Cat D11 vs Cat D11 XE
The Cat D11 XE is the heavier machine, at 108.3 t against 106.6 t, and the Cat D11 XE has more power (742 kW against 634 kW).
The Cat D11 XE is ahead on: more power.
Below, every figure both makers publish sits side by side, with the Cat D11 and the Cat D11 XE drawn to the same scale from their dimension drawings.
At a glance
Bold is the machine ahead on each figure, with its lead.
| Figure | Cat D11 | Cat D11 XE |
|---|---|---|
| Operating weight | 106,614 kg | 108,314 kg |
| Net powerHigher is better | 634 kW | 742 kW+17% |
All specifications
Every figure the makers publish. Search for one, or show only those that differ.
Dimensions
Overall length (with blade)8.579 m8.579 mWith SU blade
Overall length (blade and ripper)10.525 mSU blade and single-shank ripperNot published
Overall length (base machine)6.16 mBasic tractor (with drawbar, 11: same)6.16 mBasic tractor, also with drawbar
Length with single-shank ripper8.107 mNot published
Height (to top of cab)4.405 mFOPS cab, incl. grouser4.405 mFOPS cab; includes grouser height
Height (to top of ROPS/canopy)4.723 mIncl. grouserNot published
Height (to top of stack)4.549 mIncl. grouser4.549 mIncludes grouser height
Track gauge2.896 m2.896 m
Width over tracks3.782 mWidth without trunnions, standard shoeNot published
Width over trunnions4.379 m4.379 m
Blade width5.584 m11SU ABR, over end bits; 11U ABR 6340 mmNot published
Blade height2.866 m11SU ABR; 11U ABR 2875 mmNot published
Track length on ground4.444 m4.444 m
Ground clearance0.798 m0.798 m
Drawbar height0.942 mCentre of clevisNot published
Shoe width0.71 mExtreme service; 810/915 mm optional0.71 mStandard; Carrydozer shoe 915 mm
Grouser height0.101 mExtreme service0.101 m
Overall length (with U blade)Not published8.641 m
Overall length (with single-shank ripper)Not published8.107 m
Overall length (with multi-shank ripper)Not published8.427 m
Height (to top of canopy)Not published4.723 mROPS/canopy; includes grouser height
Width without trunnionsNot published3.782 mStandard shoe
Drawbar height (centre of clevis)Not published0.942 m
Track pitchNot published0.318 m
Weight
Operating weight106,614 kg108,314 kg
Shipping weight61,124 kgNot published
Blade weight (11SU, with push arms and cylinders)17,126 kgNot published
Operating weight (Carrydozer)Not published117,007 kg
Performance
Blade capacity27.2 mÂłNot published
Digging depth0.66 m11SU, nominal pitchNot published
Blade lift height1.669 m11SU, nominal pitchNot published
Maximum tilt1.7 m11SU, left handNot published
Ripper maximum penetration1.612 mSingle shank, standard tipNot published
Ripper maximum penetration force294 kNSingle shank, shank vertical (294/303 kN)Not published
Ripper pryout force654 kNSingle shankNot published
Engine
Engine modelCat C32BCat C32B
EmissionsEquivalent to U.S. EPA Tier 2 (China NR III certified); Tier 4 Final / EU Stage V also offeredU.S. EPA Tier 4 Final / EU Stage V (Tier 2-equivalent rating also offered)
Net power634 kW (850 hp)742 kW (861 hp)
Gross power670 kW (899 hp)Forward, SAE J1995; reverse 757 kWNot published
Displacement32.1 L32.1 L
Net power (reverse)Not published713 kW (956 hp)
Transmission
TransmissionPlanetary powershift, 3 forward / 3 reverse (D11 XE: dual-path electric drive)Electric drive (generator and two electric motors); 3 forward / 3 reverse speed ranges
Travel speed, forward (max)12.2 km/h3.0 forwardNot published
Travel speed, reverse (max)14.7 km/h3.0 reverseNot published
Travel speed, forward 1Not published4 km/h
Travel speed, forward 2Not published7.1 km/h
Travel speed, forward 3 (max)Not published11.3 km/h
Travel speed, reverse 1Not published4.9 km/h
Travel speed, reverse 2Not published8.7 km/h
Travel speed, reverse 3 (max)Not published11.3 km/h
Undercarriage
UndercarriageElevated sprocket, 41 shoes and 8 track rollers per sideNot published
Ground contact areaNot published6.3 m² (8.1 m² with 915 mm Carrydozer shoes)
Shoes per sideNot published41
Track rollers per sideNot published8
Carrier rollersNot published1 per side (optional)
Hydraulics
Pump flow670 L/minCombined implement output at 1,800 rpm670 L/min
Max pressure310 barNot published
Service capacities
Fuel tank1,763 LUsable volume1,763 LUsable volume
Cooling system177 L192 L
Engine oil, with filter133 LEngine crankcase sump refill133 L
Power train454 LTotal volume494 L
Final drives (each)40 LNot published
Hydraulic system, with tank245 LTank and chassis; tank only 160 L245 LTank and chassis
Power train, refill volumeNot published415 L
Final drive (each)Not published40 L
Roller frames, eachNot published94 L
Hydraulic tankNot published160 L
Hydraulic system with blade and ripperNot published445 LStandard
Hydraulic system with blade and ripper (Carrydozer)Not published540 L
Service intervals
Hydraulic oil6,000 hoursNot published
Coolant12,000 hoursNot published
Blades
SU blade capacityNot published27.2 mÂłSemi-universal
SU blade widthNot published5.584 m
U blade capacityNot published34.4 mÂł
U blade widthNot published6.34 m
Reclamation universal blade capacityNot published42 mÂłSAE J1265
Reclamation universal blade widthNot published6.395 m
Carrydozer blade capacityNot published43.6 mÂłSAE J1265
Carrydozer blade widthNot published6.704 m
Ripper
Single-shank ripper max penetration depthNot published1.612 m
Single-shank ripper max penetration forceNot published303 kN
Single-shank ripper pryout forceNot published654 kN
Deep-ripping single-shank max penetration depthNot published2.172 m
Deep-ripping single-shank max penetration forceNot published304 kN
Deep-ripping single-shank pryout forceNot published651 kN
Multi-shank ripper beam widthNot published3.33 mAdjustable parallelogram
Multi-shank ripper max penetration depthNot published1.1 m
Multi-shank ripper max penetration forceNot published307 kN
Multi-shank ripper pryout forceNot published644 kNWith one tooth
Sources: Cat D11/D11 XE Dozers Technical Specifications AEXQ4647-01 (09-2026), build 07B (Global) · Cat D11 XE technical specifications (Cat's own spec data as published on the NMC Cat dealer product page, 2026)
Drawn to scale
Side views measured off each maker's dimension drawing, front edges and ground lined up.
Cat D11 vs Cat D11 XE: questions
Which is bigger, the Cat D11 or Cat D11 XE?
By operating weight the Cat D11 XE is the biggest at 108.3 t, then the Cat D11 at 106.6 t.
Which has more power, the Cat D11 or Cat D11 XE?
The Cat D11 XE: Cat D11 634 kW (850 hp), Cat D11 XE 742 kW (861 hp) (net power), a 17% difference.
Where do these figures come from?
Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.
Can I rent or buy these machines in the UAE?
Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.
