LNot published
Power trainNot published208 L
Hydraulic tankNot published69 L

Service intervals

Hydraulic oil6,000 hours6,000 hours
Coolant12,000 hours12,000 hours
Engine oil and filterNot published500 hours

Ripper

Ripper maximum penetrationNot published1.13 mSingle shank
Ripper maximum penetration forceNot published127 kNSingle shank
Ripper weight (single shank)Not published4,070 kg

Sources: Cat D6 Track-Type Tractors Technical Specifications AEXQ3981-00 (10-2024), build 20C (Aus-NZ, S Am) · Cat D8 Track-Type Tractor Technical Specifications AEXQ3722 (05-2024), build 22A (AME excl. Saudi Arabia, ANZ, China, S Am)

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

0 m1 m2 m3 m4 m5 m6 m7 m
Cat D6Cat D8Same scale, front edges and ground lined up.

Cat D6 vs Cat D8: questions

Which is bigger, the Cat D6 or Cat D8?

By operating weight the Cat D8 is the biggest at 39 t, then the Cat D6 at 22.1 t.

Which has more power, the Cat D6 or Cat D8?

The Cat D8: Cat D6 161 kW (215 hp), Cat D8 271 kW (363 hp) (net power), a 68% difference.

Which digs deeper, the Cat D6 or Cat D8?

The Cat D8: Cat D6 0.502 m, Cat D8 0.576 m (digging depth), a 15% difference.

Which has the bigger bucket, the Cat D6 or Cat D8?

The Cat D8: Cat D6 5.7 m³, Cat D8 10.3 m³ (blade capacity), a 81% difference.

Which has the bigger fuel tank, the Cat D6 or Cat D8?

The Cat D8: Cat D6 341 L, Cat D8 624 L (fuel tank), a 83% difference.

Which is narrower to transport, the Cat D6 or Cat D8?

The Cat D6: Cat D6 2.54 m, Cat D8 2.79 m (width over tracks), a 9% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.

More comparisons

EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.