Cat D10 vs John Deere 750

The Cat D10 is the heavier machine, at 70.3 t against 17 t, and the Cat D10 has more power (450 kW against 131 kW).

The Cat D10 is ahead on: more power, bigger bucket or body, more hydraulic flow, bigger fuel tank, faster. The John Deere 750 is ahead on: digs deeper, narrower to transport.

Below, every figure both makers publish sits side by side, with the Cat D10 and the John Deere 750 drawn to the same scale from their dimension drawings.

Cat · dozer
Cat D10
Change modelFull specs PDF
John Deere · dozer
John Deere 750
Change modelFull specs PDF
Add a modelUp to four

At a glance

Bold is the machine ahead on each figure, with its lead.

Figure	Cat D10	John Deere 750
Operating weight	70,256 kg	17,041 kg
Net powerHigher is better	450 kW+244%	131 kW
Digging depthHigher is better	0.641 m	0.648 m+1%
Blade capacityHigher is better	18.5 m³+374%	3.9 m³
Pump flowHigher is better	424 L/min+226%	130 L/min
Fuel tankHigher is better	1,269 L+251%	362 L
Travel speed, forward (max)Higher is better	12.5 km/h+29%	9.7 km/h
Width over tracksLower is better	3.311 m	2.44 m+26%

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Differences only(56)

FigureCat D10 John Deere 750

Dimensions

Overall length (with blade)7.416 mLength with 10SU blade, no rear attachmentNot published

Overall length (blade and ripper)9.158 mSU blade and single-shank ripperNot published

Overall length (base machine)5.324 mOverall length, basic dozer5.359 m

Length with single-shank ripper7.081 mNo bladeNot published

Length with U-blade7.75 mNot published

Length with multi-shank ripper7.241 mNot published

Height (to top of cab)4.134 mFOPS cab, incl. grouser3.248 m

Height (to top of ROPS/canopy)4.406 mNot published

Height (to top of stack)4.356 mNot published

Track gauge2.55 m1.88 mXLT; LGP 2134 mm

Width over tracks3.311 mWidth without trunnions, 610 mm ES shoes2.44 m

Width over trunnions3.759 mNot published

Blade width4.94 m10SU ABR blade, over end bits; 10U 5260 mm3.296 m

Blade height2.12 m10SU / 10U ABR1.444 mXLT straight PAT blade

Track length on ground3.88 m3.093 m

Ground clearance0.725 m0.358 mIn dirt

Shoe width0.61 mExtreme service; 710/786 mm optional0.559 mXLT; LGP 860 mm

Grouser height0.093 mNot published

Overall length with extended drawbarNot published5.602 m

Tread depth (single-bar grouser)Not published0.069 m

Overall width with blade angledNot published3.011 m

Weight

Operating weight70,256 kg17,041 kg

Shipping weight50,684 kg10% fuel, FOPS cab, 610 mm ES shoesNot published

Blade weight (10SU, with cylinders and push arms)9,421 kgNot published

Performance

Blade capacity18.5 m³10SU ABR, SAE J1265; 10U ABR 22.0 m³3.9 m³XLT straight PAT blade, SAE; LGP 4.5 m³

Digging depth0.641 mNominal blade pitch (640.87 mm)0.648 m

Blade lift height1.523 mNominal blade pitch0.904 m

Maximum tilt1.43 m10SU, each sideNot published

Ripper maximum penetration1.504 mSingle shank, standard tipNot published

Ripper maximum penetration force219 kNSingle shank, standardNot published

Ripper pryout force512 kNSingle shank, standardNot published

Maximum blade angleNot published24°

Blade tiltNot published0.432 mXLT

Maximum drawbar pullNot published259 kN

Ground pressureNot published43.7 kPaXLT; LGP 30.5 kPa

Engine

Engine modelCat C27John Deere PowerTech PVS 6068 (6.8 L)

EmissionsU.S. EPA Tier 2 equivalent (Tier 4 Final / EU Stage V also offered)EPA Final Tier 4 / EU Stage V

Net power450 kW (603 hp)131 kW (175 hp)SAE net rated power at 1,700 rpm

Gross power471 kW (631 hp)Forward, SAE J1995; reverse 571 kWNot published

Displacement27 L6.8 L

Transmission

TransmissionPlanetary powershift, 3 forward / 3 reverseAutomatic dual-path hydrostatic

Travel speed, forward (max)12.5 km/h3.0 forward9.7 km/hForward and reverse; optional 11.0 km/h

Travel speed, reverse (max)15.7 km/h3.0 reverse9.7 km/hOptional 11.0 km/h

Undercarriage

UndercarriageElevated sprocket, suspension type, 44 shoes and 8 track rollers per sideNot published

Track rollers (each side)Not published8

Hydraulics

Pump flow424 L/minImplement pump, 2,010 rpm130 L/minAt unloaded high idle

Max pressure280 barLift cylinder relief valve 28 000 kPa250 barSystem relief 24 993 kPa

Service capacities

Fuel tank1,269 LTotal; usable 1224 L362 L

Cooling system175 LRefill, Tier 4 Final engine31.4 LWith recovery tank

Engine oil, with filter103 LEngine crankcase sump28 L

Power train308 LTotal volumeNot published

Final drives (each)23 LNot published

Hydraulic tank160 LHydraulic system, tank only98 LReservoir with filter

Service intervals

Hydraulic oil6,000 hoursNot published

Coolant12,000 hoursNot published

Hydraulic and hydrostatic oilNot published4,000 hoursExtended from 2,000 h on the previous model

Sources: Cat D10 Dozer Technical Specifications AEXQ3209-03 (09-2026), build 07A (Global) · John Deere 750 P-Tier Dozers brochure MD750PAU (US)

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

Cat D10John Deere 750Same scale, front edges and ground lined up.

Cat D10 vs John Deere 750: questions

Which is bigger, the Cat D10 or John Deere 750?

By operating weight the Cat D10 is the biggest at 70.3 t, then the John Deere 750 at 17 t.

Which has more power, the Cat D10 or John Deere 750?

The Cat D10: Cat D10 450 kW (603 hp), John Deere 750 131 kW (175 hp) (net power), a 244% difference.

Which digs deeper, the Cat D10 or John Deere 750?

The John Deere 750: Cat D10 0.641 m, John Deere 750 0.648 m (digging depth), a 1% difference.

Which has the bigger bucket, the Cat D10 or John Deere 750?

The Cat D10: Cat D10 18.5 m³, John Deere 750 3.9 m³ (blade capacity), a 374% difference.

Which has the bigger fuel tank, the Cat D10 or John Deere 750?

The Cat D10: Cat D10 1,269 L, John Deere 750 362 L (fuel tank), a 251% difference.

Which is narrower to transport, the Cat D10 or John Deere 750?

The John Deere 750: Cat D10 3.311 m, John Deere 750 2.44 m (width over tracks), a 26% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.