EF Logo

Cat D5 vs John Deere 650

The Cat D5 is the heavier machine, at 17.1 t against 9.6 t, and the Cat D5 has more power (127 kW against 78 kW).

The Cat D5 is ahead on: more power, digs deeper, bigger bucket or body, more digging or pushing force, more hydraulic flow, bigger fuel tank, faster. The John Deere 650 is ahead on: narrower to transport.

Below, every figure both makers publish sits side by side, with the Cat D5 and the John Deere 650 drawn to the same scale from their dimension drawings.

  1. Cat · dozer

    Cat D5

    Full specsPDF

  2. John Deere · dozer

    John Deere 650

    Full specsPDF

  3. Add a model

At a glance

Bold is the machine ahead on each figure, with its lead.

FigureCat D5John Deere 650
Operating weight17,080 kg9,600 kg
Net powerHigher is better127 kW+63%78 kW
Digging depthHigher is better0.559 m+4%0.538 m
Blade capacityHigher is better3.5 m³+59%2.2 m³
Maximum drawbar pullHigher is better320 kN+111%152 kN
Pump flowHigher is better127 L/min+78%72 L/min
Fuel tankHigher is better315 L+56%202 L
Travel speed, forward (max)Higher is better9.8 km/h+23%8 km/h
Width over tracksLower is better2.5 m2.007 m+20%

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Dimensions

Overall length (with blade)5 mLength of machine, VPAT blade straightNot published
Overall length (base machine)4.644 m4.25 m
Height (to top of cab)3.085 m2.899 m
Track gauge1.89 mStandard; LGP 2160 mm1.55 mXLT; LGP 1753 mm
Width over tracks2.5 mWidth of tractor, standard shoes2.007 m
Blade width3.272 mVPAT blade, across end bits2.667 m
Blade height1.261 mVPAT blade1.067 mXLT standard straight blade
Track length on ground2.562 mStandard; LGP 3116 mm2.349 m
Ground clearance0.358 m0.345 mIn dirt
Shoe width0.61 mStandard; LGP 840 mm0.457 mXLT; LGP 711 mm
Length of machine (blade angled 24°)5.621 mWithout fuel tank guardNot published
Grouser height0.057 mModerate serviceNot published
Overall length with winch and fairleadNot published4.974 m
Tread depth (single-bar grouser)Not published0.049 m
Overall width with blade angledNot published2.456 m

Weight

Operating weight17,080 kg9,600 kg
Operating weight (LGP VPAT)19,070 kgNot published
Shipping weight16,850 kg10% fuelNot published
Blade weight1,090 kgVPAT bladeNot published

Performance

Blade capacity3.5 m³VPAT blade, ISO 9246; LGP 4.0 m³, SU 4.3 m³2.2 m³XLT standard straight blade, SAE
Blade lift height0.971 m0.801 m
Digging depth0.559 m0.538 m
Maximum tilt at blade corner0.257 mNot published
Maximum blade angle24°23°
Ground pressure47.6 kPaISO 1675444.1 kPaXLT; LGP 29.6 kPa
Maximum drawbar pull320 kN1.0 forward152 kN
Blade tiltNot published0.363 mXLT standard blade

Engine

Engine modelCat C7.1John Deere PowerTech PWX 4045 (4.5 L)
EmissionsBrazil MAR-1 / UN ECE R96 Stage IIIA (equivalent to U.S. EPA Tier 3 / EU Stage IIIA)EPA Tier 3 / EU Stage IIIA
Net power127 kW (170 hp)At 1,770 rpm, ISO 9249 / SAE J134978 kW (104 hp)
Gross power150 kW (201 hp)Not published
Displacement7.1 L4.5 L
Max torqueNot published450 Nm

Transmission

TransmissionFully automatic 3-speed (differential steer)Automatic dual-path hydrostatic
Travel speed, forward (max)9.8 km/h3.0 forward8 km/hForward and reverse; optional 9.7 km/h
Travel speed, reverse (max)12.2 km/h3.0 reverse8 km/h

Undercarriage

UndercarriageElevated sprocket, 40 section, 7 bottom rollersNot published
Track rollers (each side)Not published7

Hydraulics

Pump flow127 L/minImplement pump72 L/minAt unloaded high idle
Max pressure250 bar207 barSystem relief 20 684 kPa

Service capacities

Fuel tank315 L202 L
Cooling system41 L16.9 LWith recovery tank
Engine oil, with filter18 LEngine crankcase14.7 L
Power train160 LNot published
Final drives (each)8 L8.5 L
Hydraulic system80 LNot published
Hydraulic system, with tankNot published70.5 L

Service intervals

Engine oil and filter500 hours500 hours
Power train oil1,000 hoursNot published
Hydraulic oil6,000 hoursNot published
Coolant12,000 hours6,000 hours
Fuel filtersNot published500 hoursPrimary and final fuel filters
Final drive oilNot published1,000 hours
Hydraulic and hydrostatic filtersNot published2,000 hours
Hydraulic and hydrostatic oilNot published4,000 hours

Sources: Cat D5 Track-Type Tractor Technical Specifications AEXQ2553-03 (02-2023), build 17B (Afr-ME, APD, Aus-NZ, Eurasia, India, S Am ...) · John Deere 650 P-Tier Dozer brochure MD650PAU (US)

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

0 m1 m2 m3 m4 m5 m
Cat D5John Deere 650Same scale, front edges and ground lined up.

Cat D5 vs John Deere 650: questions

Which is bigger, the Cat D5 or John Deere 650?

By operating weight the Cat D5 is the biggest at 17.1 t, then the John Deere 650 at 9.6 t.

Which has more power, the Cat D5 or John Deere 650?

The Cat D5: Cat D5 127 kW (170 hp), John Deere 650 78 kW (104 hp) (net power), a 63% difference.

Which digs deeper, the Cat D5 or John Deere 650?

The Cat D5: Cat D5 0.559 m, John Deere 650 0.538 m (digging depth), a 4% difference.

Which has the bigger bucket, the Cat D5 or John Deere 650?

The Cat D5: Cat D5 3.5 m³, John Deere 650 2.2 m³ (blade capacity), a 59% difference.

Which has the bigger fuel tank, the Cat D5 or John Deere 650?

The Cat D5: Cat D5 315 L, John Deere 650 202 L (fuel tank), a 56% difference.

Which is narrower to transport, the Cat D5 or John Deere 650?

The John Deere 650: Cat D5 2.5 m, John Deere 650 2.007 m (width over tracks), a 20% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.

More comparisons

EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.